Delta 9178T-AR-DST Specification

Category
Faucets
Type
Specification

This manual is also suitable for

Submitted Model No.: _______________________________________________
Specific Features: __________________________________________________
Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue
models, both without notice or obligation. Dimensions are for reference only. See current full-line price book or
www.deltafaucet.com for finish options and product availability.
DSP-K-9178T-DST Rev. C
7 1/4"
(184 mm)
14 7/8"
(378 mm)
9 13/64"
(234 mm)
2 1/2"
(64 mm)
Max.
2 1/2"
(64 mm)
Max.
8"
(203 mm)
Centers
10 3/4"
(273 mm)
4 3/4"
(121 mm)
3 3/16"
(81 mm)
Min. 2 1/2" (64 mm)
Clearance to Back Splash
8"
(203 mm)
35"
(889 mm)
33 1/2"
(851 mm)
1 1/4"
(32 mm)
min.
2 3/8"
(60 mm)
3/8"
Compression
Fittings
1 3/8"
(35 mm)
Hole Size
3x 1 3/8"
(35 mm)
Hole Size
9178T-DST
15 3/8"
(391 mm)
WARRANTY
Lifetime limited warranty on parts (other than
electronic parts and batteries) and finishes:
or, for commercial users, for 5 years from
date of purchase.
5 year limited warranty on electronic parts
(other than batteries); or, for commercial
users, for 1 year from the date of purchase.
No warranty is provided on batteries.
KITCHEN FAUCETS
Leland
®
Collection
Single Handle Pull-Down
FEATURES:
• Touch
2
O
®
Technology
• DIAMOND Seal
®
Technology
• MagnaTite
®
Magnetic Docking
Touch-Clean
®
Sprayhead
ShieldSpray
TM
Technology
STANDARD SPECIFICATIONS:
• Maximum
1.8 gpm @ 60 psi, 6.8 L/min @ 414 kPa
One or three hole mount (escutcheon optional, included)
Diamond coated ceramic cartridge
3/8" O.D. straight, staggered PEX supply tubes
Spout rotates 360°
Red/blue indicator markings
Three-function wand: aerated stream, spray or
ShieldSpray
Dual integral double check valves in sprayer
LED indicator light signals on-off, water temperature
and when batteries run low.
• Uses 6 AA batteries (included) or 6 C batteries
(not included).
• Optional (EP73954) 120V AC adapter available (3 prong
grounded outlet required)
COMPLIES WITH:
ASME A112.18.1 / CSA B125.1
ASME A112.18.6
Indicates compliance to
ICC/ANSI A117.1 - Valve control only
Verified compliant with .25% weighted average Pb
content regulations
Delta Faucet Company
55 E. 111th Street, Indianapolis, IN 46280
350 South Edgeware Road, St. Thomas, ON N5P 4L1
© 2017 Delta Faucet Company
7 7/8"
(200 mm)
  • Page 1 1

Delta 9178T-AR-DST Specification

Category
Faucets
Type
Specification
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI