†
Check local codes for required breaker size.
Note: Cabinets installed adjacent to wall ovens
must have an adhesion spec of at least 194°
temperature rating.
Installation information: Before installing, consult
installation instructions packed with product for
current dimensional data.
Dimensions and Installation Information (in inches)
For answers to your Monogram,
®
GE Profile
™
or
GE
®
appliance questions, visit our website at
ge.com or call GE Answer Center
®
service,
800.626.2000.
JRP28BJ
GE
®
24" Built-In Double Wall Oven
KW Rating
240V
7.1
208V
5.3
Breaker Size
30 Amps
†
Listed by
Underwriters
Laboratories
All GE ranges are equipped with
an Anti-Tip device. The installation
of this device is an important,
required step in the installation
of the range.
Specification Revised 7/05
320308
10
Locate
junction box
5" MIN.
below cutout
floor or 44"
MIN. above
cutout floor
Allow 3/4"
for overlap
over all edges
of cutout
24
Minimum
cutout location
from floor
48-1/8
Min.
14
2" X 4" or
equiv. runners
(cutout floor)
21" MIN.
door opening
allowance
23-1/2
22-1/2
23-3/4
23-1/8
48-1/8 w/out trim
49-1/4 with trim
Locate
junction box
56" MIN. above
cutout floor
Conduit
(48-1/2" Long)
21
C
L
2 x 4 or
equivalent
runners
Suitable
bracing
to support
runners
11"
over centerline
of cabinet