Delfield 4427N Datasheet

Delfield
Brand
Delfield
Model
4427N
Type
Datasheet

This manual is also suitable for

Delfield 4427N is a single section refrigerator with a door that is 100% front breathing, allowing it to be pushed against a wall or built into a cabinet or an existing line up. It features durable, rugged stainless steel sides, top and front and has an exclusive ABS interior that is extremely durable and will not dent, chip or corrode. The heavy duty self-closing hinges and 10-year warranty on the drawer system's track assembly ensure longevity. The environmentally friendly R404A refrigerant and high density foamed in place polyurethane insulation keep energy costs low.

Delfield 4427N is a single section refrigerator with a door that is 100% front breathing, allowing it to be pushed against a wall or built into a cabinet or an existing line up. It features durable, rugged stainless steel sides, top and front and has an exclusive ABS interior that is extremely durable and will not dent, chip or corrode. The heavy duty self-closing hinges and 10-year warranty on the drawer system's track assembly ensure longevity. The environmentally friendly R404A refrigerant and high density foamed in place polyurethane insulation keep energy costs low.

Project __________________________________
Item ____________________________________
Quantity ________________________________
CSI Section 11400
Approved _______________________________
Date ____________________________________
980 S. Isabella Rd.
Mt. Pleasant, Michigan 48858
Phone: 800-733-8948 or 989-773-7981
Fax: 800-669-0619
www.delfield.com
Exterior top is one-piece, 22-gauge stainless steel with
integral 2.12” (5.4cm) square nosing on the front.
Exterior back and bottom are two-piece 24-gauge galvanized
steel. Exterior ends are stainless steel.
Interior sides are thermoformed ABS plastic with shelves
supported on plugs. Interior back is one-piece 22-gauge
stainless steel. Interior bottoms are thermofoamed ABS
plastic. Base is fully insulated with high-density foamed in
place environmentally friendly, Kyoto Protocol Compliant, Non
ODP (Ozone Depletion Potential), Non GWP (Global Warming
Potential) polyurethane.
Refrigeration system uses HFC-404A refrigerant. Compressor
is 1/5 H.P., with condenser coil and hot gas condensate
evaporator mounted on rear of the cabinet. Evaporator coil
is located on the interior rear wall of the cabinet. Refrigerant
flow is controlled by a capillary tube. Cabinet maintains an
interior cabinet temperature of 36°F to 40°F (2°C to 4°C).
ACT electronic, solid state control, mounted at the rear of
the cabinet, allows the unit to maintain precise temperatures
in heavy duty conditions.
Electrical connection is 115 volt, 60 Hertz, single phase. Unit
has a 6’ (1.8m) long electrical cord and NEMA 5-15P plug.
Casters: Equipment is mounted on 5” (13cm) diameter plate
casters with front two locking. Equipment clearance above the
floor is 2.5” (6cm).
Door has a 24-gauge stainless steel exterior, with thermoformed
ABS plastic interior liner.
Drawers have 24-gauge stainless steel exterior with
thermoformed ABS plastic interior liner. Drawer frames are
12-gauge stainless steel. Drawer slides are 11-gauge stainless
steel with Delrin bearings. Top drawer holds one full size 12” x
20”, 4”-6" (30.5cm x 50.8cm x 10.2cm) deep pan, and three 1/6
size pans. Bottom drawer holds one full size 12 x 20" and three
1/6 size 4" deep pans. Pans are supplied by others.
Specifications
Standard Features
Options &
Accessories
• All 4400 and 4500 Series units are 100% front
breathing, which allows the unit to be pushed
against a wall or built into a cabinet or an
existing line up
• Durable, rugged stainless steel sides, top and
front
• Features Delfield’s exclusive ABS interior (on
sides). ABS is extremely durable - it won’t dent,
chip or corrode and is backed by a limited
lifetime warranty
• Heavy duty self-closing hinges
• “D” prefix models feature Delfield’s exclusive
new drawer system. Drawers are backed by a
10-year warranty on the track assembly
• Environmentally friendly R404A refrigerant
• High density foamed in place environmentally
friendly, Kyoto Protocol Compliant, Non ODP
(Ozone Depletion Potential), Non GWP (Global
Warming Potential) polyurethane keeps energy
costs low
• Black recessed quick grip handle
• Standard on 5” casters for easy cleaning and
installation
• 60-cycle single phase electrical system
• 4427N Single section refrigerator with door
• D4427N Single section refrigerator with drawers
Models
4427N Flat Top
Front-Breathing Self-Contained Flat Top Refrigerated
Bases
4427N Flat Top: Front-Breathing Self-Contained Flat Top Refrigerated Bases
• 6’ cord and plug supplied
• One epoxy coated wire shelf standard,
installed per door section
• ACT solid state electronic control
• One year parts and 90 day labor
standard warranty
• 18” wide single tier overshelf
• Stainless steel finish on back
• Plastic laminate on front
• Additional wire shelves
• 3” casters, 3.75” ride height
• Door lock (solid door models only)
• Exterior thermometer (solid door
models only)
• Interior lights
• Glass door(s)
• 220V/50 Hertz electrical system*
* Inclusion of this option will alter
electrical specifications of the unit
D4427N
Only
Model 4427N
980 S. Isabella Rd.
Mt. Pleasant, Michigan 48858
Phone: 800-733-8948 or 989-773-7981
Fax: 800-669-0619
www.delfield.com
Specifications
Model
# Of
Shelves
Shelf Area
sq.ft.
Volume
cu.ft.
H.P. V/Hz/Ph Amps
Nema
Plug
Ship Weight
Energy
KWH/Day
4427N 1 3.17 8.20 1/5 115/60/1 3.9 5-15P 223lbs/101kg 1.99
D4427N NA NA 8.20 1/5 115/60/1 3.9 5-15P 245lbs/111kg NA
27.13" [68.91]
31.50" [80.01]
TO EDGE OF DRAWER
NOSE OF UNIT
19.60" [49.77]
4.00" OR 6.00" DEEP PANS ON TOP
4.00" DEEP PANS ONLY ON BOTTOM
33.59" [85.31]
36" [91.44]
4427N ISO View
4427N Elevation View
4427N Right Side View
D4427N ISO View
D4427N Elevation View
D4427N Right Side View
20.75" [52.70]
17.35" [44.08]
26.86" [68.22]
23.79" [60.43]
31.50" [80.01]
33.59" [85.31]
36" [91.44]
27.13" [68.91]
NOSE OF UNIT
TO EDGE OF DOOR
21.94" [55.73]
SHELF
ALT. SHELF
7.53" [19.10]
12.98" [33.00]
6.11" [15.52]
25.67" [65.20]
22.75" [57.79]
INTERIOR DIMENSION
20.75" [52.70]
17.35" [44.08]
26.86" [68.22]
23.79" [60.43]
31.50" [80.01]
33.59" [85.31]
36" [91.44]
27.13" [68.91]
NOSE OF UNIT
TO EDGE OF DOOR
21.94" [55.73]
SHELF
ALT. SHELF
7.53" [19.10]
12.98" [33.00]
6.11" [15.52]
25.67" [65.20]
22.75" [57.79]
INTERIOR DIMENSION
20.75" [52.70]
17.35" [44.08]
26.86" [68.22]
23.79" [60.43]
31.50" [80.01]
33.59" [85.31]
36" [91.44]
27.13" [68.91]
NOSE OF UNIT
TO EDGE OF DOOR
21.94" [55.73]
SHELF
ALT. SHELF
7.53" [19.10]
12.98" [33.00]
6.11" [15.52]
25.67" [65.20]
22.75" [57.79]
INTERIOR DIMENSION
4427N Flat Top
Front-Breathing Self-Contained Flat Top Refrigerated Bases
Printed in the U.S.A.
DS4427N
05/11
Deleld reserves the right to make changes to the design or specications without prior notice.
INSTALLATION NOTE:
Refrigeration system is designed so that air will flow under the unit, through the compressor
area and out the front of the unit. Any restriction to this air flow path will void the warranties.
PLEASE NOTE:
Air flow through the louver on the back of the unit is not necessary for operation, however, any
air which passes through the louver is beneficial.
  • Page 1 1
  • Page 2 2

Delfield 4427N Datasheet

Delfield
Brand
Delfield
Model
4427N
Type
Datasheet
This manual is also suitable for

Delfield 4427N is a single section refrigerator with a door that is 100% front breathing, allowing it to be pushed against a wall or built into a cabinet or an existing line up. It features durable, rugged stainless steel sides, top and front and has an exclusive ABS interior that is extremely durable and will not dent, chip or corrode. The heavy duty self-closing hinges and 10-year warranty on the drawer system's track assembly ensure longevity. The environmentally friendly R404A refrigerant and high density foamed in place polyurethane insulation keep energy costs low.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents