VDO CD 2102 User manual

Brand: VDO

Model: CD 2102

Category: Car media receivers

Type: User manual

This manual is also suitable for

User manual

Mode d’emploi

Bedienungsanleitung

Gebruiksaanwijzing

Istruzioni d’uso

Instrucciones de manejo

Modo de emprego

Bruksanvisning

Betjeningsvejledning

Käyttöohje

www.vdodayton.com

3139 166 22164.2 03/02 gm

CD 2102

CR 2102

1 3 136 7 11 12 168 9 10

24 155 14

2102_2-3.p65 11/04/2001, 9:24 PM2

* Depending on version

SAM (Software Access Mode)

SAM

...

... ...

BEEP 1 BEEP 2BEEP OFF

... ...

MUTE HI MUTE LOTEL OFF

...

CLK OFFCLK ON

...

MANCLOCKRDSCLOCK

CLOCKSET

...

24HCLOCK12HCLOCK

...

BRIGHT 2BRIGHT 1

... ...

ANGLE 0 ANGLE +1ANGLE -1

... ...

AMERICA ASIAEUROPE

... ...

REG AUTO REG OFF

...

REG ON

RDS OFF

...

PRE SCANFM SCAN

... ...

5 SEC 10 SEC

...

SCANTIME

20 SEC

...

MWLW OFFMWLW ON

TAVOL 2TAVOL 1

...

LOGICOFFLOGICON

LED OFFLED ON

AF OFFAF ON

...

AUTOTUNEMANUTUNE

...

TAVOL 3 TAVOL 31

...............................

...

START 2START 1

...

START 3 START 31

...............................

...

MUTE 1MUTE 0

...

MUTE 2 MUTE 16

...............................

BEEP 5

...............................

01-2102.p65 15/04/2001, 3:49 PM4

* Depending on version

BEFORE YOU START....

Thank you for purchasing this VDO Dayton

product which has been designed and

manufactured to the highest standards and

subjected to rigorous testing.

Kindly familiarise yourself with the product by

reading this user manual. Keep this manual handy

in your car for future reference.

ENVIRONMENT

This booklet is printed on low-chlorine recyclable

paper.

IMPORTANT

This device has been designed and produced

according to applicable Safety Regulations.

Please read carefully the instruction manual and

use the device as intended.

CONTENTS PAGE

INSTALLATION ................................................ 5

PREPARATION ................................................ 5

MOUNTING ..................................................... 6

FRONT PANEL PRESENTATION ................... 7

SECURITY ....................................................... 7

AUDIO .............................................................. 8

RADIO .............................................................. 8

RADIO DATA SYSTEM (RDS) ON FM ........... 9

CASSETTE PLAYER ........................................ 9

CD PLAYER .................................................... 10

SPECIAL FUNCTIONS.................................. 10

SAM (Software Access Mode) ...................... 11

TROUBLE SHOOTING ................................. 13

Complies with 21 CFR 1040.10

INSTALLATION

If your car is equipped with ISO connectors,

simply insert them in the connectors of the car

radio. If not, you can use an adaptor cable (Refer

to the table on the separate installation manual).

Ensure all cables are installed so that they cannot

be damaged by sharp edges or moving parts.

PREPARATION

Voltage and polarity: The set must be connected

to a 12V car battery with negative terminal to

earth (car chassis). Installation in vehicles not

fulfilling these requirements could result in

malfunction, damage or fire.

Warning: To prevent short-circuiting,

disconnect the negative car battery terminal

until the set has been mounted and

connected (fig.1 See separate installation

card).

CONNECTOR A (fig.2)

Power supply connections

• Red wire A7 : Connect to a permanent 12V

supply. This is the main power supply. Ensure

this connection can handle a current of 10A.

• Yellow/red wire A4 : Connect to a switched

12V supply (switched on/off by car ignition).

• Brown wire A8: Connect to earth (car chassis).

• Electronic antenna/Motorised antenna :

Connect pin A5 to the power supply for an

electronic antenna or the control wire for the

replay of an antomatic motorised antenna. Use

the small connector supplied.

Do not use this connection for the supply

lead of the aerial motor!

• Pilot light :

When the car headlights are switched on, the

backlight to the power key remains illuminated

(even when the radio is switched off).

Connect pin A6 to the dashboard illumination

wiring of the car. Use the small connector

provided.

01-2102.p65 15/04/2001, 3:49 PM5

* Depending on version

CONNECTOR B (fig.3)

Loudspeakers (use 4 ohm loudspeakers

only)

• Do not connect any of the loudspeaker leads

to earth or directly to a booster/amplifier without

high level input or via an external fader! You

can connect the loudspeaker leads directly to

an amplifier with high level input.

• Connecting 4 loudspeakers:

Front Rear

Left+ Green [B5] White [B7]

Left- Green/black [B6] White/black [B8]

Right+ Grey [B3] Blue [B1]

Right- Grey/black [B4] Blue/black [B2]

CONNECTOR C

Green connector C2 (fig. 5)

Steering wheel remote control

You can connect certain car steering wheel

mounted remote control to this set via an interface.

Please consult your dealer for the correct

interface.

Pink wire (Telephone mute)

• If your car telephone or the car kit of your mobile

phone provides a mute signal, it can be used to

automatically interrupt the set's sound output.

– Connect the telephone mute wire to the Pink

lead wire.

– See 'SAM' (page 11); select

option 'TEL' and set 'MUTE LO' or 'MUTE HI'

(according to phone type) to automatically

interrupt the set's sound output when using

your car phone.

MOUNTING

METAL SLEEVE (fig.9)

• Install the metal sleeve (dimension 182x53 mm) in

the dashboard. For optimal performance of the CD

player*, the metal sleeve should be positioned

horizontally (between -10

and +30

• Fix metal sleeve into place by pressing the metal

tags outwards using a screwdriver.

CONNECTING THE RADIO(fig.8)

• Ensure the battery is disconnected.

• Insert aerial plug E into aerial socket (good

reception is only possible with a good aerial).

Fix antenna adaptor if needed. Use hook (J)

on back of set to secure fixing.

• Insert power supply connector A into socket A’.

• Insert loudspeaker connector B into socket B’.

• (optional) Remove the protective cover from

socket C’.

C connectors belong to accessories sold

separately. For more information, see your

dealer.

• (optional) Insert the green connector C2 into

socket C2’.

The green connector slides between the yellow

connector C1 and the blue connector C3.

You need at least one of these connections to

keep C2 in place.

MOUNTING RADIO

This radio can be properly installed either from

conventional Front Mounting or Rear Mounting.

FRONT MOUNTING

• Slide the radio into the metal sleeve until the

springs at either side of the radio snap into the

openings of the sleeve (fig.10).

• Finally reconnect the negative car battery

terminal (fig.11).

REMOVING RADIO (using the two U- brackets

supplied)

• Remove the trimplate around the front panel.

• Insert both U-brackets into the holes on the

front of the set until they lock. Pull out the radio

(fig.12).

REAR MOUNTING (fig.13)

• Remove the trimplate around the front panel

and the side springs.

• Select a position where the screw holes of the

mounting bracket and the screw holes of the

radio become aligned and tighten the screws

at 2 places on each side.

• Only use M5 screws that are not longer than

6mm.

REPLACING FUSE (fig. 8)

• Replace with a 10A blade-type fuse. The new

fuse must be of exactly this value and type

otherwise the set will not be adequately

protected. Ignoring this procedure may lead to

damage to the set, which will invalidate the

guarantee.

INTERFERENCE SUPPRESSION

• Most modern cars have sufficient interference

suppression. If you experience interference

generated by the car, consult your garage.

01-2102.p65 15/04/2001, 3:49 PM6

* Depending on version

FRONT PANEL PRESENTATION

For illustration, see page 3, figure A.

1 ............. Short press: Switch on; mute/

demute (when set is on)

Long press: Switch off

2 .................. Flip down the detachable

panel

3 ........... Desired sound source

................ Volume up/down

.......... Audio mode

........... Audio mode

5 .......... Sound mode

6 .................. Traffic announcement

7 ............. Waveband

8 ................ Short press: Autostore

...... Long press: CD random

playback on/off

9 ................ Short press: RDS

alphabetical station

selection

.......... Long press: RDS alphabetical

station store

10 .............. Short press: Tuner's Preset

(frequency) scan/CD's track

scan

........ Long press: CD repeat track

on/off

11 ............. Local / Distant mode

12 ........... Display mode

13 ............... Search up/down (tuner);

Next/previous track (CD*);

MSS (Cassette*)

14 / ................. Preset up/down (tuner);

Reverse (Cassette*)

15 ................ Short press: Software

Access Mode

16 .............. Short press: Bass Boost

............... Long press: Metal / Chrome

cassette playback

(Cassette*)

SECURITY

For theft protection this set is provided with the

following security features :

DETACHABLE FRONT

Take the detachable front with you when leaving

the car. Keep it in its protective box.

Always replace the detachable front before

starting to drive.

Removing the front (See page 3, figure B)

• Press to flip down the detachable front.

• Push to the left side first and then pull to remove

the detachable front.

Replacing the front (See page 3, figure C)

• Insert the detachable front starting with the right-

hand side of the set.

• Push the detachable front until it clicks into

position.

LOCKING THE DETACHABLE FRONT (See

page 3, figure F)

The detachable front can be locked by a D2 x10

screw.

• Remove the trimplate

• Flip down the detachable front.

• Insert a D2 x10 screw (inside the accessories

bag) in position

SECURITY LIGHT

• The LED flashes when the detachable front is

removed when the ignition is off. You can switch

off the flashing warning light. See 'SAM' (page

11), option 'LED' .

SECURITY WARNING STICKERS

• Stick the supplied 'Security' warning stickers

on your car windows.

IDENTIFICATION NUMBER

This set has a unique identification number (stated

on the 'Security card'). This card is required as a

proof of ownership when the set is stolen, when

the detachable front is lost or when requesting

service.

• Remove the 'Security card' before installing the

set. Do not keep the 'Security Card' in your car.

01-2102.p65 15/04/2001, 3:49 PM7

* Depending on version

AUDIO

ON/OFF

• Press to switch on the set. Press

for more than 2 seconds to switch off the set.

VOLUME

Please make sure you can still hear the traffic

(horns, sirens........)

• Press

to adjust the volume.

Note : You can adjust the start-up volume. When

the start-up volume is set to maximum level, it

may be extremly loud when you switch on the

set. See 'SAM' (page 11), option 'START'.

MUTE

• Press to mute/demute the sound when

the set is switched on.

Note : You can adjust the mute level.The volume

may be louder during mute when the mute level

is higher (e.g. 16) than the current volume (e.g.

5). See 'SAM' (page 11), option 'MUTE'.

AUDIO MODE SETTING

• Pres to select desired audio mode.

• Press or to adjust the selected

audio mode.

– BASS : Bass (-7...+7)

– TRE : Treble (-7...+7)

– BAL : Balance (-7...+7)

– FAD : Fader (-7...+7)

– Sound Style (BASS-TRE, ORIGINAL, JAZZ,

VOCAL, POP, CLASSIC, ROCK)

After 5 seconds the display goes back to the

last mode of operation.

Adjustment of Bass and Treble setting is only

possible when BASS-TRE is selected as the

sound style.

BASS BOOST SYSTEMS

• Press to select desired bass boost (not

applicable when ORIGINAL is selected as the

sound style).

SOURCE

• Press to select the desired source :

- TUNER

- TAPE*/CD*

RADIO

WAVEBAND

• Press to select the desired waveband :

Note : You can suppress MW/LW (AM) bands

if not required. See 'SAM' (page 11), Option

'MW/LW (AM)'.

AUTOMATIC SEARCH

Use search tuning to automatically search for a

station.

• Press

to tune to a station of a lower

frequency or to a higher frequency.

– You will receive a station after a short time. To

search for another station, press the key again.

Search sensitivity (only FM)

• Press to switch between LOCAL and

DISTANT mode. Select 'LOCAL' if you wish to

search only for strong stations during search

tuning.

Frequency scan / Preset scan (see 'SAM'

page 11 option 'SCAN')

Frequency scan allows you to listen to each

located station on the current waveband while

Preset scan allows you to listen to each stored

preset station on the current waveband.

• Press to activate/deactivate Frequency

scan or Preset scan.

• Press or to start the scanning.

Note : You can select how many seconds each

station is scanned, see 'SAM' (page 11); option

'SCANTIME'.

Manual tuning (if you know the frequency of

the required station)

• To switch to manual tuning :

See 'SAM' (page 11), option 'TUNING'; set

value to 'MANUTUNE'. The radio remains in

manual tuning mode until you change this setting

back to 'AUTOTUNE'.

• Press to tune to a station of a lower

frequency or to a higher frequency.

PRESELECTED STATIONS

Manually storing stations in a preset

You can manually store 20 FM stations, 10 MW

stations and 10 LW stations.

• Tune in to the desired station.

• Press for more than 2 seconds to enter preset

store mode.

• Press to select the preset number you wish

to use.

Display shows alternately preset station

number and current stored station.

• Press for more than 2 seconds to store the

station on the selected preset number.

When storing an FM station, the relevant

RDS information and AF mode (on/off) are

also stored on the preset.

01-2102.p65 15/04/2001, 3:49 PM8

* Depending on version

Recalling a preset

• Press

or to select the desired preset.

Automatically storing stations (AUTO-

STORE)

This function automatically stores 10 strongest

FM stations in the FMAST band or 10 strongest

MW(AM) stations in the MW(AM)AST band. When

you use Auto Store, the new stations replace any

stations previously stored in the FMAST band or

the MW(AM)AST band.

• Press to activate autostore.

– The set gives a beep and then mutes.

– When it has finished, you hear a beep followed

by the station stored on preset 1.

– Sometimes it may not be possible to find 10

stations.

Switching the display mode (RDS station)

• Press once or repeatedly to switch the

display between station name, Band and

preset number, frequency followed by PTY and

sound style.

Switching the display mode (non RDS

station)

• Press once or repeatedly to switch the

display between frequency, Band and preset

number and sound style.

RADIO DATA SYSTEM (RDS) ON FM

Many FM stations broadcast RDS information.

This set uses the RDS information to offer you

many advantages including :

DISPLAY OF STATION NAME

The set displays the name of the station instead

of its frequency.

AUTOMATIC RETUNING

The set remains tuned to the current station by

continually searching for the best possible

alternative frequency for reception.

Note : You can switch off AF when not required,

see 'SAM' (page 11); option 'AF'.

TRAFFIC ANNOUNCEMENTS (TA)

You can activate the TA modes to give priority so

as to hear announcements related to these

subjects, (even if you play a cassette/CD* or

mute the set).

Activate/deactivate TA

• Press to select an FM waveband :

• Press to activate/deactivate TA.

If you activate TA

mode :

• You will hear the Traffic Announcements when

broadcast.

• If the tuned station does not enable the

reception of Traffic Announcements, the display

shows ‘NO TA’. The radio automatically

searches an appropriate station.

Interrupting Traffic Announcement mode

If you do not wish to continue listening to a

particular Traffic Announcement , you can interrupt

it without switching off the mode.

• Press

to interrupt TA:

– The set will return to the previous operating

mode.

RDS MEMO STORE

It is possible to store up to 50 stations in

alphabetical order in a separate FM memory.

Loading RDS memory

• Press to select FMPRE waveband.

Note : You will hear an error beep if you activate

RDS MEMO in FMAST band.

• Press for more than 2 seconds to

activate RDS MEMO:

- The set mutes. When the search is completed

the set beeps again and you hear the first

alphabetically stored station.

Scrolling through the RDS memory

• Press to select A-Z band

• Press or to select the desired station in

alphabetical order.

- If you hear a beep and cannot select station

according to alphabetical order, see 'Loading

RDS memory' to load RDS memory in the

memory first.

Note:

You can switch off RDS features if not required.

• See 'SAM' (page 11), option 'REG/RDS'.

- All above RDS related features e.g. A-Z,

MEMO, TA, etc... will be deactivated when option

'RDS' is set to 'OFF'.

CASSETTE PLAYER *

PLAYBACK (See page 3, figure D)

• Press to flip down the front.

• Slide the cassette, with the open side to the

right into the cassette opening.

• Close the front.

Playback starts.

• If a cassette is already inserted, press

to select cassette as SOURCE :

Playback starts.

01-2102.p65 15/04/2001, 3:49 PM9

* Depending on version

CHANGE SIDE

• Press or to change the side :

– At the end of the cassette, playback

automatically continues with the other side.

Metal-Chrome cassette

• Press for more than 2 seconds to

activate/deactivate Metal-Chrome cassette

playback.

FAST REWIND / FAST FORWARD

• Press for more than 2 seconds to activate/

deactivate fast rewind:

• Press for more than 2 seconds to activate/

deactivate fast forward:

– You hear the radio during this operation. If you

continue fast winding until the end of the

cassette, playback restarts automatically.

PREVIOUS / NEXT TRACK (MUSIC SEARCH

SYSTEM)

Select how many tracks you want to miss out

from the current playing position.

• Press to select previous tracks.

• Press to select next tracks :

– The sound is muted until the desired track is

reached. The set can only recognise tracks

when there are silent intervals of at least 3

seconds.

CASSETTE EJECT (See page 3, figure D)

• Flip down the front and press EJECT to eject

the cassette.

SWITCHING THE DISPLAY MODE

• Press once or repeatedly to switch the

display between play direction, background

station name or frequency and sound style.

CARE OF CASSETTES

– Only use good quality cassettes of 60 or 90

minutes playtime.

– Never expose cassettes to heat or direct

sunlight.

– Clean the tape head (once or twice a month)

using a wet-tape cleaning cassette.

CD PLAYER*

CD PLAYBACK (See page 3, figure E)

This CD player is suitable for 12cm disc, do not

use irregular shaped CD.

• Press to flip down the front.

• Slide the disc into the slot with the label facing

upwards.

• Close the front. Playback starts.

• If a disc is already inserted :

Press to select CD as the source.

Playback starts.

PREVIOUS/ NEXT TRACK

• Press or to select the desired track.

– Playback resumes with the chosen track.

FAST BACKWARD / FORWARD

• Press and hold or to quickly move

backward or forward through the disc .

– Normal playback resumes when you release

the key.

SCAN TRACK

The scan function enables you to listen to the

first few seconds of each track.

• Press to activate/deactivate Scan track.

• Press or to start the scanning.

Note : You can select how many seconds each

track is scanned, see 'SAM' (page 11); option

'SCANTIME'.

RANDOM TRACK PLAYBACK

• Press for more than 2 seconds to

activate/deactivate Random track playback.

REPEAT TRACK

To continually repeat the current track.

• Press for more than 2 seconds to

activate/deactivate Repeat current track.

DISC EJECT (See page 3, figure E)

• Flip down the front and press EJECT to remove

the CD from the player.

SWITCHING THE DISPLAY MODE

• Press once or repeatedly to switch the

display between track number/elapsed play

time, total track time, background station name

or frequency and sound style.

SPECIAL FUNCTIONS

Setting the clock (manually)

• See 'SAM' (page 11), option 'CLOCKSET' .

Note :

You can select 12 hour or 24 hour clock display.

• See 'SAM' (page 11), option 'CLOCK' .

RDS clock (auto update)

You can select an automatic update of the clock

via the RDS radio signal.

• See 'SAM' (page 11), option 'CLOCK' .

– The transmitted time via RDS can be incorrect.

01-2102.p65 15/04/2001, 3:49 PM10

* Depending on version

SAM (Software Access Mode)

It is possible to modify many of the set's default settings according to your preferences via 'SAM'.

• Press to enter the 'SAM' menu.

• Press or to select one of the options in the menu you want to modify.

• Press or to select the value/setting.

• Press to exit the 'SAM' menu.

The set automatically leaves this mode after 30 seconds if no key presses are made.

Option Value/Setting Usage

( or )( or )

TAVOL [1 to 31] Select volume level of Traffic Announcement, News bulletins

and Alarm messages.

START [1 to 31] – Select the start-up volume when power on.

– After modification of the start-up volume, if the set is

switched off and on within 10 minutes, the start-up volume

reverts to the last used volume setting.

– After modification of the start-up volume, if the set is

switched off and on after more than 10 minutes later, the

start-up volume is the level defined in 'SAM'.

MUTE [0 to 16] Select the mute level.

BEEP [0FF, 1, 2, 3, 4, 5] Select volume level of confirmation beeps.

TEL [TEL OFF, MUTE HI, – Select 'TEL OFF' if no car phone is connected to

MUTE LO] the set.

– Select 'MUTE LO' or 'MUTE HI' (according to phone type)

to automatically interrupt the set's sound output when

using your car phone.

CLK [ON, OFF] Select 'ON' to activate CLOCK feature.

CLOCK [RDSCLOCK, Select 'RDSCLOCK' to activate RDS clock or "MANCLOCK'

MANCLOCK] to set clock manually.

[CLOCKSET] If 'MANCLOCK' selected; set the time. to adjust the hour

digit, to adjust the minute digit.

[12HCLOCK, Select desired clock format.

24HCLOCK]

BRIGHT [1, 2] Select the level of display and button brightness (only when

car headlights are switched on and connected to pin A6,

see 'INSTALLATION' (page 5)).

ANGLE [-1, 0, +1] Select the viewing angle of the set's display.

LOGIC [ON, OFF] Select 'ON' to limit the use of the set to one hour when the

car ignition is switched off. Select 'OFF' to prevent the set

from turning on when the car ignition is switched off. (Only

when A7 and A4 are connected correctly, see page 5 for

correct connection of power supply).

01-2102.p65 15/04/2001, 3:49 PM11

* Depending on version

Option Value/Setting Usage

( or )( or )

LED [ON, OFF] Select 'OFF' to switch off the flashing warning light when the

detachable panel is removed with ignition off.

RADIO [EUROPE, Select the tuner according to European, American

AMERICA, ASIA] or Asia standards.

AF [ON, OFF] Select 'OFF' to prevent the radio from returning to Alternative

Frequencies.

TUNING [MANUTUNE, Select auto or manual tuning for tuner.

AUTOTUNE]

REG/RDS [REG ON, REG AUTO, – Select 'REG ON' to maintain regional programme,

REG OFF, RDS OFF] – Select 'REG AUTO' to switch programme when the next

signal is stronger,

– Select 'REG OFF' to directly switch to the programme of

the next region.

– Select 'RDS OFF' to switch off RDS feature.

SCAN [PRE SCAN, – Select 'PRE SCAN' to enable Preset SCAN or

FM(MW)(LW) SCAN] FM (MW) (LW) scan to enable Frequency scan.

SCANTIME [5 SEC, 10 SEC, Select the scan time (station or track).

20 SEC]

MWLW (AM) [ON, OFF] Select 'OFF' to suppress MW/LW (AM) when not required.

01-2102.p65 15/04/2001, 3:49 PM12

* Depending on version

TROUBLE SHOOTING

There may be times when you suspect that your

car radio is not functioning as you would expect it

to. Before calling for service, please read the

operating / installation instructions and review the

following checklists. You may find that an apparent

malfunction can easily be rectified.

If you still have to send your set for service, always

send the complete set (with detachable front). Do

not try to open the set to service it yourself.

Audio

Set does not function. No Display.

• Check fuse (set and car) and connections.

Set functions but no sound?

• Adjust the volume of the set.

• Check fader and balance settings.

• Check aerial and its connection.

• If car phone is connected, see 'SAM' (page

11), check option 'TEL.

The sound from the speakers is reduced

automatically.

• A built-in safety circuit prevents the temperature

in the set from exceeding a certain level.

• Wait for the temperature to decrease before

increasing the volume.

Radio

Cannot tune to desired station?

• Check that the aerial is fully extended and

properly connected.

• Check that the negative terminal (brown lead)

is connected to earth (car chassis).

• Desired station is too weak, try Manual Tuning.

Poor tuner reception?

• In some cars (e.g. VW and Seat) there is an

active aerial on the roof that needs a 12 Volt

supply. Please ask your dealer to check

whether a 12 volt is supplied to the antenna.

Display shows frequency (not station name).

• Set is tuned to non-RDS station.

Radio mutes momentarily while display shows

'SEARCH' and station name/frequency

alternately.

• Set is checking a list of Alternative Frequencies

(AF) for the tuned radio station as reception is

weak. In case no AF is transmitted for the tuned

station, switch off AF via the 'SAM'.

Display shows 'NO TA', and set beeps at intervals.

• The tuned station becomes too weak to enable

the reception of Traffic Announcements. Use

search tuning to find another station.

• If the TA mode is switched on, search tuning

only selects stations which enable the reception

of Traffic Announcements.

Cassette

Display shows 'TAPE ERR'.

• Check cassette for faults

Display shows 'NO TAPE'

• Check that the cassette has been inserted into

the player.

Cassette playback lacks high-notes or loss of

one channel.

• Clean cassette player tape head.

Tape Slack

• Check and make sure any slack in the tape is

taken up before inserting the tape into the unit.

A loose tape can get caught in the mechanism

and cause damage to the unit and tape itself.

Tighten the tape by using a pencil or a similar

instrument into the spindle hole and turn until all

slack has been taken up.

Display shows 'CD ERR' or 'ERROR' and set

beeps.

• Check that the discs have been inserted in the

correct way and that you have not inserted a

damaged or dirty disc.

Distorted sound during playback.

• Player unable to read disc. CD damaged or

dirty.

CD player does not function?

• If the weather is cold, there may be some

condensation on the laser. Use the set in radio

mode for about 5 minutes to allow the moisture

to evaporate.

Display shows 'NO CD'.

• Check that the CD mechanism has been loaded

with disc.

01-2102.p65 15/04/2001, 3:49 PM13

User manual

Mode d’emploi

Bedienungsanleitung

Gebruiksaanwijzing

Istruzioni d’uso

Instrucciones de manejo

Modo de emprego

Bruksanvisning

Betjeningsvejledning

Käyttöohje

www.vdodayton.com

3139 166 22164.2 03/02 gm

CD 2102

CR 2102

VDO CD 2102 User manual

Brand: VDO

Model: CD 2102

Category: Car media receivers

Type: User manual

This manual is also suitable for

Download PDF

report

VDO CD 2102 User manual

This manual is also suitable for

VDO CD 2102 User manual

Related papers

Other documents