Lightolier Calculite LED 4" Adjustable Accent, Finishing Reflector, White (painted) finish, White (painted) flange Install Instructions

Type
Install Instructions

This manual is also suitable for

Lightolier Calculite LED 4" Adjustable Accent, Finishing Reflector, White (painted) finish, White (painted) flange is a recessed lighting fixture that can be adjusted to provide the perfect amount of light for any space. Here are some of its features:

  • Adjusts up or down in 0.030" increments to ensure a flush fit with the ceiling or a maximum of 0.03" recessed from the ceiling.
  • Easy to install with pull tether and alignment feature.
  • Can be removed by grasping the edge of the reflector flange and pulling downwards, and using a flathead screwdriver to pry the push-in connector from the trim for complete removal.

Lightolier Calculite LED 4" Adjustable Accent, Finishing Reflector, White (painted) finish, White (painted) flange is a recessed lighting fixture that can be adjusted to provide the perfect amount of light for any space. Here are some of its features:

  • Adjusts up or down in 0.030" increments to ensure a flush fit with the ceiling or a maximum of 0.03" recessed from the ceiling.
  • Easy to install with pull tether and alignment feature.
  • Can be removed by grasping the edge of the reflector flange and pulling downwards, and using a flathead screwdriver to pry the push-in connector from the trim for complete removal.
  • Page 1 1
  • Page 2 2

Lightolier Calculite LED 4" Adjustable Accent, Finishing Reflector, White (painted) finish, White (painted) flange Install Instructions

Type
Install Instructions
This manual is also suitable for

Lightolier Calculite LED 4" Adjustable Accent, Finishing Reflector, White (painted) finish, White (painted) flange is a recessed lighting fixture that can be adjusted to provide the perfect amount of light for any space. Here are some of its features:

  • Adjusts up or down in 0.030" increments to ensure a flush fit with the ceiling or a maximum of 0.03" recessed from the ceiling.
  • Easy to install with pull tether and alignment feature.
  • Can be removed by grasping the edge of the reflector flange and pulling downwards, and using a flathead screwdriver to pry the push-in connector from the trim for complete removal.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI