Micro Center Atari Games User guide

Brand: Micro Center

Model: Atari Games

Type: User guide

This manual is also suitable for

Inland Atari Games for Raspberry Pi 32GB Micro SD Card Preloaded Over 100 Classic Atari Games Compatible

Micro Center Inland Atari Games for Raspberry Pi 32GB Micro SD Card grants you access to over 100 classic Atari games, including several from the Atari 5200 library. Compatible with Raspberry Pi, this micro SD card offers a hassle-free installation process that allows for easy updates and reinstallation of the image if needed. By simply holding the shift key during boot-up and selecting the desired image from the list, you can effortlessly install the latest RetroPie image and enjoy a wide range of Atari titles.

9/30/2020 Installing the latest RetroPie image with the Atari Games Card — Micro Center

https://community.microcenter.com/discussion/4108/installing-the-latest-retropie-image-with-the-atari-games-card 1/4

HOME RETRO ARCADE/GAMING

Installing the latest RetroPie

image with the Atari Games

Card

›

NickBiederman admin 

July 28 edited September 8

A new Atari game image for ourAtari Games SD

cardandAtari Raspberry Pi Kitwent live this week, so those

of you who have already built a system with our card can

now install the new image. This particular image adds

about 30 new games, including several from the Atari 5200

library. As future updates become available they can be

installed using the same method. This process can also be

used to reinstall the image if you need to reset all your

settings or the image becomes corrupt.

Power down your arcade and plug in a keyboard and

mouse. Turn the arcade back on and hold shift when this

screen appears:

After the system initializes into recovery mode, you’ll see a

list of available images like the one below:

9/30/2020 Installing the latest RetroPie image with the Atari Games Card — Micro Center

https://community.microcenter.com/discussion/4108/installing-the-latest-retropie-image-with-the-atari-games-card 2/4

Select the image you would like to install and click “Install”.

You’ll get a warning about overwriting existing OSs. Select

Yes and the installation will begin.

You’ll see the installation window next, which will download

and install the new image. This can take a bit of time,

especially if you have a slower internet connection.

9/30/2020 Installing the latest RetroPie image with the Atari Games Card — Micro Center

https://community.microcenter.com/discussion/4108/installing-the-latest-retropie-image-with-the-atari-games-card 3/4

Once the installation is complete click the OK button. The

system will automatically boot to Emulation Station and

you’ll be greeted by a new category for Atari 5200.

9/30/2020 Installing the latest RetroPie image with the Atari Games Card — Micro Center

https://community.microcenter.com/discussion/4108/installing-the-latest-retropie-image-with-the-atari-games-card 4/4

Installing the new image took me about 15 minutes.

Downloading the new image is the most time consuming

part, so the total time can vary depending on the speed of

your internet connection.

Micro Center Atari Games User guide

Brand: Micro Center

Model: Atari Games

Type: User guide

This manual is also suitable for

Inland Atari Games for Raspberry Pi 32GB Micro SD Card Preloaded Over 100 Classic Atari Games Compatible

Download PDF

report

Micro Center Atari Games User guide

This manual is also suitable for

Micro Center Atari Games User guide

Other documents