StarTech.com SFPG1320C Datasheet

Category
Network transceiver modules
Type
Datasheet

StarTech.com SFPG1320C is a Cisco-compatible SFP transceiver module designed for Gigabit fiber networking. It supports data rates up to 1.25 Gbps and distances up to 20 km (12.4 miles) over single-mode fiber using a 1310nm wavelength. With its LC fiber connector and hot-pluggable design, it can be easily installed into MSA or Cisco-compliant SFP ports without interrupting network traffic.

The SFPG1320C is ideal for replacing defective or damaged SFPs, expanding networks to remote segments, or upgrading fiber networking equipment. It supports Digital Diagnostics Monitoring (DDM), allowing you to monitor SFP parameters such as optical power, temperature, and voltage. This information can be useful for troubleshooting and maintaining your fiber network.

StarTech.com SFPG1320C is a Cisco-compatible SFP transceiver module designed for Gigabit fiber networking. It supports data rates up to 1.25 Gbps and distances up to 20 km (12.4 miles) over single-mode fiber using a 1310nm wavelength. With its LC fiber connector and hot-pluggable design, it can be easily installed into MSA or Cisco-compliant SFP ports without interrupting network traffic.

The SFPG1320C is ideal for replacing defective or damaged SFPs, expanding networks to remote segments, or upgrading fiber networking equipment. It supports Digital Diagnostics Monitoring (DDM), allowing you to monitor SFP parameters such as optical power, temperature, and voltage. This information can be useful for troubleshooting and maintaining your fiber network.

Cisco Compatible Gigabit Fiber SFP Transceiver Module SM LC w/ DDM – 20 km (Mini-GBIC)
StarTech ID: SFPG1320C
The SFPG1320C Cisco® Compatible Gigabit Fiber SFP Transceiver Module SM LC – 20 km (12.4 miles) is built
to comply with MSA (Multi-Sourcing Agreement) standards to offer a cost-effective way to add, replace or
upgrade a Single-Mode LC port on your Gigabit fiber networking equipment or fiber media converter.
Supporting data rates up to 1.25 Gbps as well as Digital Diagnostics Monitoring (DDM), this LC SFP/Mini-GBIC
module can be installed into any fiber networking device with an MSA or Cisco compliant SFP port. Delivering
both convenience and scalability, this fiber transceiver is fully hot-pluggable, which enables you to install the
module without interrupting network traffic or requiring a device reboot.
This 1310nm single-mode SFP module is compatible with Cisco equipment.
Backed by a StarTech.com 3-year warranty and free lifetime technical support.
Applications
Replacing defective or damaged SFPs in MSA compliant or Cisco equipment
Expand your network to remote segments
www.startech.com
1 800 265 1844
Features
Data rates up to 1.25 Gbps
Supports distances up to 20 km (12.4 miles)
Complies with SFP Multi-Source Agreements standards (MSA)
Compatible with Cisco equipment
LC Fiber connector
Fully Hot Pluggable
Technical Specifications
Warranty 3 Years
WDM No
Industry Standards IEEE 802.3z 1000BASE-LH
Local Unit Connectors 1 - Fiber Optic LC Duplex Female
Maximum Data Transfer Rate 1.25 Gbps
Max Transfer Distance 20 km (12.4 mi)
Fiber Type Single Mode
Wavelength 1310nm
Fiber Operating Mode Half/Full-Duplex
DDM Yes
Compatible Networks 1000 Mbps (1 Gbps)
System and Cable Requirements MSA or Cisco compliant SFP port
Note For use in Gigabit fiber networking equipment and media converters
Product Length 2.4 in [60 mm]
Product Width 0.5 in [12 mm]
Product Height 0.4 in [10 mm]
Product Weight 0.6 oz [17 g]
Operating Temperature 0°C to 70°C (32°F to 158°F)
Storage Temperature -40°C to 85°C (-40°F to 85°F)
Humidity 30~70% RH
Shipping (Package) Weight 1.7 oz [49 g]
Included in Package 1 - 1.25 Gbps Single Mode LC SFP
www.startech.com
1 800 265 1844
Certifications, Reports and Compatibility
www.startech.com
1 800 265 1844
  • Page 1 1
  • Page 2 2
  • Page 3 3

StarTech.com SFPG1320C Datasheet

Category
Network transceiver modules
Type
Datasheet

StarTech.com SFPG1320C is a Cisco-compatible SFP transceiver module designed for Gigabit fiber networking. It supports data rates up to 1.25 Gbps and distances up to 20 km (12.4 miles) over single-mode fiber using a 1310nm wavelength. With its LC fiber connector and hot-pluggable design, it can be easily installed into MSA or Cisco-compliant SFP ports without interrupting network traffic.

The SFPG1320C is ideal for replacing defective or damaged SFPs, expanding networks to remote segments, or upgrading fiber networking equipment. It supports Digital Diagnostics Monitoring (DDM), allowing you to monitor SFP parameters such as optical power, temperature, and voltage. This information can be useful for troubleshooting and maintaining your fiber network.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI