Hummer H3 2007 Owner's manual

Overview

........................................................ 3

Overview

.................................................. 4

Features and Controls

................................ 15

Features and Controls

............................ 16

Navigation Audio System

............................ 57

Navigation Audio System

........................ 58

Index

............................................................ 69

2007 HUMMER H3 Navigation System M

1

GENERAL MOTORS, GM, the GM Emblem,

HUMMER, and the name HUMMER are registered

trademarks; and H3 is a trademark of General

Motors Corporation.

The information in this manual supplements the

owner manual. This manual includes the latest

information available at the time it was printed.

We reserve the right to make changes in

the product after that time without notice.

For vehicles ﬁrst sold in Canada, substitute the

name General Motors of Canada Limited for

HUMMER whenever it appears in this manual.

Keep this manual with the owner manual in the

vehicle, so it will be there if it is needed. If the

vehicle is sold, leave this manual in the vehicle.

Canadian Owners

For Canadian owners that would like to obtain a

French language manual, see “Canadian Owners”

in the Index of your vehicle’s owner manual.

Litho in U.S.A.

Part No. 15891547 A First Printing

©

2

Overview ......................................................... 4

Navigation System Overview ......................... 4

Getting Started .............................................. 6

Cleaning the Video Screen .......................... 13

Section 1 Overview

3

Overview

Navigation System Overview

4

A. X (Tilt Open/CD Eject) Key. See “Hard Keys”

under Using the Navigation System on page 16.

B. Directional Indicator. See Symbols on page 22.

C.

X (DVD Eject) Key. See “Hard Keys” under

Using the Navigation System on page 16.

D. CD Loading Slot. See CD Player on page 66.

E. DVD Loading Slot. See “Loading a DVD

Map Disc” under Getting Started on page 6.

F.

P (Power/Volume) Knob. See “Hard Keys”

under Using the Navigation System on page 16.

G. NAV (Navigation) Key. See “Hard Keys” under

Using the Navigation System on page 16.

H. NAV RPT (Navigation Repeat) Key. See “Hard

Keys” under Using the Navigation System

on page 16.

I. BAND Key. See “Playing the Radio” under

Navigation Audio System on page 58.

J.

w SEEK x Key. See “Finding a Station”

under Navigation Audio System on page 58

or CD Player on page 66.

K.

B (CD) Key. See CD Player on page 66.

L.

e (Audio) Key. See Navigation Audio System

on page 58.

M. CONFIG (Conﬁgure) Key. See “Hard Keys”

under Using the Navigation System on page 16.

N.

O (Tuning) Knob. See “Finding a Station”

under Navigation Audio System on page 58.

O.

V (Zoom In) Screen Button. See “Touch

Sensitive Screen Buttons” under Using

the Navigation System on page 16.

P. Dest (Destination) Screen Button. See

“Touch Sensitive Screen Buttons” under

Using the Navigation System on page 16.

Q. Nav (Navigation) Options Screen Button.

See “Touch Sensitive Screen Buttons” under

Using the Navigation System on page 16.

R. Nav

y (Navigation Menu) Screen Button.

See “Touch Sensitive Screen Buttons” under

Using the Navigation System on page 16.

S.

U (Zoom Out) Screen Button. See

“Touch Sensitive Screen Buttons” under

Using the Navigation System on page 16.

T. Clock. See “Clock” under Conﬁgure Menu

on page 50.

5

Getting Started

Before you begin to operate the navigation

system, read this manual thoroughly to become

familiar with it and to understand how the

system works.

Keeping your mind on the drive is important

for safe driving. See “Defensive Driving” in the

Index of your vehicle’s owner manual for

more information. Get familiar with your vehicle’s

navigation system so you can use it with less

effort and take full advantage of its features.

Your navigation system includes not only

navigation, but also audio functions. While your

vehicle is parked:

• Familiarize yourself with all of its controls:

hard keys on the faceplate and touch-sensitive

screen buttons.

• Familiarize yourself with its operation.

• Set up your audio by presetting your favorite

stations, setting the tone, and adjusting the

speakers. Then, when driving conditions

permit, you can tune to your favorite stations

using the presets and steering wheel

controls (if equipped).

• Set up the navigation features that can only

be done before you begin driving, such as

entering an address or a preset destination.

Entering a destination or alphanumeric text

requires many steps, so you can only perform

these operations when the vehicle is in PARK (P).

You will notice that touch-sensitive screen

buttons leading to the alphanumeric keyboard

are dimmed out while driving.

Other functions may also be locked out while

driving and they too will appear grayed out on the

screen — but all functions are available when

parked. Some functions can be performed while

driving, as long as you can do so without diverting

too much of your attention from your driving.

6

{CAUTION:

This system provides you with a far greater

access to audio stations and song listings.

Giving extended attention to entertainment

tasks while driving can cause a crash and

you or others can be injured or killed.

Always keep your eyes on the road and

your mind on the drive — avoid engaging

in extended searching while driving.

{CAUTION:

Looking at the moving map on the

navigation screen frequently or for too

long while driving can cause a crash and

you or others can be injured or killed.

CAUTION: (Continued)

Keep your eyes and mind on the road

and avoid looking too long or too often

at the moving map on the navigation

screen. Use the voice guidance directions

whenever possible.

The navigation system allows you to do the

following:

• Plan a route with provided turn-by-turn route

and map guidance with voice prompts.

• Select a destination using various methods

and choices.

The information in the system may not always be

complete. Road conditions such as prohibited

turns, detours, and construction zones, change

frequently. It is important to consider whether you

can follow the directions given by the system

for the current conditions.

7

Every ﬁfty times the vehicle is started and the

navigation system is turned on, the CAUTION

screen will appear. Touch the Next screen button

for the map DVD information to load. You can

also select to change the language, Eng (English)

or Fr (French). See “Language” under Conﬁgure

Menu on page 50 for more information.

When getting started, you may set the navigation

system to your preference using various options.

You will also need to know how to perform various

functions to begin route guidance. Reference

the following topics for further information:

Setting Radio Station Presets

To set preset radio stations, do the following:

1. Press the power/volume knob to turn

the system on.

2. Press the BAND hard key to access the band

menu and select the desired band (AM, FM1,

FM2, XM1, or XM2 (if equipped).

3. Use the tuning knob or the SEEK hard key

arrows to select a station.

4. Touch and hold one of the six screen buttons

at the bottom of the screen until you hear

a beep or see the station displayed on

the selected preset button.

Setting the Time

To set the time, do the following:

1. Press the power/volume knob to turn the

system on.

2. Press the CONFIG hard key.

3. Touch the Clock screen button.

4. Scroll through the Time Zones until the

desired time zone is highlighted.

5. Touch the Daylight Savings screen button.

8

The time is now set. Touch the Manual Adjust

screen button if you need to further adjust the time.

The radio will use the GPS satellite to set the

time. The vehicle needs to be in an open area

to receive the signal. See Global Positioning

System (GPS) on page 53 for more information.

Loading a DVD Map Disc

To load a DVD map disc, do the following:

1. Press the power/volume knob to turn the

system on.

2. Press and hold the eject key to tilt the

screen forward.

3. Insert the DVD map disc into the DVD slot.

Notice: Pressing directly on the navigation

screen may cause damage. Repairs would not

be covered by your warranty. Do not press

directly on the navigation screen.

4. To close the screen, slightly push up on the

two outer top corners until the screen is in

position, then push the screen in, by pushing

on the four outer corners, until you hear a click.

5. A notice may appear. Touch the Next screen

button to proceed.

Entering an Address, Point of Interest,

Home, and Preset Destinations

Before entering an Address, Point of Interest,

Home, or Preset Destination, select the

appropriate search area that contains the ﬁnal

destination. Your vehicle must be in PARK (P)

to perform this operation.

Setting the Search Area

To set the search area, do the following:

1. If a DVD map disc is not currently loaded,

see “Loading a DVD Map Disc” earlier in

this section. If a map disc is currently loaded,

proceed to Step 2.

2. Press the power/volume knob to turn the

system on.

3. Touch the Dest screen button.

4. Touch the Change screen button.

5. Touch the appropriate Search Area numbered

screen button that contains your ﬁnal

destination.

The system will return to the Destination menu.

9

Entering an Address

You can set a destination by entering an address.

To enter an address, do the following:

1. If a DVD map disc is not currently loaded,

see “Loading a DVD Map Disc” earlier in

this section. If a map disc is currently loaded,

proceed to Step 2.

2. Press the power/volume knob to turn the

system on.

3. Touch the Dest screen button.

4. Verify that the selected Search Area is correct.

5. Touch the Address screen button.

6. Enter the city name using the alpha keypad

on the screen.

7. Select the city name from the list by

touching the screen button next to the

correct city name.

8. Enter the street name using the alpha keypad

on the screen.

Do not enter directional information or street

type, and use the space symbol screen

button (

U ) between street or city names.

For example, the street name N. Royal Oak

Rd. should be entered as royal

U oak.

Use the backspace ( V ) screen button if

an incorrect character has been entered.

9. Select the desired street name from the list

by touching the screen button next to the

correct street name.

10. Enter the address number using the numeric

keypad on the screen. You may ﬁrst have to

select the correct range for the address

number, then enter the desired address and

touch the OK screen button. The map

screen will display.

11. Touch the Set Destination screen button.

The address entry is now complete.

12. Touch the Route screen button.

13. Touch the Start screen button.

14. Once you begin driving you will hear an audio

prompt to “Proceed to the highlighted route.”

You are now in route guidance mode.

10

Entering a Point of Interest (POI)

To set a destination by entering a Point of

Interest (POI), do the following:

1. If a DVD map disc is not currently loaded,

see “Loading a DVD Map Disc” earlier in

this section. If a map disc is currently loaded,

proceed to Step 2.

2. Press the power/volume knob to turn the

system on.

3. Touch the Dest screen button.

4. Verify that the selected Search Area is correct.

5. Touch the POI screen button.

6. Enter the speciﬁc title of the POI in the Name

space (i.e. Washington Monument) using the

alpha keypad on the screen.

• If there are POIs with the same name,

spell out the name and then touch the

List screen button (McDonald’s restaurant

vs. McDonald corporate office).

• Select the business desired.

• The system will list the POIs in alphabetical

order or, if there are multiple POIs with the

same name, the system will list the POIs

in order of distance from your location.

• Touch the screen button next to the address

of the POI desired.

7. Touch the Set Destination screen button.

The POI entry is now complete.

8. Touch the Route screen button.

9. Touch the Start screen button.

10. Once you begin driving you will hear an audio

prompt to “Proceed to the highlighted route.”

You are now in route guidance mode.

Using the Category or City selections will aid the

system in ﬁnding the POI by limiting the search

options.

11

Setting Home Destination

1. If a DVD map disc is not currently loaded,

see “Loading a DVD Map Disc” earlier in

this section. If a map disc is currently loaded,

proceed to Step 2.

2. Press the power/volume knob to turn the

system on.

3. Touch the Nav

y (navigation) menu screen

button.

4. Touch the Memory Points screen button.

5. Touch the Register Home screen button.

6. Touch the Address screen button and then

enter all address information.

7. Touch OK. The map screen will display.

8. Touch the Register Point screen button to

store the home address as a memory point.

The home symbol will now be available on the

Destination screen. See “Using Your Home

or Preset Destinations” later to use the home

destination as a planned route.

Setting Preset Destinations

1. If a DVD map disc is not currently loaded,

see “Loading a DVD Map Disc” earlier in

this section. If a map disc is currently loaded,

proceed to Step 2.

2. Press the power/volume knob to turn the

system on.

3. Touch the Nav

y (navigation) menu screen

button.

4. Touch the Memory Points screen button.

5. Touch the Register screen button under the

Preset Dest. column.

6. Touch one of the ﬁve preset buttons.

7. Touch the Address screen button and then

enter the address information.

8. Touch OK. The map screen will display.

9. Touch the Register Point screen button to

store the memory point.

The preset destination number will now be

available on the Destination screen. See

“Using Your Home or Preset Destinations” later

to use preset destinations as a planned route.

12

Using Your Home or Preset

Destinations

These destinations are available for selection

while driving.

1. If a DVD map disc is not currently loaded,

see “Loading a DVD Map Disc” earlier in

this section. If a map disc is currently loaded,

proceed to Step 2.

2. Press the power/volume knob to turn the

system on.

3. Touch the Dest screen button.

4. Touch the

L (Home symbol) or one of

the available Preset Destination symbols

at the bottom of the Destination screen.

The map screen will display.

5. If currently driving on a route, touch the

Set Destination screen button. The system

will calculate the new route. If you are

not currently driving on a route, the system

will automatically calculate a route to the

home or preset destination selected.

6. Touch the Route screen button.

7. Touch the Start screen button.

8. Once you begin driving, or if you are

already driving, you will hear an audio

prompt to “Proceed to the highlighted route.”

You are now in route guidance mode.

Canceling Guidance

Guidance will be canceled once you arrive at your

ﬁnal destination. To cancel guidance prior to

arrival at the ﬁnal destination, do the following:

1. From the map screen, touch the Nav Options

screen button.

2. Touch the Cancel Route screen button.

3. Touch the Yes screen button to conﬁrm

cancellation.

Cleaning the Video Screen

When cleaning the video screen, use only a soft

clean cotton cloth dampened with clean water.

13

✍ NOTES

14

Features and Controls .................................. 16

Using the Navigation System ....................... 16

Maps ........................................................... 20

Symbols ...................................................... 22

Navigation Menu ......................................... 23

Destination .................................................. 34

Colors on the Screen .................................. 49

Conﬁgure Menu ........................................... 50

Global Positioning System (GPS) ................ 53

Vehicle Positioning ...................................... 54

Problems with Route Guidance ................... 55

If the System Needs Service ....................... 55

Ordering Map DVDs .................................... 56

Database Coverage Explanations ................ 56

Section 2 Features and Controls

15

Features and Controls

Using the Navigation System

This section includes the basic information to

operate the navigation system.

The main navigation menu displays a number

of options which offer information on a variety

of topics. See Navigation Menu on page 23

for more information.

Use the hard keys located on the navigation

system along with the available touch-sensitive

screen buttons on the navigation screen to

operate the system.

Once the vehicle is moving, various functions

will be disabled to reduce driver distractions.

Hard Keys

The following hard keys are located to the left of

the navigation screen:

P / v (Power/Volume Knob): Press the

power/volume knob to turn the audio and

navigation system on and off. Turn the knob to

increase or decrease the volume to the audio

system.

NAV RPT (Navigation Repeat): Press the

NAV RPT key to repeat the current voice guidance

navigation prompt.

NAV (Navigation): If you are in a menu and

are not on the map screen, press the NAV key

to view the map showing your vehicle’s current

position.

If a route has not been planned, press this key

to display the map screen and the following

information:

• North or Heading Up symbol

• Time

• Map scale

16

If a route has been planned, press this key to

display the map screen and the following

information:

• Number of miles/kilometers between

current vehicle position and the destination.

See “Route Overview Menu” under

Destination on page 34 for more information.

• Estimated travel time to the destination.

See “Route Overview Menu” under

Destination on page 34 for more information.

• Highlighted route or turn-by-turn instructions.

See “Map Appearance” under Navigation

Menu on page 23 for more information.

You will ﬁnd more information on each feature

found on a map screen later in this manual.

BAND: Press the BAND key to access the BAND

screen and to switch between AM, FM1, FM2,

XM1, or XM2, if equipped. See “Finding a Station”

under Navigation Audio System on page 58.

x SEEK w: Press the SEEK up or down arrows

to go to the next or previous radio station or tracks

on a CD. See “Finding a Station” under Navigation

Audio System on page 58 or CD Player on page 66.

B (CD): Press the CD key to play a CD. The

CD screen will display. See CD Player on page 66.

e (Audio): Press the audio key to access the

Audio menu. See Navigation Audio System

on page 58.

CONFIG (Conﬁgure): Press the CONFIG key

to access the Conﬁgure menu. See Conﬁgure

Menu on page 50 for more information.

O (Tuning) Knob: Turn the tuning knob to go

to the next or previous frequency. See “Finding

a Station” under Navigation Audio System

on page 58.

X (Tilt Open/CD Eject) Key: Press the eject

key located next to the CD slot to eject a CD.

Press and hold the eject key to tilt the screen

forward to access the map DVD slot. See “Loading

a DVD Map Disc” under Getting Started on page 6

for more information on loading the map DVD.

X (DVD Eject) Key: Once the screen is tilted

forward, press this eject button to eject the

map DVD.

17

Alpha-Numeric Keypad

Letters of the alphabet, symbols, punctuation,

and numbers will display on the navigation screen

as an alpha or numeric keypad. The appropriate

keypad will automatically display whenever

the system needs information from you. The

alpha keypad will display when the system needs

input of a city or street name. The numeric

keypad will display when the system needs

input of a phone number or house address.

Touch a character on the screen to select it.

You may also touch the 0 - 9 screen button at

any time from the alpha keypad to access

the numeric keypad.

U (Space): Touch this screen button to

enter a space between characters or the words

of a name.

V (Backspace): Touch this screen button if

an incorrect character has been selected.

To make name selections easier, the system will

only allow you to select a character which can

follow the last one entered. For example, if a Z is

entered, a T will not be available to select. The

system will highlight the available characters.

If a name is not available after input, it may need

to be inputted differently, the map DVD database

may not contain that information, or the correct

search area has not been selected. See Database

Coverage Explanations on page 56.

Touch-Sensitive Screen Buttons

Touch-sensitive buttons, or screen buttons, are

located on the screen. After selecting a button on

the screen, a beep will sound. This feature can

be turned off. See Conﬁgure Menu on page 50

for more information. Screen buttons will be

highlighted when available. There are some

toggle screen buttons that will be light in color

when active.

18

The following touch-sensitive screen buttons will

appear frequently at the bottom of a map screen:

Dest (Destination): Touch this screen button

to display the Destination menu. See Destination

on page 34 for more information.

Nav (Navigation) Options: Touch this screen

button to display the Nav Options menu. See

“Navigation Options” under Destination on page 34

for more information.

Nav

y (Navigation Menu): Touch this screen

button to display the main navigation menu.

See Navigation Menu on page 23 for more

information.

V (Zoom In): Touch this screen button to get

a closer look at a smaller section of the route you

are traveling.

U (Zoom Out): Touch this screen button to

see a larger scale of the route you are traveling.

You can also view your highlighted route.

Clock: Touch the clock screen button, when the

radio is on, to display the date.

Audio Source: Touch the audio source screen

button, while a map screen is displayed, to access

the Audio screen.

Back: Touch this screen button, when available

on a menu, to return to the previous screen.

19

Maps

This section includes basic information about

the map database.

The maps are stored on a DVD-ROM. The

48 contiguous United States, Hawaii, and Canada

are contained on one disc. The map database

includes interstate freeways, state highways,

country roads, and major and general streets.

Refer to the “Navigation System Map Disc” manual

to view the explanation of map coverage. The map

disc manual will be in the map DVD case when

the vehicle is delivered from the factory.

Installing the DVD Map Disc

Your dealer may have installed the map DVD.

If the DVD was not installed, do the following:

1. Turn the ignition on.

2. Press and hold the eject key to tilt the

screen forward.

3. Load the map DVD into the DVD slot by

inserting it partway. The system will pull it in.

Notice: Pressing directly on the navigation

screen may cause damage. Repairs would not

be covered by your warranty. Do not press

directly on the navigation screen.

4. To close the screen, slightly push up on the

two outer top corners until the screen is in

position, then push the screen in, by pushing

on the four outer corners, until you hear

a click.

Once the screen is closed, you will have the

following two language choices:

• ENG (English)

• FR (French)

Select the language at this time. See “Language”

under Conﬁgure Menu on page 50 for more

information. Once a language has been selected,

touch the NEXT screen button to plan a route.

The map will appear showing your current vehicle

position.

20

Page is loading ...

Hummer H3 2007 Owner's manual

This manual is also suitable for

Hummer H3 2007 Owner's manual

Related papers