①. Micro USB Input Port
②. Type-C Input/Output Port
③. Digital Display
④. USB Output
⑤. ON/OFF Button
⑥. Wireless Charging Panel
6. SPECIFICATION INFO
Dimension
Product Size
Product Weight
5.83*2.71*0.65 in
0.46 lb
Power
Battery Capacity
Max. Output Wattage
Wireless Output
Charging Merhood
10000mAh/37Wh
20W
15W/10W/7.5W/5W
Micro/Type-C
Micro Input 5V/3A ; 9V/2A ;
12V/1.5A
Type-C Input 5V/3A ; 9V/2A ;
12V/1.5A
USB Output
Type-C Output 9V/2.22A ;
12V/1.67A(max)
5V/3A ; 9V/2A ;
12V/1.5A
Features
LED Digital Display
On/O Switch
Overload Protection
YES
YES
YES
Auto Shut-O
Wireless Charging
YES
YES
General
Brand
Product Name
SKU
IDEAPLAY
IDEAPLAY 10000mAh 37Wh Power Bank
IP-WPB824AJKW1
Model Number
Additional Accessories
Included
WPB-100
Type-C Cable*1
2 in1 USB Cable*1
3
3. PRODUCT OVERVIEW
4. SAFETY
(1) EMC Directive 2014/30/EU (including amendments). (2) Low Voltage Directive 2014/35/EU. (3) Red Directive 2014/53/EU (If Product has RF function).
(1) The device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.
Declaration of Conformity for EU Countries
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
DO NOT throw this electronic device into the trash. When discarding, to minimize pollution and ensure utmost protection of the global environment, please recycle it.
WEEE Disposal Instructions:
IDeaPLAY WPB-100 IDeaPLAY WPB-100 IDeaPLAY WPB-100
4
IDeaPLAY WPB-100 IDeaPLAY WPB-100 IDeaPLAY WPB-100
5
IDeaPLAY WPB-100 IDeaPLAY WPB-100 IDeaPLAY WPB-100
①
②
③
④
⑤
⑥
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy. If it is not installed
and used in accordance with the instructions it may cause harmful interference to radio
communications. However, there is no guarantee that interference will occur in a particular
installation.
If this equipment does cause harmful interference to radio or television reception the user
can try to correct the interference by one or more of the following measures:
FCC Disclaimer
Reorientate or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment to an outlet on a circuit dierent from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for assistance.
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.
5. FCC CAUTION
Any change or modications to this device not expressly approved by the manufacturer could void your authority to operate this equipment.
Output Ports
1 USB Output Port
1 Type-C Output Port