Stardom ST2-SB3F User manual

ST2-SB3F
Stardom
Brand
Stardom
Model
ST2-SB3F
Type
User manual

Stardom ST2-SB3F is an eSATA to FireWire 800 Adapter that allows you to connect external storage devices with either eSATA or FireWire 800 ports to your computer. It supports data transfer speeds of up to 800 Mbps and is compatible with both PC and Mac computers.

The S2F Adapter is hot-swappable, which means you can connect and disconnect devices without having to turn off your computer. It also supports RAID configurations, allowing you to create redundant storage arrays for increased data protection.

Stardom ST2-SB3F is an eSATA to FireWire 800 Adapter that allows you to connect external storage devices with either eSATA or FireWire 800 ports to your computer. It supports data transfer speeds of up to 800 Mbps and is compatible with both PC and Mac computers.

The S2F Adapter is hot-swappable, which means you can connect and disconnect devices without having to turn off your computer. It also supports RAID configurations, allowing you to create redundant storage arrays for increased data protection.

FireWire 800 (1394b) Port eSATA Port
S2F Adapter Device x1
v1.0 (MAY. 2015)
FireWire 800 Cable x1
eSATA Cable x1
Quick Installation
Guide x1
Please contact to the supplier if the product, parts, and its packaging are
in short or damaged.
Indicator
Product Diagrams and the Contents of Product Package
eSATA to FireWire 800 Adapter
S2F Hardware Installtion
1. Please connect S2F to Host and the external Storage Device(s).
1.1 FW800 cable is to connect S2F and Host or S2F to the external Storage Device.
1.2 eSATA cable is to connect S2F to the external Storage Device.
1. The Host can only connect S2F thru FW800 Port.
3. Please do not remove any cable to avoid data loss during data transferring.
4. S2F only supports the external Storage Device with RAID features and single-bay
enclosure, it doesn't support any miltiple bays Storage Device with only JBOD feature.
5. S2F offers Hot-swappable feature, Host and the Storage Device will stay working
even if any of the cables is disconnected.
6. S2F Adapter is only to support data transfer purpose in between Host (FW800) and
the external Storage Device(s) (eSATA or/and FW800) ports with no data protection
feature, Stardom will not be responsible for any data loss liability.
2. In order to assure the data transfer quality, please only use the bundled cables.
FireWire Port
(to connect Host or
to the Storage Device)
PC/Mac
eSATA Port
(to connect
to Storage Device)
The External Storage Device The External Storage Device
LED Instruction
Purple Light changes
to Blue Light
Flashing Blue
Solid Purple
Solid Purple
Solid Purple
Status
S2F connects to Host thru FireWire 800 port (FW800)
Host connects to S2F, and S2F connects to
the external Storage Device
Data transferring, Connect to Storage Device thru
eSATA port.
Host connects to S2F thru FW800, and S2F connects
to the external Storage Device thru FW800.
Data transferring, Connect to Storage Device thru
Firewire port.
S2F Adapter-Quick Installation Guide
After you open the outer package, make sure that the following items are
contained in the package:
Contents of Product Package
LED Instruction
Hardware Installation
Important Notice
Thank you for choosing product from RAIDON Technology lnc. This information
in the manual has been thoroughly checked before publication, but may not conform
to the product catually delivered which mean actual product specifications depend
on the product shipped to you. Any update in the specifications or product-related
information shall not be subject to further notice but for the latest information on the
product, please visit the website as www.STARDOM.com.tw or contact us at
ser[email protected] , and we will get back to you as soon as possible.
  • Page 1 1

Stardom ST2-SB3F User manual

ST2-SB3F
Stardom
Brand
Stardom
Model
ST2-SB3F
Type
User manual

Stardom ST2-SB3F is an eSATA to FireWire 800 Adapter that allows you to connect external storage devices with either eSATA or FireWire 800 ports to your computer. It supports data transfer speeds of up to 800 Mbps and is compatible with both PC and Mac computers.

The S2F Adapter is hot-swappable, which means you can connect and disconnect devices without having to turn off your computer. It also supports RAID configurations, allowing you to create redundant storage arrays for increased data protection.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents