2. Pestill
  3. PTPESTACREPA
PTPESTACREPA

Pestill PTPESTACREPA User guide

  • Hello! I'm a chat assistant, and I've reviewed the provided user guide for the Pestill multifunction electrosonic pest repeller. This guide details the device's four operating modes, including electromagnetic, air purification, and ultrasonic functions, each designed to target different pests and improve air quality. I am ready to answer your questions about the device and its use.
  • What are the different modes of operation?
    How do I select a mode?
    What does the 'All' mode do?
MULTIFUNCTION ELECTROSONIC
PEST REPELLER
PTPESTACREPA
Ensure to read all instructions and warnings in this user guide prior to first use. Retain this
user guide for future reference.
• Avoid using the repeller in extremely humid environments.
• Unplug the repeller if it will not be used for an extended period.
• This repeller is not intended for use by persons (including children) with reduced
physical, sensory, or mental capabilities or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the repeller in a
safe way by the person responsible for their safety, and understand the hazards
involved.
SAFETY & WARNINGS
OVERVIEW
Ultrasonic emitter
Ultrasonic emitter
Ultrasonic emitter
Light
Green LED
Electromagnetic
emitter
Red LED
Yellow LED
Powering on/off
• Plug the power cord into a socket then turn on the socket. The three LEDs and light
will illuminate whilst the repeller enters setup before being ready for use.
• To turn off the repeller, turn off the socket then unplug the power cord.
Modes
This repeller features four modes:
• Electromagnetic – Emits electromagnetic waves in 25 second bursts over 35 second
intervals. These waves primarily deter cockroaches and other insects.
• Air purification – Emits negatively charged ions that attach to dust and pollen in the
air. This causes them to fall onto the floor and purify the air.
• Ultrasonic – Emits ultrasonic waves with frequencies ranging from 25–60KHz. These
waves primarily deter rodents.
• All – Activates all modes to run simultaneously.
Selecting the mode
• Press the mode button and the repeller will operate in electromagnetic mode. The
red LED will be illuminated.
• Press the mode button again to activate the air purification mode. The yellow LED
will be illuminated.
• Press the mode button a third time to activate the ultrasonic mode. The green LED
will be illuminated.
• Press the mode button a fourth time to activate all modes to run simultaneously. All
LEDs will be illuminated in this mode.
OPERATION
Notes:
• Ensure the socket is clear of any surrounding objects.
• It is recommended to operate the repeller away from objects and furniture as
this decreases the effectiveness of the frequency waves.
Note:
The longer the repeller is used in a certain location, the better the performance.
Need more information?
We hope that this user guide has given you
the assistance needed for a simple set-up.
For the most up-to-date guide for your product,
as well as any additional assistance you may require,
head online to help.kogan.com
/