uxcell A18112500UX0186 User manual

2kg Weighing Electronic Balance Wired Load Cell

Description:

2kg range silver tone aluminum wired weighing load cell, high accuracy, simple structure, easy installat

ion. Widely used for electronic scales and balance material scales, jewelry scales and control system.

Specification:

- Product Name: Weighing Load Cell

- Rated Load: 2kg

- Output Impedance: 1000+/-5 Ohm

- Input Impedance: 1066+/-20 Ohm

- Error: +/-0.05 F.S.

- Sensitivity(mV/V): 1+/-0.15

- Wire Connection: Red (EXC+), Black (EXC-), Green (SEN+), White (SEN-)

- Hole Thread: M4

- Material: Aluminum alloy

- Wire Length: 140mm

- Load Cell Size: 60 x 13mm

Note:

1- Special attention must not directly press the white plastic cover part, to avoid damaging the

sensor.

2- If a load cell is used, the mounting plane of the base should be adjusted with a level until level.

3- Determine the rated load of the sensor used according to the range selection of the load cell in its

description.

Made in China