Belkin LBE002 Operating instructions

Type
Operating instructions

The Belkin LBE002 is a wireless charging device that provides efficient and convenient power transfer to compatible devices. With input power capabilities of 10W/18W, it delivers output power of 5W/7.5W/10W, optimizing the charging process for various devices.

The Belkin LBE002 is a wireless charging device that provides efficient and convenient power transfer to compatible devices. With input power capabilities of 10W/18W, it delivers output power of 5W/7.5W/10W, optimizing the charging process for various devices.

CAUTION:
. 1See instructions if the input spring does not fit the power outlet.
. 2IMPORTANT SAFETY INSTRUCTIONS.SAVE THESE INSTRUCTIONS.
DANGER TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
CAREFULY FOLLOW THESE INSTRUCTION.
. 3RISK OF ELECTRIC SHOCK.
. 4FOR INDOOR USE ONLY.
. 5Please check prior to use if voltage and current of the power supply
is suitable for the product.
. 6For information technology equipment use only.
. 7The socket-outlet shall be easily accessible.
. 8The cover may under no circumstances be opened. If the cover is
damaged, then the power supply may no longer be used.
. 9Children should be supervised to ensure that they do not play with
appliance.
10. Do not use in wet conditions.
11. Connect the power supply of the wireless charger into a power
outlet that is close by and is easy to disconnect from the source.
12. Avoid charging near sources of heat and humidity.
13. Keep the wireless charger and power supply away from any
liquids or moisture.
14. Unplug the wireless charger when not in use for long periods
of time.
15. Do not store your device in very hot or very cold locations. It is
recommended to use your device at room temperature.
16. Do not use if visible defects are observed on the wireless
charger or power supply.
17. Do not attempt to service, modify, or disassemble the wireless
charger or power supply.
18. Use of a power supply not recommended may result in an
increased risk of fire, electric shock, injury, or damage to the
user, product, or other property.
19. Wireless charging power transmission rate is regulated by
the wireless charging device receiving power which can
be influenced by factors like, but not limited to, proprietary
charging protocols, ambient temperature, current battery
percentage level and age of the device being charged.
The marking information is located at the bottom of apparatus.
FCC Statement
The device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:(1) this device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
Note: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy,
and if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try and correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the distance between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from
that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for
help.
CAUTION: Changes or modifications not expressly approved by the
party responsible for compliance could void the user’s authority to
operate this equipment.
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set
forth for an uncontrolled environment. This equipment should be
installed and operated with a minimum distance of 20 cm between
the radiator and your body.
WorkLife Brands LLC
Framingham, MA 01702
8850-01529 Rev.A00
5 Year Limited Warranty
WorkLife Brands LLC warrants, to the original purchaser, this
NXT Technologies product against defects in material and
workmanship under normal use and service for 5 (five) years
from the original date of purchase. WorkLife Brands LLC, at its
option, shall repair or replace the defective unit covered by this
warranty. Please retain the dated sales receipt as evidence of the
date of purchase as it will be required for any warranty service. In
order to keep the warranty in effect, the product must have been
handled and used as described in the instructions accompanying
this warranty. This warranty does not cover any damage due
to accident, misuse, abuse or negligence. To make a warranty
claim, please contact NXT Technologies product support at
1-800-270-9165.
Limitation Of Liability
Except to the extent of repairing or replacing this product as
expressly stated in the limited warranty described herein, WorkLife
Brands LLC shall not be liable for any damages, whether direct,
indirect, incidental, special, consequential, exemplary, or otherwise,
including lost revenues, lost profits, loss of use of software, loss
or recovery of data, rental of replacement equipment, downtime,
damage to property, and third-party claims, arising out of any theory
of recovery, including statutory, contract or tort. Notwithstanding
the term of any limited or implied warranty, or in the event that
any limited warranty fails of its essential purpose, in no event will
WorkLife Brands LLC’s entire liability exceed the purchase price of
this product. Some states and provinces do not allow the exclusion
or limitation of incidental or consequential damages so the above
limitations or exclusions may not apply to you. This limited warranty
gives you specific legal rights. You may have other rights which vary
from state to state and province to province.
Product information (NX60454)
Input Power: 10W/18W
Output Power: 5W/7.5W/10W
Product Dimension: 102.8mm x 102.8mm x 10mm
Product information (NX60455)
Input Power: 10W/18W
Output Power: 5W/7.5W/10W
Product Dimension: 74mm x 80mm x 114.8mm
GLOBAL PACKAGE OPERATIONS XXXXX
FILE
NAME INSERT_8850-01529_RevA00_BOOSTCHARGE_Wireless_Charging_V2
SKU# LBE002, LBF006 P# 8830-28183 REV A00
DESIGNER Anny DAT E 12/15/21 2:20 PM VERSION 02
  • Page 1 1

Belkin LBE002 Operating instructions

Type
Operating instructions

The Belkin LBE002 is a wireless charging device that provides efficient and convenient power transfer to compatible devices. With input power capabilities of 10W/18W, it delivers output power of 5W/7.5W/10W, optimizing the charging process for various devices.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI