Page is loading ...
OWNER’S MANUAL
CT104 - 10” HYBRID TABLE SAW
TABLE OF CONTENTS
GENERAL SAFETY INSTRUCTIONS PAGE 3
ADDITIONAL SAFETY RULES PAGE 4
SAW BLADE / KICKBACK INFORMATION PAGE 5-6
MAKING A PUSH STICK PAGE 7
LOOSE PART CONTENTS PAGE 8
UNPACKING AND ASSEMBLY PAGE 9-10
MACHINE SPECIFICATIONS PAGE 11
MACHINE LEGEND PAGE 12
ASSEMBLY INSTRUCTIONS
MOBILE BASE PAGE 13
EXTENSION TABLES PAGE 14
RIGHT AND LEFT FRONT RAILS PAGE 15
REAR RAILS PAGE 16
MOTOR SWITCH PAGE 17
GUARD AND SPLITTER PAGE 18
ADJUSTING THROAT PLATE/BEVEL STOPS PAGE 19-20
ADJUSTING THE RIP FENCE PAGE 22-23
REPLACING THE SAW BLADE PAGE 24
LEVELING THE SAW & ON/OFF SWITCH PAGE 25
SAW BLADE PAGE 26
OPERATING INSTRUCTIONS
GENERAL PAGE 27
RIPPING PAGE 28
BEVEL RIPPING / CROSS CUTTING PAGE 29
BEVEL CROSS CUTTING/MITERING PAGE 30
DADO CUTTING PAGE 31
DUST COLLECTION / LUBRICATION PAGE 32
MAINTAINING THE RIP FENCE PAGE 33
TROUBLE SHOOTING PAGE 34
PARTS DIAGRAM PAGE 35
PARTS LISTING PAGE 36-39
CRAFTEX WARRANTY INFORMATION PAGE 40
2
GENERAL SAFETY INSTRUCTIONS
EXTREME CAUTION SHOULD BE USED IN OPERATING ALL POWER TOOLS. KNOW
YOUR POWER TOOL, BE FAMILIAR WITH ITS OPERATION. READ THE OWNER’S
MANUAL AND PRACTICE SAFE USAGE PROCEDURES AT ALL TIMES.
CONNECT your machine ONLY to the matched and specified power source.
WEAR SAFETY GLASSES, RESPIRATORS, HEARING PROTECTION
and SAFETY SHOES when operating heavy machinery. Always wear safety
glasses.
DO NOT wear loose clothing or jewellery when operating machinery.
A Safe Environment is important. Keep the area free of dust, dirt and other
debris in the immediate vicinity of the machine.
BE ALERT! Do Not Use prescription or other drugs that may affect your ability
or judgement to safely use this machine.
DISCONNECT the power source when changing blades or making adjustments
or repairs.
NEVER leave an operating tool unattended.
NEVER reach over the table when the tool is in operation.
ALWAYS keep blades sharp and properly aligned.
ALWAYS keep all safety guards in place and ensure their proper function.
ALWAYS use push sticks and featherboards to safely feed your work through the
machine.
ALWAYS make sure that any tools used for adjustments are removed before
operating the machine.
ALWAYS secure your work with the appropriate clamps or vises if necessary.
ALWAYS keep bystanders safely away while operating machinery.
THINK SAFETY. WORK SAFELY. Never attempt a procedure if it does not
feel safe or comfortable.
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
/
