Trendnet TEG-2248WS Quick Installation Guide

Category
Network switches
Type
Quick Installation Guide

This manual is also suitable for

Trendnet TEG-2248WS is a powerful and versatile 48-port 10/100Mbps Web Smart Switch with 4 Gigabit ports and 2 Mini-GBIC slots, providing a reliable and high-performance networking solution for small and medium-sized businesses. With its advanced features, it offers enhanced network management, security, and flexibility.

Trendnet TEG-2248WS is a powerful and versatile 48-port 10/100Mbps Web Smart Switch with 4 Gigabit ports and 2 Mini-GBIC slots, providing a reliable and high-performance networking solution for small and medium-sized businesses. With its advanced features, it offers enhanced network management, security, and flexibility.

48-Port 10/100Mbps Web Smart Switch
w/4 Gigabit Ports and 2 Mini-GBIC Slots
TEG-2248WS
3.02
ŸQuick Installation Guide (1)
1
Minimum Requirements
Package Contents
If any of the above contents are missing, please contact your reseller.
1. Before You Start
Ÿ
Ÿ
Ÿ
Web Browser: Internet Explorer (6.0 or above)
Computer with network adapter installed
Cat. 5, Cat. 5e, Cat. 6 RJ-45 network cable
ŸTEG-2248WS
ŸMulti-Language Quick Installation Guide
ŸCD-ROM (Utility and User Guide)
ŸPower Cord
ŸRack Mount Kit
Optional Equipment
Ÿ
Ÿ
Standard 19” Rack
Mini-GBIC Modules (e.g. TEG-MGBSX, TEG-MGBS10, TEG-MGBS40,
TEG-MGBS80, TEG-MGBS10D35, TEG-MGBS40D35)
2. Hardware Installation
2. Hardware Installation
1. Connect the Power Cord to the rear socket of the TEG-2248WS and then to a
power outlet.
2
For more information regarding the Web Smart Switch Management Utility
configuration and advanced settings, please refer to the User's Guide included
on the provided CD-ROM or TRENDnet's website at www.trendnet.com
2. Connect a network cable from the computer to an available Ethernet
port of the TEG-2248WS.
Note:
1. After hardware installation is complete, use the Web Smart Switch
Management Utility to configure the TEG-2248WS. To access the Web Smart
Switch Management Utility, open your web browser, and enter the default IP
Addr
configured to the same network
segment.
2. The Mini-GBIC slots are shared with Gigabit Ethernet ports 49 and 50. When
the Mini-GBIC slots are in use, Gigabit Ethernet ports 49 and 50 are disabled.
3. If you would like to easily discover all the Web Management Switches on the
network, assign IP Address, change the password, and upgrade new
firmware, then install the Web Smart Switch Management Utility. Follow the
steps provided on the user's guide.
ess http://192.168.0.1 and default password "admin". Make sure your
computer and the TEG-2248WS are
48-Port 10/100Mbps Web Smart Switch w/4 Gigabit Ports and 2 Mini-GBIC Slots
TRENDnet
20675 Manhattan Place
Torrance, CA 90501. USA
Copyright ©2011. All Rights Reserved. TRENDnet.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5

Trendnet TEG-2248WS Quick Installation Guide

Category
Network switches
Type
Quick Installation Guide
This manual is also suitable for

Trendnet TEG-2248WS is a powerful and versatile 48-port 10/100Mbps Web Smart Switch with 4 Gigabit ports and 2 Mini-GBIC slots, providing a reliable and high-performance networking solution for small and medium-sized businesses. With its advanced features, it offers enhanced network management, security, and flexibility.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI