Rain Harvesting TASS24 Installation guide

Type
Installation guide

Rain Harvesting TASS24 is an innovative device designed to fit under your tank screen, effectively blocking sunlight and preventing algae growth in your water tank. Its unique fins distribute and calm the water flow, minimizing sediment resuspension and ensuring the water stays clean and clear. Installation is simple and can be completed in a few steps, requiring only basic tools and materials like a screwdriver or drill and screws. The TASS24 is suitable for tanks of various sizes, with a 300mm diameter and a range of compatible tank screens.

Rain Harvesting TASS24 is an innovative device designed to fit under your tank screen, effectively blocking sunlight and preventing algae growth in your water tank. Its unique fins distribute and calm the water flow, minimizing sediment resuspension and ensuring the water stays clean and clear. Installation is simple and can be completed in a few steps, requiring only basic tools and materials like a screwdriver or drill and screws. The TASS24 is suitable for tanks of various sizes, with a 300mm diameter and a range of compatible tank screens.

Code
Size
Country
TASS24
TASS25
TASS26
300mm
400mm
500mm
Australia
TASS24
TASS25
TASS26
12"
16"
20"
USA
Solar Shields
PRODUCT DETAILS
Designed to fit under your tank screen, our Solar
Shield’s patented design blocks sunlight to prevent
algae growth.
Its cleverly designed fins evenly distribute and calm
the water flow into your tank, minimizing sediment
resuspension and ensuring that water stays at its
best.
Installation and Specification Guide
rainharvesting.com
WHAT'S IN THE BOX? TOOLS/MATERIALS YOU MAY REQUIRE
INSTALLATION
Solar Shield Screwdriver or drill
Screws
Installation
1 - If you already have a tank screen installed, you must remove it prior to installing the Solar Shield.
2 - Place the Solar Shield in the tank inlet hole so that the arms rest on the top surface of the tank and the
Solar Shield is suspended in the inlet. Rotate the Solar Shield to align the screw points with the existing
screw holes in the tank, if there are any.
3 - Place the tank screen over the Solar Shield, making sure to align the screw points with the Solar Shield
arm lugs.
4 - The tank screen should drop into place so that the outer rim is flush with the surface of the tank.
5 - Secure the tank screen and Solar Shield in place using screws that are suitable for the tank material.
The Solar Shield will accept screws up to 8 gauge in size.
rainharvesting.com
Country
Code
A
B
C
D
E
Suits Tank
Screen
Australia
TASS24
321
263
305
122
112
300
TASS25
408
348
394
122
112
400
TASS26
499
439
492
122
112
500
USA
TASS24
12.63"
10.35"
12"
4.80"
4.41"
12"
TASS25
16"
13.70"
15.51"
4.80"
4.41"
16"
TASS26
19.64"
17.28"
19.37"
4.80"
4.41"
20"
Product Specifications
Solar Shields
rainharvesting.com
All dimensions are in mm unless otherwise stated.
A common misconception about collecting rainwater is that all you need is a
roof, a tank and some rain. This ‘tanking’ approach cannot always be relied on to
deliver the volume or quality of water that you require. That is where we can
help.
With some thought, your rain harvesting system can provide you with cleaner
water and lots of it. Whether you’re completely reliant on tank water or wanting
to keep the garden green, our simple steps will help you achieve your goal.
The Rain Harvesting approach to rainwater collection involves using tested and
proven products to make quality rainwater available for use in and around your
property. You don’t need much to get started and you will be surprised how
easy it is to get the most out of your rainwater system.
How can we help you?
DISCLAIMER This product specification is not a complete guide to product usage. Further information is available from Rain Harvesting Pty Ltd and from the installation and Operating
instructions. This specification sheet must be read in conjunction with the installation and Operating Instructions and all applicable statutory requirement. Product specifications may
change without notice. © Rain Harvesting Pty Ltd
rainharvesting.com
Maintenance
When properly installed, your Solar Shield should be maintenance-free. However, we recommend to
occasionally to inspect and maintain the Tank Screen above it.
Alternatively, you may wish to consider installing a Maelstrom Filter rather than using a Solar Shield and Tank
Screen.
COMPLIANCE
AS/NZS 4020:2005 - Testing of products for use in contact with drinking water
For more information or to find out
how we can help, just give us a call on
+61 7 3248 9600
Or visit our website at
rainharvesting.com
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5

Rain Harvesting TASS24 Installation guide

Type
Installation guide

Rain Harvesting TASS24 is an innovative device designed to fit under your tank screen, effectively blocking sunlight and preventing algae growth in your water tank. Its unique fins distribute and calm the water flow, minimizing sediment resuspension and ensuring the water stays clean and clear. Installation is simple and can be completed in a few steps, requiring only basic tools and materials like a screwdriver or drill and screws. The TASS24 is suitable for tanks of various sizes, with a 300mm diameter and a range of compatible tank screens.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI