ASSEMBLY INSTRUCTIONS
Remove all bolts (Cb) and metal
washers (Cc) from the center piece (Ca).
Place the tabletop (A) upside on a flat,
non-abrasive surface. Insert the legs (B)
into each plastic receivers on the tempered
glass tabletop with rim (A), working the legs
in until they fit in the receivers. Place the
center piece (Ca) between the legs (B) and
make sure the holes in the center piece (Ca)
line up with the holes in the legs. For each
hole, insert a bolt (Cb) through a metal
washer (Cc), through the leg and secure
into the center piece.
Securely tighten all bolts (Cb) by using Allen
wrench (Cd). Then turn the table over.
Your table is now ready for use. Enjoy!
1
2
3
3
CARE INSTRUCTIONS
Wash with a mild solution of soap and water; rinse thoroughly. Dry completely. Do not use bleach or solvents.
Cover furniture with outdoor furniture covers when not in use.
Made in CHINA
Distributed by Sears, Roebuck and Co., Hoffman Estates, IL 60179
See our extensive assortment of outdoor living products
on-line at www.sears.com and www.kmart.com
For questions or comments about product:
Call toll-free:
800-457-4652
Please refer to part numbers when reordering
Cb
Cc
Ca
A
B