Motorola RMM2050 User manual

Type
User manual

This manual is also suitable for

QUICK REFERENCE
GUIDE FOR
RADIO FEATURES
RM SERIES
BUILT TOUGH
TO DO
BUSINESS
BETTER
MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC and are used under license.
All other trademarks are the property of their respective owners. © 2013 Motorola Solutions, Inc. All rights reserved. Specifications are subject to change without notice. All specifications
shown are typical.
RM Series
Select your model by
clicking over the image
RMU2040
RMU2043
RMU2050 RMU2080 RMU2080d RMV2080
RMU2040
QUICK REFERENCE GUIDE
1. DEFAULT VALUES
2. MODEL FEATURES
3. FACTORY DEFAULT
4. DISABLE TONES
5. IVOX
6. VOX
7. CHANNEL ANNOUNCEMENT
8. POWER UP AUDIO
9. ADVANCED CONFIGURATION
RMU2040
Power Up Audio:
Battery level +
Channel
PTT (Push-to-Talk)
Button
SB1 Monitor Button
SB2 Channel Down
RMU2040
DEFAULT VALUES
Channel Voice Prompt: On
Active Channels: 2
Battery Save: On
CHAN FREQ CODE
1 2 - 464.5500 1 67.0 Hz
2 8 - 467.9250 1 67.0 Hz
3* 5 - 467.8500 1 67.0 Hz
4* 6 - 467.8750 1 67.0 Hz
*When channels are enabled
Rugged Speaker Grill
Microphone
Antenna
On/Off Volume Knob
LED Indicator
Accessory
Connector
Lithium Ion
Battery
PTT (Push-to-Talk)
Button
SB1 Monitor Button
SB2 Channel Select
RM SERIES
NON-DISPLAY RADIO FEATURES
Applies to
RMU2040 / RMU2043 / RMM2050
PTT (Push-to-Talk)
Button
SB1 Monitor Button
SB2 Channel Select
RM SERIES
Factory Settings Reset
On/Off
Volume Knob
To reset radio to
Factory default
settings, Power up
with SB1, SB2 &
PTT pressed at the
same time.
Please note that all
channels will revert to
default frequencies.
Applies to
RMU2040 / RMU2043 / RMM2050
On/Off
Volume Knob
SB2 Channel Select
RM SERIES
Toggle (Disable/Enable) Keypad tones
To disable/enable
keypad tones,
power up with SB2
button pressed
Applies to
RMU2040 / RMU2043 / RMM2050
On/Off
Volume Knob
PTT (Push-to-Talk)
Button
RM SERIES
IVOX hands free
To enable the IVOX
Power up with PTT
pressed .
Applies to
RMU2040 / RMU2043 / RMM2050
3) On/Off
Volume Knob
2) Attach
VOX
accessory
RM SERIES
External VOX hands free
Applies to
RMU2040 / RMU2043 / RMM2050
To enable voice activated
(VOX) accessories,
1. Use the Customer
Programming Software
(CPS) to change the Vox
Level of the radio
2. Attach a VOX supported
accessory
3. Power up with VOX
accessory attached
SB1 Monitor Button
RM SERIES
Channel Voice Annunciation
To enable/disable the Channel
Voice announcement, power
up pressing SB1 button
On/Off
Volume Knob
Applies to
RMU2040 / RMU2043 / RMM2050
On/Off
Volume Knob
SB1 Monitor Button
SB2 Channel Select
RM SERIES
Power up Audio Announcement
To cycle through the Power
up Audio Announcement
options power the radio while
pressing SB1 + SB2 at the
same time.
OPTIONS:
1. Battery level + Channel #
2. Channel #
3. Silent
Applies to
RMU2040 / RMU2043 / RMM2050
PTT (Push-to-Talk)
Button
SB1 Monitor Button
RM SERIES
Advanced Configuration
To enter the
Advanced
Configuration menu,
power up pressing
PTT + SB1 button
On/Off
Volume Knob
Applies to
RMU2040 / RMU2043 / RMM2050
RM SERIES
Advanced Configuration
1) The radio
provides voice
feedback of the
mode entered
Frequency
Code
Auto Scan
Active
Channel
PTT (Push-to-Talk)
Button
2) Press PTT to
cycle through the
Advanced
Configuration
Menu options
“Programming
Mode,
Channel 1”
CH 1
Applies to
RMU2040 / RMU2043 / RMM2050
CH 1
RM SERIES
Advanced Configuration
Select from the list
of pre-programmed
frequencies
“Frequency x,
To change
press side
button 1 or 2”
SB1 Monitor Button
SB2 Channel Select
Frequency
Code
Auto Scan
Active
Channel
Applies to
RMU2040 / RMU2043 / RMM2050
CH 1
RM SERIES
Advanced Configuration
1) Press PTT to cycle
through to the Code
Menu
2) Select from the list
of pre-programmed
codes
“Code x, To
change press
side button 1
or 2”
SB1 Monitor Button
SB2 Channel Select
Frequency
Code
Auto Scan
Active
Channel
Applies to
RMU2040 / RMU2043 / RMM2050
CH 1
RM SERIES
Advanced Configuration
1) Press PTT to cycle
through to the Auto
Scan menu
2) Enable / disable by
pressing SB1 or
SB2
“Auto Scan
Disabled, To
change press
side button 1 or
2”
SB1 Monitor Button
SB2 Channel Select
Frequency
Code
Auto Scan
Active
Channel
Applies to
RMU2040 / RMU2043 / RMM2050
CH 1
RM SERIES
Advanced Configuration
1) Press PTT to cycle
through to the
Active Channel
menu
2) Add / remove
channels by
pressing SB1 or
SB2
“Active Channels
2, To change
press side
button 1 or 2”
SB1 Monitor Button
SB2 Channel Select
Frequency
Code
Auto Scan
Active
Channel
Applies to
RMU2040 / RMU2043 / RMM2050
RM SERIES
Advanced Configuration
Frequency
Code
Auto Scan
Active
Channel
PTT (Push-to-Talk)
Button
1) Press PTT to cycle
through the Advanced
Configuration Menu until
you hear the channel
number
2) Select another channel to
configure by pressing SB1
or SB2
“Channel 1”
CH 2
3) Press PTT to
cycle through the
Advanced
Configuration
Menu options for
Channel 2
Applies to
RMU2040 / RMU2043 / RMM2050
RM SERIES
Advanced Configuration
2) PTT (Push-to-Talk)
Button
To exit Advanced Configuration
you can:
1) Power cycle the radio.
Or
2) Press and hold PTT until you
cycle back to top of
programming menu and hear
a ‘beep” then press and hold
PTT until you hear Power up
Audio
“Battery level
high, Channel 1”
Applies to
RMU2040 / RMU2043 / RMM2050
1) Power button
RM SERIES
BUILT TOUGH
TO DO
BUSINESS
BETTER
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117

Motorola RMM2050 User manual

Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI