EVOCA Pilot Receiver User guide

Brand: EVOCA

Model: Pilot Receiver

Type: User guide

> START HERE

We’ll let you know when it’s time to refer to your antenna installation guide.

This is one of those rare instances when you really should use the instructions. It’s not that

it’s complicated, it’s just that the process will go much smoother and you’ll end up with

the best reception and all the channels you expected. Don’t wait until 30 seconds before

game time either!

Ready? Okay, let’s get going.

> Here’s what you’ll need:

•An available power outlet for Pilot.

•If your antenna is powered, a second outlet will be required.

•An available HDMI input on your TV (take note of the HDMI input number).

•The remote that came with your TV.

•An antenna with a coax cable (either your own or one you ordered).

•A good initial location to place your antenna.

> WHAT’S IN THE BOX

HDMI cable Power supply HDTV antenna

with cable

(optional)

Still have questions?

Scan the QR Code or visit

Evoca.tv/SetUp or call

1-877-EVOCATV

(1-877-386-2288)

Monday - Friday between

6 AM and 8 PM EST.

Use your camera phone to

scan the QR code >

Important Product Information

FCC Compliance Information • Model: Evoca Pilot • This device must be installed at least 20cm (~8 inches) from typical person locations per FCC RF exposure guidelines. Do not make any modiﬁcations to this device, doing so may void your authority to operate it.

NOTE: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, you are encouraged to try to correct the

interference by one or more of the following measures: 1) Reorient or relocate the receiving antenna. 2) Increase the separation between the device and receiver. 3) Connect the device into an outlet on a circuit different from that to which the receiver is connected. 4) Consult the

dealer or an experienced radio/TV technician for help. If using an outdoor antenna follow NEC guidelines included with the antenna for grounding of the coaxial cable.

Responsible Party US Contact Information: Evoca, 9605 S. Eisenman Road, Boise, Idaho 83716. www.evoca.tv. Warranty information can be found at evoca.tv/warranty. All other legal and safety information can be found at evoca.tv.

Device contains FCC ID: ACQ-VIP7802ATSC.

TV BRAND CODES

AUDIOVOX 576, 720, 800, 807, 808

BROKSONIC 338, 450, 702, 707, 738, 742

COBY 154, 232, 769, 770, 771, 788, 817

CRAIG 129, 242, 576, 606, 754

DAEWOO 813, 99, 698, 711, 715, 725, 754, 762

DYNEX 314, 1, 128, 179, 247, 335, 336, 337, 338, 339, 340, 341, 625

ELEMENT 294, 154, 239, 129, 513, 586, 513

EMERSON 563, 154, 682, 686, 690, 715, 335, 376, 576, 672, 689, 702, 709, 745, 814

FUJITSU 745, 805

FUNAI 335, 340, 563, 682, 686, 690, 709, 745, 576, 754

GE 396, 122, 154, 668, 705, 755, 816

GOLDSTAR 99, 154, 682, 709

HAIER 297, 589, 154, 157, 175, 513, 179, 628

HISENSE 154, 296, 386, 513, 157, 635

HITACHI 250, 167, 346, 513, 682, 152, 289, 709, 717

INSIGNIA 314, 340, 339, 337, 294, 341, 513, 680, 128, 690, 782, 338, 179, 1, 154,

335, 336, 625

JC PENNEY 99, 157, 360, 396, 668, 735, 755

JVC 245, 152, 157, 282, 167, 513, 692

LG 154, 682, 717, 99, 396, 709

MAGNAVOX 368, 1, 150, 309, 335, 340, 513, 686, 690, 695, 811

MITSUBISHI 99, 750, 717, 745

NEC 602, 99, 153, 264, 374, 472

PANASONIC 12, 370, 651, 694, 360, 775

PHILIPS 368, 1, 513, 690, 686, 717, 740

PHILIPS-MAGNAVOX 1, 792, 150, 695

> REMOTE CODES

Pilot receiver

(set-top box)

Remote

Control

Guide VOD

Info

Input

TV BRAND CODES

PIONEER 289, 685, 153, 495, 724

POLAROID 189, 464, 277, 1, 122, 129, 179, 360, 642, 763, 810

PROSCAN 282, 157, 154, 129, 294, 333, 347, 374, 512, 601, 655, 458, 577, 396, 189,

368, 627, 632, 678, 758, 764

QUASAR 1, 12, 512, 668, 671, 714

RCA 630, 333, 638, 122, 150, 154, 157, 289, 346, 347, 358, 396, 458, 483, 513,

577, 626, 646, 673

ROKU TV 513, 635, 150, 314

SAMSUNG 157, 739, 2, 158, 737, 759, 99, 360, 374, 784

SANSUI 338, 129, 335, 347, 450, 742

SANYO 376, 155, 513, 654

SCEPTRE 392, 374, 282, 790

SEARS 1, 150, 154, 157, 335, 360, 376, 396, 450, 591, 686, 690, 745

SEIKI 294, 154, 239, 360

SHARP 154, 249, 150, 634, 513, 470, 635,

SONY 374

SUPERSONIC 129, 188, 641, 644, 647, 672

SYLVANIA 563, 340, 686, 709, 1, 198, 335, 338, 631, 682, 686, 690

SYMPHONIC 335, 576, 682, 686, 690, 709

TCL 346, 513, 382, 1, 309, 512

TOSHIBA 360, 122, 377, 294, 450, 455, 670, 737, 153, 376, 472, 717, 785

VIEWSONIC 378, 141, 309, 543, 578, 590, 591, 592, 593, 594, 595, 1, 289, 549, 629

VIZIO 371, 628, 591, 594

WESTINGHOUSE 374, 157, 277, 294, 513, 594, 612, 639, 780, 513

WHITE-WESTINGHOUSE 338, 392, 483, 682, 699, 709

ZENITH 747, 38, 150, 152, 154, 603, 669, 682, 695, 709, 713, 727, 737, 742, 804,

814, 722

» Can’t ﬁnd your brand? More online at evoca.tv/setup

Guide VOD

Info

Input

??????? 12V

{Back of Pilot}

> SETUP

SET UP YOUR ANTENNA & INTERNET.

1 Mount your antenna.

A If you already have your own antenna installed, skip to Step 2.

B Identify an initial location to place your antenna - upper interior wall, on a window or exterior wall is usually the best.

C Mount your antenna (keep in mind that you may want to move your antenna after we check your reception

in POWER UP PILOT, Step 3).

D Refer to the antenna installation instructions now, but don’t connect the cable to your TV. You’ll read more

about that in a moment.

2 Connect your antenna to Pilot.

A Using the coax cable connect your antenna to the antenna connector on Pilot (Diagram 1).

3 Choose an internet connection to Pilot.

A If using your Wi-Fi network, you can skip this step. You’ll connect later as a part of the on-screen set-up.

B If connecting Scout directly to a modem or router, do so now using your Ethernet cable (Diagram 2).

CONNECT PILOT TO YOUR TV.

1 Connect HDMI cable.

A Connect the supplied HDMI cable from the HDMI port on Pilot to the HDMI input that you’ve identiﬁed

on your TV (Diagram 3).

B Some TVs have multiple HDMI ports, so take note of which HDMI input you are using.

C If you’d like, you can write it down here HDMI #___________

2 Turn on your TV.

A Using your TV’s remote control, turn on the TV and select the HDMI input you noted in Step 1C. HDMI cable

Diagram 3

POWER UP PILOT.

1 Connect Pilot to power.

A Using the Pilot power supply and power cable, connect Pilot to the power supply.

B Plug the power supply into a working power outlet.

C After a few seconds you should see the light on the bottom of your Pilot to begin blinking.

D Insert the batteries supplied with your Pilot into the remote by sliding down the lower back panel

of the remote and insert the batteries as in (Diagram 6).

2 Follow the on-screen instructions.

A If everything is good to this point, you should see an Android TV logo on your TV screen.

Pilot will then ﬂy you through the rest of the setup on screen.

B If you don’t see the Android TV logo followed by instructions, make sure your TV is set to the

HDMI input that Pilot is hooked up to. Then, make sure that your cables are connected.

3 Make sure Pilot has found your channels.

(Don’t worry, you are almost there).

A When all of the setup steps are complete, the bottom of your screen should look something like

this (Diagram 4) with navigation including Help, Messages, Settings, Favorites, Watch TV and

Guide (Diagram 5).

B Select Guide ( ) and scroll through the channels in your guide. Local channels you should

expect to see include CBS, NBC, ABC and Fox.

C You should also see your Evoca TV channels, such as the Weather Channel, Bloomberg and NFL Network.

D If you see all of these channels, you Pilot should have a solid green light on the bottom and you should be

all set to enjoy Evoca TV. If you didn’t get all of the channels that you expected, follow the instructions for

re-scanning for channels.

Diagram 4

Diagram 5

> Help

> Settings

> Favorites

> Watch TV

> Guide

PROGRAM YOUR EVOCA REMOTE.

A Reference the remote codes on the back page of this guide and note the codes for your brand of TV.

B On your new Evoca remote press the TV Input button ( ) and the OK button ( ) together and hold

for 2 seconds.

C Once the light on the remote is solid, release those buttons and enter the three digit code for your brand of TV.

D Test the Volume and power buttons. If it controls your TV, you are all set. If it doesn’t repeat Step B with the

next code for your TV.

Re-scanning for Channels

If you didn’t get all of the channels you were expecting in Power Up Pilot, Step 3, or at any time you aren’t receiving

the reception you expect, try the following steps:

•Move your antenna to a new location (keep in mind that higher is usually better and a window is sometimes

better than a wall).

•Using your Pilot remote, go to homescreen>settings>channel scan>channel scan and then scan. This will take

a few minutes, but Pilot will scan all available frequencies and look for all of your channels.

•If you have all of the channels you’d expect (see Power Up Pilot, Steps 3B & 3C), permanently mount your

antenna where it is and you are done.

•If you still don’t have all of your channels, go back to Power Up Pilot, Step 3 and try again. Depending on the

location and type of home as well as the type of antenna that you are using, it may take a few tries to get the

best possible signal. If you get stuck, please visit www.evoca.tv/setup or call us at 877-EVOCATV between

9am and 8pm MST. For after hours support, contact [email protected]v.

> Messages

Input Prime Video

(Future Use)

Power

TV Input

Video on Demand

Apps

Home

Back

Fast Forward

Play/Pause

Rewind

Channel Up/Down

Mute

Hey Google

Volume Up/Down

Sub-channel Tuning

Select/OK

Info

Guide

{Back of Pilot}

Coax cable

Diagram 1

??????? 12V

{Back of Pilot}

Ethernet cable

Diagram 2

Diagram 6

Insert batteries in your

Pilot remote prior to use

EVOCA Pilot Receiver User guide

Brand: EVOCA

Model: Pilot Receiver

Type: User guide

Download PDF

report

EVOCA Pilot Receiver User guide

EVOCA Pilot Receiver User guide

Related papers

Other documents