9/30/2020 Installing the latest RetroPie image with the Atari Games Card — Micro Center
https://community.microcenter.com/discussion/4108/installing-the-latest-retropie-image-with-the-atari-games-card 1/4
HOME RETRO ARCADE/GAMING
Installing the latest RetroPie
image with the Atari Games
Card
›
NickBiederman admin
July 28 edited September 8
A new Atari game image for ourAtari Games SD
cardandAtari Raspberry Pi Kitwent live this week, so those
of you who have already built a system with our card can
now install the new image. This particular image adds
about 30 new games, including several from the Atari 5200
library. As future updates become available they can be
installed using the same method. This process can also be
used to reinstall the image if you need to reset all your
settings or the image becomes corrupt.
Power down your arcade and plug in a keyboard and
mouse. Turn the arcade back on and hold shift when this
screen appears:
After the system initializes into recovery mode, you’ll see a
list of available images like the one below:
9/30/2020 Installing the latest RetroPie image with the Atari Games Card — Micro Center
https://community.microcenter.com/discussion/4108/installing-the-latest-retropie-image-with-the-atari-games-card 2/4
Select the image you would like to install and click “Install”.
You’ll get a warning about overwriting existing OSs. Select
Yes and the installation will begin.
You’ll see the installation window next, which will download
and install the new image. This can take a bit of time,
especially if you have a slower internet connection.
9/30/2020 Installing the latest RetroPie image with the Atari Games Card — Micro Center
https://community.microcenter.com/discussion/4108/installing-the-latest-retropie-image-with-the-atari-games-card 3/4
Once the installation is complete click the OK button. The
system will automatically boot to Emulation Station and
you’ll be greeted by a new category for Atari 5200.
9/30/2020 Installing the latest RetroPie image with the Atari Games Card — Micro Center
https://community.microcenter.com/discussion/4108/installing-the-latest-retropie-image-with-the-atari-games-card 4/4
Installing the new image took me about 15 minutes.
Downloading the new image is the most time consuming
part, so the total time can vary depending on the speed of
your internet connection.
-
1
-
2
-
3
-
4
INLAND Inland Atari Games for Raspberry Pi 32GB Micro SD Card Preloaded Over 100 Classic Atari Games Compatible User guide
- Type
- User guide
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Other documents
-
Atari Harmony User manual
-
Wico Command Control Installation guide
-
-
-
-
-
ARCADE1UP 815221026889 User manual
-
Sharper Image Redline GT Racing Simulator Owner's manual
-
WF Tastemakers Trading Limited 815221026940 Owner's manual
-
Mattel SPACE INVADERS 74064 User manual
