PROAIM BMP60 R Pro User manual

Hello! I have reviewed the provided Assembly Manual for the PROAIM Microphone Windscreen BMP60 R Pro Long Blimp. This manual outlines the assembly process, including how to adjust the handle, insert different mics, and attach the fur cover for noise reduction. I'm ready to answer your questions about the product and its usage based on the content of the manual.
What is included in the package?

How do I adjust the blimp handle?

How do I minimize noise using fur cover?

What’s In The Box

Please inspect the contents of your shipped package to ensure you have received everything that is listed

below.

BMP60 R Pro Long Blimp Microphone Windscreen (BMP-60R)

Assembly Manua l

60cm Blimp Windscreen with

Microphone Suspension and Handle

Bonus 6 pc. Boom Pole

Adapter Set

Mic Holders

No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,

electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright

statutes or in wring by the Publisher.

60cm Synthec Fur Cover Accessories

• Loosen & ghten the ratchet knob to adjust

the blimp handle as per your requirement.

• Next, rotate and open the end cap.

Blimp Assembly

• Once the end cap is aached to the blimp

windscreen, you can cover it using the fur

cover.

NOTE: The fur cover serves the purpose of

further minimizing the noise. You can use 60cm

or 40cm fur cover depending on whether the

blimp is with or without the

extension.

• Open the locking clips at both the ends of the

blimp cage and slide out the mic holder rod.

• Insert dierent holder clamps in the

inseron slots to use other mics with

dierent diameters.

• Insert Mic into the suspension system and

connect it to a connector cable. Then,

re-aach the blimp cage.

• While using the blimp extension, aach the

extension to the blimp and close the blimp

windscreen with the end cap.

YOUR PROAIM BMP60 R PRO LONG BLIMP MICROPHONE WINDSCREEN

ALL DRESSED UP AND READY TO GO!

(SHOWN WITH OPTIONAL ACCESSORIES)

Warranty: We oer one year warranty for our products from date of purchase. Within this period of

me, we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs

nor does it cover a product subjected to misuse or accidental damage. Warranty repairs are subjected

to inspecon and evaluaon by us.

Liability: We are not liable for damage caused by products that we do not supply or from mishandling

in transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our

company.

utmost support and care unl you use our product.

PROAIM BMP60 R Pro User manual

Other documents