AMBIENTECH DT-24V-90W-W-N User manual

Type
User manual
P/N:DT-24V-90W-W-N
Wiring Diagram
With the power switched Off, connect the wires according
to the wiring diagram below.
Note: If you are connecting more than one wire to each
terminal, it is recommended to form a pigtail connection.
Before You Begin
To avoid fire, shock, or death, turn the power off
at circuit breaker and test to ensure
the power is off before wiring.
ON
OFF
2. Punch knockouts for wiring
conduit access
1. Open wiring compartment
Wiring
compartment
Customer Assistance
For more info
For technical questions regarding the installation or operation
of this product, please contact our customer support team:
www.ambientechinc.com
347-334-6368 ext 3
Quick Specs
Input Voltage 120-277VAC
Output Voltage 24VDC
Ambient Temp -30 °C - + 40 °C / -86°F - + 104°F
Environment Dry and Damp
LED Driver
E512089
R
Green
ZeroDrive
Line/Hot
Neutral
Green
Line/Hot
Neutral
-- -
++ -
+
WW
CW
1
0-10V Wall Switch
0-10V Wall Switch
Intensity
CCT
Mode Button
LED Indicator
Select Dimming Mode
LED Color Mode
Tunable WhiteGreen
RED Dim-to-Warm
Green
ZeroDrive
Line/Hot
Neutral
Green
Line/Hot
Neutral
-- -
++ -
+
WW
CW
1
0-10V Wall Switch
0-10V Wall Switch
Intensity
CCT
Installation Instructions
  • Page 1 1

AMBIENTECH DT-24V-90W-W-N User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI