AntMiner AntMiner S9 13.5TH/s User manual

Brand: AntMiner

Model: AntMiner S9 13.5TH/s

Type: User manual

This manual is also suitable for

S9 Server Installation

Guide

Document Version 0.1

Jan 2017

Bit

maintech Pte.Ltd. (Bitmain) reserves the right to make corrections, modifications, enhancements,

improvements, and other changes to its products and services at any time and to discontinue any product or

service without notice.

Customers should obtain the latest relevant information before placing orders and should verify that such

information is current and complete. All products are sold subject to Bitmain's terms and conditions of

sale supplied at the time of order acknowledgment.

Bitmain warrants performance of its products to the specifications applicable at the time of sale in accordance

with Bitmain's standard warranty. Testing and other quality control techniques are used to the extent Bitmain

deems necessary to support this warranty. Except where mandated by government requirements, testing of all

parameters of each product is not necessarily performed.

‐

S9 Server Installation Guide

Bitmain assumes no lia

bility for third‐party applications assistance. Customers are responsible for their

products and applications using Bitmain components. To minimize the risks associated with customer products

and applications, customers should provide adequate design and operatingsafeguards.

Bitmain does not warrant or represent that any license, either express or implied, is granted under any Bitmain

patent right, copyright or other Bitmain intellectual property right relating to any combination, machine, or

process in which Bitmain products or services are used. Information published by Bitmain regarding third‐party

products or services does not constitute a license from Bitmain to use such products or services or a warranty

or endorsement thereof. Use of such information may require a license from a third party under the patents or

other intellectual property of the third party, or a license from Bitmain under the patents or other intellectual

property of Bitmain.

Resale of Bitmain products or services with statements different from or beyond the parameters stated by

Bitmain for that product or service voids all express and any implied warranties for the associated Bitmain

product or service and is an unfair and deceptive business practice. Bitmain is not responsible or liable for any

such statements.

All company and brand products and service names are trademarks or registered trademarks of their

respective holders.

All text and figures included in this publication are the exclusive property of Bitmaintech Pte.Ltd.(Bitmain),

and may not be copied, reproduced, or used in any way without the express written permission of Bitmain.

Information in this document is subject to change without notice and does not represent a

commitment on the part of Bitmain. Although the information in this document has been carefully reviewed,

Bitmain does not warrant it to be free of errors or omissions. Bitmain reserves the right to make corrections,

updates, revisions or changes to the information in this document.

Bitmaintech Pte.Ltd.

Tel: +86‐400‐890‐8855

www.bitmain.com

‐

S9 Server Installation Guide

Table of Contents

1.Overview 4

1.1 S9 Server Components

1.2 Specifications

2.Connecting the Power Supply

3.Setting Up the Server

4.Configuring the Server

.Monitoring Your Server5

6.AdministeringYourServer

6.1 Checking Your Firmware Version

6.2 Upgrading Your System

6.3 Modifying Your Pass word

6.4 Restoring Initial Settings

‐

S9 Server Installation Guide

1.Overview.

1. Overview

The S9 server is Bitmain’s newest version in the S9 server series. It boasts a stat

e‐of‐the‐art BM1387

custom‐made chip using 16nm technology. All S9 servers are tested and configured prior to shipping to

ensure easy set up.

You must provide your own ATX power supply.

‐

S9 Server Installation Guide

1.Overview.

1.1 S9 Server Components

The S9 Server main components and controller front panel are shown in the following figure:

‐

S9 Server Installation Guide

1.Overview

1.2 Specifications

Feature

Description

Hash Rate

12±

5%Th/s

12.5±

5%Th/s

13±

5%Th/s

13.5±

5%Th/s

Estimated wall outlet power consumption

(with APW3, 93% efficiency, 25°C ambient

temperature)

1176W+10% 1225W+10% 1274W+10% 1323W+10%

Rated voltage

11.60~13.00V

Estimated wall outlet power efficiency

(with APW3, 93% efficiency, 25°C ambient

temperature)

0098J/GH+10%

Dimensions (L x W x H)

350mm x 135mm x 158mm

Net weight

4.2kg

Operating ambient temperature

0-40°C

The server does not contain a DC/DC converter; therefore, higher input voltage will cause higher

Mining efficiency .

‐

S9 Server Installation Guide

2. Connecting the Power Supply

Ten PCI‐e connectors are located at the top of the S9 server for connecting the PSU as follows:

● Nine PCI‐e connectors for the hash boards. Each hash board has a set of three PCI‐e connectors.

●

One PCI‐e connector located on the controller.

Each hashboard must be powered by the same PSU to prevent possible damage and instability.

To connect the power supply:

1. Connect PSU power cable connectors to each of the nine PCI‐e connectors onthetopofthe S9server,

ensuring that each hash board is powered by the same PSU.

2. Connect a PSU power cable connector to the S9 PCI‐e connector on the controller.

3. Connect the network cable to the ETH port.

4. To power up your S9 server, connect the PSUs to the power wall outlet.

If you are using more than one PSU,power up the PSU connected to the controller AFTER you have

Powered up the other PSU(s).

‐

S9 Server Installation Guide

2. Connecting the Power Supply

Figure 2‐1. PCI‐E Connectors ‐ Correct Connection

Figure 2‐2. PCI‐E Connectors ‐ Incorrect Connection

‐

S9 Server Installation Guide

3. Setting Up the Server

To set up the server:

ThefileIPReporter.zipissupportedbyMicrosoftWindowsonly.

1. Go to the following site:

https://shop.bitmain.com/support.htm?pid=00720160906053730999PVD2K0vz0693

2. Download the following file: IPReporter.zip

3. Extract the file.

The default DHCP network protocol distributes IP addresses automatically.

4. Right‐click IPReporter.exe and run it as Administrator.

5. Select one of the following options:

■

Shelf, Step, Position – suitable for farm servers to mark the location of theservers.

■

Default – suitable for home servers.

6. Click Start.

‐

S9 Server Installation Guide

3. Setting Up the Server

7. On the controller board, click the IP Report button. Hold it down until it beeps (about 5 seconds).

The IP address will be displayed in a window on your computer screen.

8. In your web browser, enter the IP address provided.

9. Proceed to login using

root

for both the username and password.

10. In the Network section, you can assign a Static IP address (optional).

11. Click Save & Apply.

‐

S9 Server Installation Guide

4. Configuring the Server

Setting Up the Pool

To configure the server:

1. Click General Settings.

2. Set the options according to the following table:

Option Description

Pool URL Enter the URL of your desired pool.

The S9 server can be set up with three mining pools, with decreasing priority

from the first pool (pool 1) to the third pool (pool 3).

The pools with low priority will only be used if all higher priority pools are

offline.

Worker Your worker ID on the selected pool.

Password The password for your selected worker.

3. Click Sa

ve & Apply to save and restart the server.

‐

S9 Server Installation Guide

5. Monitoring Your Server

To check the operating status of your server:

1. Click the status marked below.

2. Monitor your server according to the descriptions in the following table:

Option Description

ASIC# Number of chips detected in the chain.

Frequency ASIC frequency setting.

GH/S(RT) Hash rate of each hash board ( GH/s)

Temp(PCB) Temperature of each hash board (°C).(Applied only to server with fixed frequency)

Temp(Chip) Temperature of the chips on each hash board (°C).

ASIC status One of the following statuses will appear:

● O ‐ indicates OK

●

X ‐ indicates error

●

‐ ‐ indicates dead

‐

S9 Server Installation Guide

6. Administering Your Server

6.1 Checking Your Firmware Version

To check your firmware version:

1. In System, click the Overview tab.

2. File System Version displays the date of the firmware your server use. In the example below, the server is

using firmware version 20170108.

6.2 Upgrading Your System

Make sure that the S9 server remains powered during the upgrade process. If power fails before

the upgrade is completed, you will need to return it to Bitmain for repair.

To upgrade the server’s firmware:

1. In System, click Upgrade.

S9 Server Installation Guide

‐ 14 ‐

AntMiner AntMiner S9 13.5TH/s User manual

Brand: AntMiner

Model: AntMiner S9 13.5TH/s

Type: User manual

This manual is also suitable for

Download PDF

report

AntMiner AntMiner S9 13.5TH/s User manual

This manual is also suitable for

AntMiner AntMiner S9 13.5TH/s User manual

Related papers

Other documents