Bretford 3570-GMQ Datasheet

Category
Computer desks
Type
Datasheet
FEATURES
Attractive Grey laminate tabletop trimmed with bullnose edge band in your choice of four trim colors, Quartz grey, Cardinal red, Polo green,
or Topaz blue. Also available for special order in any Bretford paint, trim and laminate option.
Work surface is height adjustable in one inch increments from 24" to 32".
Cord management bin with flip down door and grommet holes hide and organize electrical cords. Cord bin is set back 13" from the front edge
of the table on 24"d models and 16" from the front edge of the table on 30"d models..
30", 36" and 42"w tables have one grommet hole and 48", 60" and 72"w tables have two grommet holes.
14-gauge sturdy steel base is constructed with an average of 30% post-consumer recycled steel and features a unique “Y” shape design.
Complies with the GREENGUARD Environmental Institute’s GREENGUARD Children & Schools Indoor Air Quality standards, contributing to
points toward Leadership in Energy and Environmental Design (LEED) Certification.
Work surfaces feature a 1”, 45 lb density, furniture board substrate with laminated top and 3mm T-mold edge band that is attached along the
entire perimeter of the top.
Tops feature metal threaded inserts on the underside to attach the leg assemblies to for a metal to metal connection that adds strength and
greatly reduces the possibility screws will strip or fall out over time.
Tables come with adjustable floor glides or 4" casters, two casters are locking.
42", 48", 60" and 72"w tables are able to be accessorized with the PowerBar cord management system.
• Options include a 6-outlet power strip (ECF6), the Juice Power System, PowerBar cord management and hardwired electrical assembly, CPU
tower holder, keyboard drawer, and work surface bridge packs.
Proudly made in the U.S.A. using union labor.
The Connections Adult Height Adjustable Work
Centers provide maximum user comfort,
attractive design, and sturdy construction.
Tables feature grommet holes and hinged cord
management bins for cords and wires along
with integrated modesty panels. Work centers
have adjustable floor glides.
BRETFORD BASICS
CONNECTIONS ADULT HEIGHT
ADJUSTABLE WORK CENTERS
Shown with optional Slim CPU
Tower holder 35MTCHRN-GM
Made In The USA
STANDARD COLOR/FINISH
Base/Tabletops: Grey powder paint/Grey laminate
Trim, Toe Caps & Grommet Holes: Available in Cardinal (GMC),
Topaz (GMT), Polo (GML) and Quartz (GMQ)
PREMIUM COLOR/FINISH OPTIONS
Connections tables may be special ordered in any of Bretford’s
premium finish offerings. For a complete listing of premium finishes
please visit us on the web at www.bretford.com.
TABLE ACCESSORIES
3557-GM Flat Connecting Bracket
3573-GM Connections Bridge Pack
35CPUHRN-GM Standard CPU Tower Leg Harness
35MTCHRN-GM Slim CPU Tower Leg Harness
UCSKD-GM Keyboard Drawer
(Note: UCSKD will not fit on 30"W tables)
UCSKDMP2-GM Keyboard Drawer w/Mouse Extension
(Note: UCSKDMP2 will not fit on 30"W tables)
SOFTWIRED POWER OPTION
ECF6 6-Outlet Power Strip (1 each table)
JUICE SOFTWIRE POWER SYSTEM OPTION
DPCF4 Juice 4-Outlet Power Strip (1 each table)
DPP120 Juice Power In-Feed Cable (1 each row)
DPJ32 Juice Power Jumper Cable 32"L (30"w to 30"w tables)
DPJ38 Juice Power Jumper Cable 38"L (36"w to 36"w tables)
DPJ42 Juice Power Jumper Cable 42"L (42"w to 42"w tables)
DPJ54 Juice Power Jumper Cable 54"L (36"w to 60"w and 72"w,
and 48"w to 42"w, 48"w and 60"w tables)
DPJ62 Juice Power Jumper Cable 62"L (60"w to 60"w and 48"w
to 72"w tables)
DPJ74 Juice Power Jumper Cable 74"L (72"w to 72"w tables)
HARDWIRE POWER SYSTEM OPTION
35PBR42-GM PowerBar Raceway, 42" Table
35PBH42 Power Harness, 42" Table (holds 2 Duplex)
35PBR48-GM PowerBar Raceway, 48" Table
35PBH48 Power Harness, 48" Table (holds 2 Duplex)
35PBR60-GM PowerBar Raceway, 60" Table
35PBH60 Power Harness, 60" Table (holds 2 Duplex)
35PBR72-GM PowerBar Raceway, 72" Table
35PBH72 Power Harness, 72" Table (holds 2 Duplex)
DUPLC_ Duplex Circuit 1, 2, 3 or 4 (2 each table)
JPCPT30 Jumper Cable, Any Size Table
JHDES Power Entry Cable (1 each row)
35PBRCAP-GM Pair Raceway End Caps, (1 each row)
35PBFD-GM Raceway Wire Chase (leads cable to floor)
35PBDCLP-GM Raceway Data Clip (data jacks not included)
MADE IN THE USA
All Connections series tables are made at one of Bretford’s Chicago
area manufacturing facilities using union labor.
SUGGESTED SPECIFICATIONS
All tables are height adjustable from 24–32" in 1" increments. Table
top is made from 1" thick laminate furniture board, 45-pound density.
Cord management bin is constructed from 20 gauge steel and
measures 4"h x 5-3⁄8"d. It runs the width of the table, allowing space
for optional shelves to be attached. One side is attached with hinges
to the back of the modesty panel, and the other side closes with the
choice of a thumb screw or theft proof screw (included) which
attaches to the bottom of the work surface. 30”, 36” and 42”w work
centers have one grommet hole measuring 1-1⁄2" x 4" centered on
the work surface. The 48”w work centers have two grommet holes
located 24" apart. The 60” and 72”W work centers have two
grommet holes located 30" apart. On the 72”w units, a 1"-square 18-
gauge tube connects beneath the surface and runs across the length
of the table between leg assemblies. Metal threaded inserts are
installed into the underside of each top so the base is attached with
a metal to metal connection. The legs are constructed from 14-gauge
steel and the upper leg fits over the lower leg for height adjustability.
The upper leg section is 1-1/4" x 2" steel tubing and the lower leg is 1"
x 1-3/4". A modesty panel is constructed from 18-gauge steel and
runs the width between the upper legs. Table shall be GREENGUARD
INDOOR AIR QUALITY CERTIFIED
®
for Children and Schools. All steel
parts are constructed with “prime” steel which has a 25% to 35%
post-consumer recycled content and are finished in environmentally
friendly Grey Mist powder paint. Model comes with adjustable glides
or 4” casters.
Quartz
-GMQ
Cardinal
-GMC
Polo
-GML
To p a z
-GMT
ECF6 Power Strip
Juice Power System
PowerBar Hardwired System
©2002 Bretford / b_adult_connections_wc / 04-08-2011
OVERALL DIMENSIONS
24"d Work Centers with Glides
3569-GM_ 36"w x 24"d x 24–32"h
3570-GM_ 48"w x 24"d x 24–32"h
3561-GM_ 60"w x 24"d x 24–32"h
3565-GM_ 72"w x 24"d x 24–32"h
24"d Work Centers with Casters
3520-GM_ 36"w x 24"d x 24–32"h
3522-GM_ 48"w x 24"d x 24–32"h
3560-GM_ 60"w x 24"d x 24–32"h
3564-GM_ 72"w x 24"d x 24–32"h
30"d Work Centers with Glides
3576-GM_ 30"w x 30"d x 24–32"h
3521-GM_ 36"w x 30"d x 24–32"h
3515-GM_ 42"w x 30"d x 24–32"h
3523-GM_ 48"w x 30"d x 24–32"h
3524-GM_ 60"w x 30"d x 24–32"h
3525-GM_ 72"w x 30"d x 24–32"h
30"d Work Centers with Casters
3577-GM_ 30"w x 30"d x 24–32"h
3517-GM_ 36"w x 30"d x 24–32"h
3514-GM_ 42"w x 30"d x 24–32"h
3518-GM_ 48"w x 30"d x 24–32"h
3519-GM_ 60"w x 30"d x 24–32"h
3526-GM_ 72"w x 30"d x 24–32"h
LEG SPACE DIMENSIONS
24"d Work Centers with Glides
3569-GM_ 31" between legs, 12
1/2
" to modesty, 23"-31" under top
3570-GM_ 43" between legs, 12
1/2
" to modesty, 23"-31" under top
3561-GM_ 55" between legs, 12
1/2
" to modesty, 23"-31" under top
3565-GM_ 67" between legs, 12
1/2
" to modesty, 23"-31" under top
24"d Work Centers with Casters
3520-GM_ 31" between legs, 12
1/2
" to modesty, 23"-31" under top
3522-GM_ 43" between legs, 12
1/2
" to modesty, 23"-31" under top
3560-GM_ 55" between legs, 12
1/2
" to modesty, 23"-31" under top
3564-GM_ 67" between legs, 12
1/2
" to modesty, 23"-31" under top
30"d Work Centers with Glides
3576-GM_ 25" between legs, 15
1/2
" to modesty, 23"-31" under top
3521-GM_ 31" between legs, 15
1/2
" to modesty, 23"-31" under top
3515-GM_ 37" between legs, 15
1/2
" to modesty, 23"-31" under top
3523-GM_ 43" between legs, 15
1/2
" to modesty, 23"-31" under top
3524-GM_ 55" between legs, 15
1/2
" to modesty, 23"-31" under top
3525-GM_ 67" between legs, 15
1/2
" to modesty, 23"-31" under top
30"d Work Centers with Casters
3577-GM_ 25" between legs, 15
1/2
" to modesty, 23"-31" under top
3517-GM_ 31" between legs, 15
1/2
" to modesty, 23"-31" under top
3514-GM_ 37" between legs, 15
1/2
" to modesty, 23"-31" under top
3518-GM_ 43" between legs, 15
1/2
" to modesty, 23"-31" under top
3519-GM_ 55" between legs, 15
1/2
" to modesty, 23"-31" under top
3526-GM_ 67" between legs, 15
1/2
" to modesty, 23"-31" under top
ADDITIONAL DIMENSIONS
Cord Bin: 4"h x 5-3/8"d (width is 10" less than the table width)
Distance From Front Edge to Cord Bin: 24"d table - 12-1/2"d
30"d table - 15-1/2"d
Distance Between Legs: 10" less than the overall table width
STANDARD EQUIPMENT
Table top (1)
Left and Right leg assembly (1 each)
Modesty panel (1)
Cord management bin (1)
Adjustable floor glides (4) or 4" casters (4), (2) lock
WEIGHT AND FREIGHT CLASS
Model 3514-GM_ 90 pounds, Freight class 70 UPS or LTL
Model 3515-GM_ 86 pounds, Freight class 70 UPS or LTL
Model 3517-GM_ 67 pounds, Freight class 70 UPS or LTL
Model 3518-GM_ 86 pounds, Freight class 70 UPS or LTL
Model 3519-GM_ 110 pounds, Freight class 70 LTL
Model 3520-GM_ 71 pounds, Freight class 70 UPS or LTL
Model 3521-GM_ 64 pounds, Freight class 70 UPS or LTL
Model 3522-GM_ 80 pounds, Freight class 70 LTL
Model 3523-GM_ 82 pounds, Freight class 70 LTL
Model 3524-GM_ 106 pounds, Freight class 70 LTL
Model 3525-GM_ 110 pounds, Freight class 70 LTL
Model 3526-GM_ 114 pounds, Freight class 70 LTL
Model 3560-GM_ 84 pounds, Freight class 70 LTL
Model 3561-GM_ 81 pounds, Freight class 70 LTL
Model 3564-GM_ 107 pounds, Freight class 70 LTL
Model 3565-GM_ 111 pounds, Freight class 70 LTL
Model 3569-GM_ 65 pounds, Freight class 70 UPS or LTL
Model 3570-GM_ 74 pounds, Freight class 70 LTL
Model 3576-GM_ 56 pounds, Freight class 70 UPS or LTL
Model 3577-GM_ 87 pounds, Freight class 70 UPS or LTL
All ship ready to assemble in one carton pack.
11000 SEYMOUR AVENUE
FRANKLIN PARK, ILLINOIS 60131 USA
TOLL FREE PHONE 800-521-9614
PHONE 847-678-2545
TOLL FREE FAX 800-343-1779
FAX 847-678-0852
WWW.BRETFORD.COM
  • Page 1 1
  • Page 2 2
  • Page 3 3

Bretford 3570-GMQ Datasheet

Category
Computer desks
Type
Datasheet

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI