Haier 10543027 Installation and User Manual

Category
Split-system air conditioners
Type
Installation and User Manual
Haier
What The World Comes Home To ''_
RoomA_rC_di#_ey
Centre1
Control
Reedie_tre_tien_beforeie_tefliego
@fl F87Z-33Z_3639fer qne#ieeseepertseed_ereices
tiretesin_tre_tien_eventdepreceder_FieeteRetiee.
Peerteete_qeeetioae_eecereeetleepi#cesst Pee#etiee,cempeeezie _-877o337o363_o
Lee_ee_ne_re_deneeantesdeine_e_ere_eperete
O010543027 U_eee_ e#_-877-337o3_3eei tieeepre_e_te__ebrerep_et;teeoeet"
Thank You for buying a dependabb, energy saving and easy to operate
HALERroom air condifionen This manual contains usefuJinformation for
you to maintain, operate, in4aH and safely use your room air conditioner.
Your air conditioner deans, cools and dehumidifies the air in your room to
provide you with the ultimate Jevd of comfort.
Please read instructions carefuJJybefore using the producL AJso, do not
Forget to fiJl out and maiUthe Product Registration Card
Record Your Mo(JeJand $eriaJ Number.
For aHyour service calls during the warranty period the foJlowing
information will be needed_ Attach the sales receipt to this guide and keep
for future reference. This information can be obtained from the serial pJate,
which is on your air conditioner. This is either on the cabinet (side or back)
or you may have to remove the front grille to bcate iL
Modal Number: ..............................................................
Serial Number: ...............................................................
Date of Purchase: ...........................................................
Dealer's Name: ..............................................................
Dealers Address: ............................................................
Dealers Phone Number: ...................................................
?AOLE
RECEPTACLE ANO FUSE TYPES
RATEDVOLTS 125/60 250/60
AMPS 1S 2.0 15 20 30
WALL OUTLET
_USE S(ZE ) 5 20 _ _5 20 _ 30
r_mMEDE_Y FUSE
(c_ ¢it_u_ br_k_r) Pmug P|ug pmug
1)
Air conditioner must be connected to proper dectricaJ outlet with the
correct dectricaJ supply. (see table)
Proper grounding must be ensured to reduce the risk of shock and fire.
DO NOT CUT OR REMOVE THE GROUNDING PRONG. Jfyou do
not have a three-prong electric receptacle outlet in the wall, have a
certified dectrician install the proper receptacle. The wdJ receptacle
MUST be properly grounded.
Do not use if power cord is frayed or otherwise damaged_
Also avoid using it if there are cracks or abrasion damage
along the lengfh, plug or connector.
DO NOT USEAN ADAPTER OR AN EXTENSION CORD.
When installing your air conditioner in a window, make sure the window
is strong enough to hdd the wright of the air conditioner.
You also want to secure and correctly install your air conditioner properly
to prevent it from falling. Extra brackets and or support may be required
depending on your window.
6) Do not block airflow inside or outside the air conditioner with blinds,
drapes, protective covers, shrubs or bushes_
7) Be careful of sharp edges on the front and rear fins of the unit that could
cut and cause serious injury.
8) Be careful when lifting the air conditioner to install or remove the uniL
Always usetwo or more people for this.
9) Always unplug the dr conditioner before servicing it or moqng it.
2
English
PAGE
A Word Fro_ Haier 1
Product Reglstratlon 1
Safety Precautions 2
Warnings 4
£UectrlcaU Safety 4
Tips 5
Energy $avlng Gulde 5
Features 6
Operatlng Gulde 7-8
Normal Operating Sounds 7
Operating Instructions 7o8
Uns_Hattions 9- ! 8
PartsSupplied 10
TooJs 1 1
Stepsfor installation 19
CUean and Care Guide 20
TroubUeshootlng _:1o22
Warranty Jnf@rmati@n :23
i ¸¸¸%¸¸
FoJJowingthe safety messages is very important.
These messages can save you from being injured or kiJJed.
Warning symboJsaJert you to be carefuJ and means Danger. AJways
foJJowinstructions to be safe and reduce chances of iniury or deatk
Warning and Danger signs wiJJprecede safety messages.
Grounding: This room air conditioner mustbe grounded.
Grounding reducesthe risk of dectric shockby
providing an escapewire for the eJectriccurrent.
Thepower cord hasa grounding wire with a
grounding pJug.PJugit into an outJetthat is
properJyinstdJedand grounded_
WARNUNG:
improperuseof thegrounding
pJugcan resuJtin a risk of eJectricshock.
CaJJa qualified dectridan if you don't understand
thegrounding instructionsor if you are not
sureif theair conditioner is properJygrounded.
Jfthe waJJoutbt is not grounded, pJeasecontactan
eJectridanto haveit repJacedwith a properJy
grounded outJet.
Do not, under any circumstances, cut or remove the
third (ground) prong from the power ¢@rdo
Adapter PUug: We strongJyadvise against using an adapter pJug.
4
eAirConditionersaredesignedforuseinadoublehungwindowor
throughthewallinstallationonly_(Asapplicableinyourmodel)
Whileinstallingunitbesure to flit air conditioner 1/4 degree ouhvard to
have the water drip outside the house_
o Install the unit on the north side as normalmythat is the shaded side. This
will enhance _heoperation of your unit.
_e Window has to be strong for installation_ Extra brackets and or support
may be required depending on your window. (Brackets and Supports
not induded in all models)
o Measure the window before installing, if the window is bo big for the
unit you may require professional installation,
_e Use correct electric voltage and proper ampere for the unit to run
effectively.
Only let a certified electrician do any modifications to your electrical
outlet,
Use a dedicated line for the operation of your air conditioner to avoid
the possibiJih/of an electrical surge,
e When installing your air conditioner make sure to seal all areas where
there is a possibilib, of air bakage,
Airflow should not be blocked inside either by curtains, drapes or
furniture or outside by shrubs or bushes_
Do not needbssly use on ebctrical light or other appliances that
produce heat,
Keep the vent dosed on the air conditioner when in the coomingfunction.
Keep the blinds and the drapes drawn on all the other windows.
While cooking use an exhaust fan in the kitchen to remove the excess
heat produced_
Always usethe correct BTU size air conditioner to cool the room to
affain optimum efficiency.
4-way
airflow
iiiJiiii_i
_iiiiiiii_
_iiiiiiii_
iiiJiiiiiiiii
iiiJiiiiiiiii
easy
access
filters
sHide°out
chassis
(AH features not on ohmmodels)
control
pand
Temperature Set Knob
This knob adjusts the temperatureof the ain
Higher thesetting the coobr theair temperature.
with this knob you can setthe temperatureto your
desired comfort bveL Min, Cod being thewarmest
and Max. Cod being the cddest
2. Functlor_ S_e_Knob
with this knob you can cantrd thefan speedas
well as the cooling speed,There are 3 knob
positionson theA!C for you to selectfrom. LO will
circulate air at the lowestvelocity MED at the
middle levd and HJwill circulate at themaximum.
You have 2 FanOnly speedsto choosefrom HI and
LO.
This feature heJpsyou to exhaustany stale
unwanted air in the room and draw fresh outside
air in the room. To cirdate theair, bring thelever
to theopen position. (Thelever should be in the
closed mode to avoid lossof cool air to theoutside.)
4 Way A_r Fmow
Theseair directional buvers let you control the
direction of theairflow in your required direction
Theairflow can be directed
up - down - right side- left side
5.smldoOotChossis(ootiooJmmodoJ0)
your air conditioner becomesmore versatiJewith
this feature You have theoption to insiaJlthe unit in
a window or a wall.
6. Window |nstaJJ Kito
Enabbsyou to installthe air conditioner in a
doubb hung window Extra bracketsor support
may be needed depending on your window
English
©pe o tiHg B@ ds
FoJJowingsoundsare normaJJyheard during the operation of an air conditioner.
* Thermostatclicks.As the thermostatcycleson/off you will
hear this sound.
Cod airflow movementas dictated by the set fan speed
®Water sounds.This is normaJsinceyour air conditioner actsas a
dehumidifier aJso.Thusyou wiJJhear water soundsfrom water drops
falling on the condensen
o As the refrigerant flows through the inner seaJedtubing a
rushing noise may be heard.
RattJingor vibrating noisesmay be heard due to poor waJJ
or window instoJJation.
High pitch compressor soundmay be hear&
LO
A/C
OFF MED
A/C
HR HI
FAN A/C
fig, # 1
FUNCTmON SET
5 6
4
2
1
MIN COOL
10
MAX COOL
TEMPERATURE SET 7
E e/i h
After instaJJingyour air conditioner, pJugit into the proper
dectricd outRetin the wall
1) SelectMed. A/C on the FunctionSetknob_
2) SettheTemperatureSetknob at the mid JeveJsetting. ThiswiJJturn on
your air con@ionen
3) Youcan setthe thermostatfrom Min Cod to Max Cool Min Cod being
thewarmest Max Cod being the cddest_
4) Your air conditioner has 1 or 2 Fanspeedsdepending on your modal
purchased and 3 A/C settings_
5) If your air conditioner has a Ventcontrol make sure that it is on dose.
Leaveit open onJyif you need to recycle the stale room dn By Jeavingit
dosed you will retain the cod air in the room_
6) Letyour air conditioner run for a few minutesbefore adiusting to the
desired settings.
7) Remember the compressor of your air conditioner wiH riot work
when the temperature goes bdow 65°F.
8) AJsowhen you shut off the air conditioner wait for 3 minutesbefore
turning it on again. This is the compressorcycle time_
9) If you haveany trouble in operating your air conditioner please refer to
theTrouble Shooting section_
English
Beforeyou install your air conditioner checkthe following:
The unit is free of aHobstructions inside and outside the room e.g. drapes,
curtains, furniture, pRants,shrubs,bushes,trees,other structureslike building,
garage etc.Air conditioner musthave dear unobstructed airflow through the
condenserto remove the heal
2) Thewindow is strong enough to hold the weight of the air condifionen
Extra brackets or supportsmay be needed depending on your windows.
(Bracketsor Supports not provided in all modds/
3) Thewindow siJJand track are strong enough to hold the weight of the
air conditioner.
4) ThewaJJis strong enough to hdd the unit. Extra brackets or supports may be
needed depending on thewall (Bracketsor Supports not provided in dJ modds).
5)
A 71
Asl
Ag)
There is adequate and proper power suppJynear theair conditionen
DO NOT useadapter pJugs.
DO NOT useextension cords.
DO NOT cut or removethe ground prong_
DO NOT modify the pJugor thedectrkaJ waJJoutJetin any way.
if pbg does not fit the dectrical outJethavea certified dectrician do the
necessarychange.
A10) DO NOT connectelectrical power to the unit before installation.
_11) DO NOT useif power cord isworn out, frayed or otherwise damaged.
Avoid using if there are cracks or abrasion damage along the Jength,
pJugor connectiom
] 2) DO NOT install into any existing cabinet or sleevewhich does not haveside
and top air vents, g
Parts SuppUied
Parts Supplied
curtain
affachment
screws 13/32"
'window sill curtain sash
screws
31/32"
Mode[ HWAOSXCA,HWFOSXCA,HW_O7XCA
HWS05XCA, HWSO6XCA,HWF05XCB
basepan angle
top rail
PartsSupplied
curtain
z. window sash
gasket
_--'_-_-_ /_ top rail Casement to
_ gasket curtain sash screws window
icd'![_ [:::nWu_ nd
tion
([eftand right) Mode[:HWSI4XCA,HWS18VCA,HWS20VCA
[eft and right
side curtains
lop rai[
n angle
[eftand right
sidecurtains
10
YouwillneedtohavetheFollowingtoolstohelp you in the in4aHafion of
your air condifioner_
®Scissors
_PhillipsScrewdriver
oStandard Screwdriver
oPJiers
_Wrench
DriJJand DriHBits
oTapeMeasure
oGJoves
oLeveJ
_Sockets
11
in#rimingUnit intoA Window
Window Opening Requirements
Theair conditioner isdesigned to fit into doubUeor singb hungsashtype windows. Eachof the
units comes with an MstaHafion kit that provides adiusfabJe mounting louvers, to fill the gaps
between the sidesof the unit, and the window frame. Thechart below reflectsthe dimensions
of theunitswith,and without installationkits. Measureyourwindow openingwidth and compare
it to the chart bdow to ensure that it meetsthe minimum and maximum window width requirements.
/:
i i _i ill
I_ ° -I 0
HWA05XCA HWF05XCA HWF07XCA HWS08XCA HWS10XCA HWS]2XCA
HWS05XCA HWSO6XCAHWFO5XCB HWS14XCA HWS18VCA HWS20VCA
_ode HWA05XCAI HWF05XCA HWS05XCA HWS08XCA HWS 10XCA HWS ] 4XCA HWS 18VCA
HWF07XCA HWSO6XCA HWS12XCA HWS20VCA
Dirnensbn_ HWF05XCB
AIinch) 21_" 10_329" 11_6"
B(inch) 143'' 14196_' 13i_ _' 16_" 17_" 183"
C(inch) ]4_ I' 13 i_" ]6"_ '_ J719"
D(inch) Max 34_,, 34g I' 36_,, 40ll_" 443"
D(inch) Min 2385'' 2412 '' _92" 26_" 301_" 32/2 "
CaseHigh la_" is43' 16_" 1;'_"
Case Width 191_!'' 2032 '' 2035" 22t_6 " 2636 ' 234 '
Models: HWAOSXCAand HWF05XCA,HWF07XCA,HWSO5XCA,HWSO6XCA,HWFOgXCB
I SSEMBLE
CURTAINS
Unpack unit on floor next to
installation location
SJlde Jefhhand curtain assembly into
left ends of top and boffom rails
Repeat for right-hand curtain
assembly Fasten curtain retainer
strips to sides of outer case with six
13/32" screws
For HWSO5XCA,HWSO6XCA
Remove two screws located in
the top of the outercase,Remove
two screws located in the rear Cautlon:
of _heoufercase
or grille to extreme
temperatures
APPLYWmNDOW
SASHGASK_
Raise indoor sash Measure width
of window sash Cut window sash
gasket to length and apply to
bo_om of window sash
Cut window siJJgasket to length
and apply to top of the window siJJ
12
PREPARE
WINDOWFOR
iNSTALLATiON
hspect window track_ sash, and sill
for itsabiUit'ito support the weight of
air conditionen
Measure width between wndow
readings toensure UnstantMount
will fit window frame UnstaniMount
mode)sare designed for windows
(the detail see page 12)
UnstontMount kit supp)iedwith unit
isdesigned for mounting in most
doubb_hung windows w_out
_torm w_r_dows. For instoHationin
window frame with storm window,
modify sill by adding wood stripsto
inner and outer sills Thisraises
unit and eUiminatesinterference of
storm window frame
Stormw_ndow instoHat_on
Ufstormwindow frame does not allow
adequate clearance below sill(I/2"
required}, removestormwindow
frame or create clearance by adding
a wood strip (atleast 1 1/2" wide)
along entire width of siJJFasten
wood slrip to sill with at least three
countersunk wood screws (not
supplied with kit) Thisprovides a
smooth surface for mounting air
conditioner: 1/2"
Mobile home window instomr_tion
Add wood strip (at least 1 1/2" wide)
along entire width of window siJJ
Thickness of wood strip should match
height of front lip on window frame
Fasten wood strip to sill with a
minimum of _flree countersunk wood
screws (not supplied with kit) This
provides a smooth surface for
mounting air conditionen
Mustbe a minimum
oFI/2" todea_
botlomrail onuni_
T
o i
iNSTALLUNiT iN
WINDOW
Placeunit in window Lower sash
until it restsbehind front flange of top
rail Bottomrail mustrestbehind
window sill with a leveladiust unit
to a ]/2 bubble slope to the rear for
proper wa]er drainage
fLevd
o
Curtain assembly cut
away for darity
iNSTALL
BASEPANANGLE
Back front attachment screw out
several turns and slip BasepanAngle
over screw head Snugscrew with
angle restingon window ledge
UnstollTwo 31/32 '_screws through
angle into window ledge Repeat for
opposite side
31/32'
screws
Basepal
angle
13
English
iNSTALLSEAL
GASKET
Cut window seal gasket to w@h of
window Stuff window sod gasket
between outdoor window gUass
and top of indoor sash This will
stop air bakage which reduces
efficiency.
Modds: HWS08XCA, HWS10XCA,HWS12XCA,
HWS14XCA,HWS 18VCA,HWS20VCA
I REPAREUNiT
FOR
iNSTALLATiON
Unpack unit on floor next to
installation bcation
Remove front aitachrnent screw
Remove two side attachment screw
(HWS14XCA,HWSl 8VCA,HWSg0VCA)
Separate the outercase from the front
with a putty knife at the catch points
designated by the arrows
Remove one screw securing
basepan locking bracket Remove
two screws located in the rear of the
outercase, securing k,asepan to
outercase Using the basepan handle,
slowly and evenly pull chassis out
from outer case
Note: Cover putty knife blade with
masking tape to guard against
damage of the units finish The filter
is removed in this illustration for
clarity only
Caution: Never expose plastic
front or grille to extreme
temperatures
14
ASSEMBLE
CURTAINS/TOP
RAIL
Removepaperbacking from toprail gasket
andadhereto beltomoftop ral'L
Installtop rail with four 13/32" screws.
into leftendof tap and bottom
rails. Repeatfor right-handcurtain
assembly.Fastencurtain reteiner
stripstosidesof outercasewith
eight 13/32 nscrews(sixfor HWS08XCA,HWS10XCA,HWS12XCA ).
PREPARE
WINDOW FOR
INSTALLATION
Inspectwindowhack,sash,and sill
for itsability to supportthe weight of
air conditioner.
Measurewidth betweenwindow
moldingstoensureinstantMount
will fit window frame. InstantMount
modelsare designedfor windows
wide (thedetail seepage 12)
instantMountkitsuppliedwith unit
isdesignedfor mountingin most
double-hungwindows without
stormwindows. Forinstallationin
window flame with stormwindow,
modify sill byadding wood stripsto
innerand outer sills.Thisraises
unitand eliminatesinterferenceof
stormwindow frame.
Stormwindow installation
Ifstormwindow framedoesnotallow
adequateclearancebelowsill(1/2"
required), removestormwindow
frameor createclearanceby addinga
woodstrip(at leastI 1/2" wide) along
entirewidth ofsill.Fastenwoodstrip
tosillwith at leastthreecountersunk
woodscrews(notsuppliedwith kit).
Thisprovidesa smoothsurfacefor
mountingair conditioner.
1/2"
Minimum
Mlinil/u2m _'_ i
R
Fmr_
Mobilehomewindow instollallon
Add wood strip(atleast1 1/2" wide)
alongentirewidthofwindow sill.
Thicknessof woodstripshouldmatch
heightof frontliponwindow frame.
Fastenwood stripto sillwith a
minimumofthreecountersunkwood
screws(notsuppliedwith kit).This
providesa smoothsurfacefor
mountingairconditioner.
Must be a minimum
of I/2' to cleor
bottom railon unit
_Mir,imum- I ! _'<_ Window
Frame
-_! o
o I
0 I
0
APPLYWINDOW
SASH GASKET
Raiseindoorsash.Measurewidth
of window sash,including portion
insidewindow track.Cutwindow
sashgasketto lengthand apply to
bottomof window sash.
15
iNSTALLOUTER
CASEiN WINDOW
Place outer case in window Lower
sash untiUit restsbehMd FrontfUange
of top raiJ, Bottomrail mustrest
behind window sill With a bvel
adjust unit to a 1/2 bubbb slope to Leve,
he rear for proper water drainage _
Wind...... h I ® ® ®
_JL, CurtalnassembJycut
_.,...._,, _; away forclarity
Expand bolh curtains to contact the
window _rame Install tv,,o31/32"
screws One ineach upper right and
bft corner of the curtains
Unstallthree 31/32" top mounting rail
screws
NOTE: To make screws easier to
drive, drill a pilot hob into sash
through clearance hob in curtains
Use lwo casementto window securance screws(1"}
to fix the case to windows sash
Install Uefl& right installation bracket and as shown
in fig Install bdt(2 1/2 _bng fUathead b@and U
Iocknut) to the installation bracket and adjust them _,._
to proper length ,th..... 4 (19/32 '_)...... to fix _
the bracket on thecase _ 19/32_'Io_gs e /_
Left _ f_. o,,,_,o_k,,__',w _1.-"
_/_ _ MARK
L°cknut\_\ l_ _j ,/ Right
INSTALL BASEPAN ANGLE
Unstalllwo 31/32" screws
through angle into window ledge
Repeat Foropposite side.
16
iNSTALL SEALGASKET
Cut window seaJ gasket to width of
window Stuff',,vk_dow seaJ strip
between outdoor window gJossand
top of indoor sash This wijj stop air
bakage which reduces efficiency
iMPORTANT: Stay dear of gJass Be
carefuJ not ta damage the function
of the window
iNSTALL
DRAIN TUBE
Modd:HWS08XCA, HWSI 0XCA,
HWS12XCA
Adjust the direction of the drain tube(drain eUbow)
to make it be in line with the hob
in the rear of unit; Unsertthe drain
_ube(drain dbow)into the hob and lwist 90 _'
RETURN
CHASSISTO
OUTERCASE
Find someone to help you
replace chassisin outer case
Unstdlbasepan dip Replacefront
_oand,and griHe(instoll h,voscrews
r HWS14XCA, HWS18VCA,
HWS20VCA) Where possible install
fvvo screws in r@ar of outercase,
removed in stepone
iMPORTANT: Becausewindow
sashhelps keep unit in window,
make certain window sash contacts
outer casebefore reinstalling
chassis
"i7
ngllsh
Wall installations: slideooutchassisonly
Note: Removethe ] or 2 shipping screwson the rear of the air conditioner
that hold thechassisto theouter shallcasing_Once removed,
these do not haveto be re-installed. Toensurethatyour air
conditioner is properly installed in thewall, it is
recommendedthat it be installed by a certified technician who is
familiar with throughthe wall installations.
1) Using wood, 1_'or more in thickness,build a wooden frame to fit the
casing/cabinet dimensionsof the unit which you havepurchased_
2) Measure theoutside width and the height of the frame to determine the
cutout dimensionsnecessaryfor the opening in thewall Thedepth of the
frame will depend on the depth of thewall The finished frame mustbe set
in the inside wall Theframe hasto be squared and levded. Rememberthe
frame has to be nailed securelyto the wall studs. (Seefig. # 11)
wdm
fig. # 11
3) Now to install, insert the casing into the wall opening_ (Removethe
chassisout first following steps1 - 6 in SJideooutchassissection)_
Make sure that thecabinet isat least 1/2" inch inside the room_Also the
side JouversshouJdnot be bJocked.This is to have proper air cirdation in
and around the compressor.(Seefig. # 12)
18
casing
level
fig. # 12
typlcaU casing
ou_ard tip
4) Thecasing shouJdbe tilted 1/4" outside so asto drain the excess
dehumidified water.
5) ProperRyinsulate any opening between the casing and the frame_
6) Usethe screw hobs on the sides of the unit which are for thewindow
mounting kit and the screw holes in the top mounting kit rail to attach
the casing to thewood frame, using the 5/8" screws.
7) With the help of another person lift and put the chassisof the
air conditioner in to the casing_
8) Screw the security screw into place and snap on the grille.
9) If the fiJterwas removed during this process,reinsert the filtec
]O)Screw the two side screwsthat hoJdthe grille to the casing_(not in
all models)
11) UseexternaJwall brackets if needed.
_ CAUTION: If, after completing thesesteps,the unit appears to be loose
or if you are unsurethe unit is properly installed,
contact a qualified installer.
19
1 / 1

Haier 10543027 Installation and User Manual

Category
Split-system air conditioners
Type
Installation and User Manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Ask the document

in other languages