VXDAS VXDAS NT510 OBD2 Scanner Enhanced OBDII Code Reader Installation guide

NOTE: If the above device driver is not successfully installed, the solutions are as follows:

1. Click the following installation package “ VCP_V1.4.0 Setup ” and install it accroiding to the instructions.

(Also get it on

https://www.humzor.com/pages/download）

2. After completion, copy the two files into specified folder



Copy mdmcpq.inf to c:\windows\inf



Copy usbser.sys to c:\windows\system32\drivers

Tips: For example, to open c:\windows\inf, just input “c:\windows\inf ” in the address bar (the address bar of the IE input

URL is the same as the address bar in My Computer).