GIANNI INDUSTRIES, INC.
Copyright 2008 Gianni industries, inc. All rights reserved.
DM-CA-TS-980 Ver. D Published on 2008.07.29
The products are manufactured under an ISO
9001 QC 080000 Certified Quality
Management Program environment back its
product quality, performance and commitment
to customer satisfaction.
&
Statement
Specifications
TS-980 Tag Simulator
The Tag Simulator is an extremely simple "Programming
Device" that allows adding and deleting proximity card/tag
numbers from the reader memory (For Easiprox series stand-
alone proximity reader) when the tag is lost or not available.
One Tag Simulator can be utilized at different sites - but for
security reasons it will operate only in conjunction with the
Master Tag.
Unit size : 120 L x 54Wx38Hmm
Weight : 180 g
Operating distance : less than 60 mm
Battery:PP3-9V
Application
Press
Present the MASTER TAG twice to the reader
(The unit is now in TAG DELETE mode)
Red LED flashing
(Continuing)Display Press
Press
Completed
Press
Read the Master Tag twice(on Reader)Easiprox
(Repeat)
For example delete card ABA form codes " " from
proximity reader.
0001206932
Easiprox
Operating distance
less than 6 cm
The product is warranted against defects in material and
workmanship while used in normal service for a period of 1
year from the date of sale to the original customer. The GEM
policy is one of continual development and improvement;
therefore GEM reserves the right to change specifications
without notice.
Warranty
Send information
Modulate 0 to 9
Skip over next digit
Power on/off
0001206932 00018,27284
Wiegand-32bits format codes
ABA form codes
No. 13, Zhong Sing Road, Tu-Cheng Industrial Zone,
Tu-Cheng City, Taipei, Taiwan 23678
Tel: 886-2 2267 7986 / Fax: 886-2 2267 9876
E-Mail: [email protected]
Website: gianni.tw
/
