Kohler 9481-L-2BZ Installation guide

Kohler
Brand
Kohler
Model
9481-L-2BZ
Type
Installation guide

This manual is also suitable for

Kohler 9481-L-2BZ is a trip lever designed for use with Kohler toilets. It is made of durable plastic and features a sleek, modern design. The trip lever is easy to install and comes with all the necessary hardware.

The Kohler 9481-L-2BZ trip lever has a number of features that make it a great choice for your toilet. First, the trip lever is adjustable, so you can customize the amount of force required to flush the toilet. This is a great feature for households with children or people with disabilities. Second, trip lever is designed to be water-efficient, which can help you save money on your water bill. Finally, the trip lever is backed by Kohler's one-year limited warranty, so you can be sure that it will last for years to come.

Kohler 9481-L-2BZ is a trip lever designed for use with Kohler toilets. It is made of durable plastic and features a sleek, modern design. The trip lever is easy to install and comes with all the necessary hardware.

The Kohler 9481-L-2BZ trip lever has a number of features that make it a great choice for your toilet. First, the trip lever is adjustable, so you can customize the amount of force required to flush the toilet. This is a great feature for households with children or people with disabilities. Second, trip lever is designed to be water-efficient, which can help you save money on your water bill. Finally, the trip lever is backed by Kohler's one-year limited warranty, so you can be sure that it will last for years to come.

Page is loading ...
Thank You For Choosing Kohler Company
We appreciate your commitment to Kohler quality. Please take a few
minutes to review this manual before you start installation. If you
encounter any installation or performance problems please don’t
hesitate to contact us. Our phone numbers and website are listed on
the back cover. Thanks again for choosing Kohler Company.
Tools and Materials
Before You Begin
NOTE: For ease of installation, change the trip lever before installing
the toilet or tank.
Observe all local plumbing codes and building codes.
Kohler Co. reserves the right to make revisions in the design of
trip levers without notice, as specified within the Price Book.
Screwdrivers
1045428-2-A 2 Kohler Co.
Install New Trip Lever
Remove the tank cover from the toilet.
IMPORTANT! Do not drop the nut into the vitreous tank. If the nut
falls below the water reservoir, it is not accessible.
Loosen and remove the nut securing the trip lever to the tank by
turning it clockwise. The nut has left-hand threads.
Remove the existing trip lever.
From outside the tank, insert the replacement trip lever arm
through the hole in the tank, sliding the trip lever arm through
the nut.
When seating the bushing against the outside of the tank,
position the trip lever arm below the plunger arm.
Hand tighten the nut turning it counterclockwise. The nut has
left-hand threads.
Check the gap between the top surface of the actuator and the
bottom of the plunger arm. The acceptable range should be
between 1/16″ (2 mm) and 1/8″ (3 mm).
NOTE: If less than a 1/16″ (2 mm) gap is provided, the toilet will
not shut off. More than a 1/8″ (3 mm) gap may cause the flush to be
too short.
Locknut
Plastic
Guard
Plunger
Arm
Plunger
Arm
Plunger
Arm
Hook
Back
Locking
Tab
Trip Lever Trip Arm
Actuator
Front Locking Tab
Kohler Co. 3 1045428-2-A
Install New Trip Lever (cont.)
If the gap is not correct, loosen the setscrew at the top of the
actuator with a Phillips screwdriver. Turn the actuator clockwise
to increase the gap and counterclockwise to decrease the gap.
Once acceptable, tighten the setscrew.
Check assembly for smooth operation and flush actuation.
Replace the tank cover.
1045428-2-A 4 Kohler Co.
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12

Kohler 9481-L-2BZ Installation guide

Kohler
Brand
Kohler
Model
9481-L-2BZ
Type
Installation guide
This manual is also suitable for

Kohler 9481-L-2BZ is a trip lever designed for use with Kohler toilets. It is made of durable plastic and features a sleek, modern design. The trip lever is easy to install and comes with all the necessary hardware.

The Kohler 9481-L-2BZ trip lever has a number of features that make it a great choice for your toilet. First, the trip lever is adjustable, so you can customize the amount of force required to flush the toilet. This is a great feature for households with children or people with disabilities. Second, trip lever is designed to be water-efficient, which can help you save money on your water bill. Finally, the trip lever is backed by Kohler's one-year limited warranty, so you can be sure that it will last for years to come.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents