Steren COM-445 Owner's manual

Page is loading ...

19

-Buena:

Video CD : NTSC(352*240 / 29.97f/s / 1150000 bit/s),

PAL(352*288 / 25.00 f/s / 1150000 bit/s)

Super Video CD : NTSC(480*480 / 29.97f/s / 2500000 bit/s),

PAL(480*576 / 25.00 f/s / 2500000 bit/s)

DVD-Video : NTSC(720*480 / 29.97f/s / 6500000 bit/s),

PAL(720*576 / 25.00 f/s / 6500000 bit/s)

Long DVD-Video : NTSC(720*480 / 29.97f/s / 2000000 bit/s),

PAL(720*576 / 25.00 f/s / 2000000 bit/s)

-Normal:

Video CD : NTSC(352*240 / 29.97f/s / 1150000 bit/s),

PAL(352*288 / 25.00 f/s / 1150000 bit/s)

Super Video CD : NTSC(480*480 / 29.97f/s / 2500000 bit/s),

PAL(480*576 / 25.00 f/s / 2500000 bit/s)

DVD-Video : NTSC(720*480 / 29.97f/s / 5000000 bit/s),

PAL(720*576 / 25.00 f/s / 5000000 bit/s)

Long DVD-Video : NTSC(720*480 / 29.97f/s / 1500000 bit/s),

PAL(720*576 / 25.00 f/s / 1500000 bit/s)

-Regular:

Video CD : NTSC(352*240 / 29.97f/s / 1150000 bit/s),

PAL(352*288 / 25.00 f/s / 1150000 bit/s)

Super Video CD : NTSC(480*480 / 29.97f/s / 2500000 bit/s),

PAL(480*576 / 25.00 f/s / 2500000 bit/s)

DVD-Video : NTSC(720*480 / 29.97f/s / 4000000 bit/s),

PAL(720*576 / 25.00 f/s / 4000000 bit/s)

Long DVD-Video : NTSC(720*480 / 29.97f/s / 1150000 bit/s),

PAL(720*576 / 25.00 f/s / 1150000 bit/s)

Page is loading ...

COM-445

USB 2.0 video capture device

Thank You

on purchasing your new Steren product.

This manual includes all the feature

operations and troubleshooting necessary

to install and operate your new Steren USB

2.0 video capture device. Please review

this manual thoroughly to ensure proper

installation and operation of this product. For

support, shopping, and everything new at

Steren, visit our website:

www.steren.com

Page is loading ...

CONTENT

Features 6

Controls 7

Connection Diagram 8

Driver installation in Windows XP 9

Application setup 11

Application use 13

File 14

Capture 15

Edit 25

Burning 37

ipod/PSP Converter 43

Specications 45

6

Before using your new USB 2.0 Capture device, please read the

following recommendations.

A smart & advanced device for Desktop & notebook user to transfer analog

signal video to digital signal, and edit their own home video on PC. No matter

AV & S-video video device, the image is easily sent to PC for editing and

saving on CD in VCD and DVD format.

Provide high-quality video processor & compression solution to let the video

resolution up to 30fps at 720 x 480 in NTSC le format in order to provide the

best video quality for user.

- Composite and S-Video inputs

- RCA audio input jacks

- Compatible with NTSC, PAL and SECAM video systems

- Real-time video capture

- High data transfer rate (USB 2.0)

- MPEG 1 / MPEG 2 / MPEG 4 coding format

- 30fps in NTSC system at 720 x 480 pixels and 25fps in PAL system at 720

x 576 pixels

- Plug & Play

Features

7

Controls

1.- USB connector

Allows you to plug the equipment to an available

USB 2.0 port in the computer.

2.- S-Video input

Use this connector to plug a video

device with a S-Video connector.

3.- Composite video input

Use this connector to plug a video device with

a Composite (RCA) connector.

4.- Audio input

Allows you to connect the audio cables (left and right)

from a video device with RCA outputs.

8

CameraDVD

USB

PC

RCA video

RCA audio

Connection Diagram

9

Make sure to install the drivers BEFORE to plug the equipment to the

computer.

1.- Place the installation CD into the CD-ROM drive, then open x86 (or x64

if you have a 64 bits OS) folder, locate the le named setupx86.exe (or

setupx64.exe) and run it.

Driver installation in

Windows XP

2.- Press Next to continue in the Welcome window.

3.- Select installation folder.

4.- The installation begins.

10

5.- If windows prompts you to install the driver even if it’s not signed, accept it.

6.- Press Finish to conclude the process.

7.- You must restart your PC.

8.- Once the computer re-booted, plug the capture device into an available

USB 2.0 port in the computer.

9.- The system detects the new hardware, and automatically updates some

les.

11

1.- Place installation CD on your computer.

2.- Enter to the APP folder and run setup.exe le.

Application setup

3.- Select installation’s language.

12

4.- Accept terms of use.

5.- Select the folder where you want to install the program.

6.- The installation will ask you the menu where the program will appear. If

you select “Next” without selecting one, a especial menu called “honestech

VHS to DVD 2.5 SE” will be created.

7.- Select “Install” to begin installation.

8.- Wait until the installation is over and select “Finish”.

13

Application use

The rst time you open the application, it will ask you for a serial number. You

will nd it in the sn.txt le on the installation CD.

Once you have entered the serial number and enter application, you will nd

the next options:

14

File

Manage current tasks in project units.

- New Project

Create a new project.

- Open Project

Open an existing project.

- Save Project

Save the work that has been done up to now.

15

• Video Device

Using the drop down menu shown above, you can select the input source for

your video. this auto-detects video input devices and list them here. All your

attached capture device will be list here.

• Set Video Device

Change Input source, Control and TV Tuner setting of the device selected.

Capture

16

• Audio Device

Select the audio device currently installed.

• Set Audio Device

Select the input source of the device selected. (Select Line-In normally).

• Format

Select the output le format from drop down menu. (VCD / SVCD / DVD /

Long DVD /AVI).

-VCD:

Video CD (VCD) stands for ‘Video Compact Disc’ and basically,

it is a CD that contains moving pictures and sound. A VCD has

the capacity to hold up to 74/80 minutes on 650MB/700MB

CDs respectively of full-motion video along with quality stereo

sound. VCDs use a compression standard called MPEG to store

the video and audio

-SVCD:

A Super Video CD (SVCD) is very similar to a Video CD

(VCD), and it has the capacity to hold about 35-60 minutes

on 74/80 min CDs of much higher quality full-motion video.

-DVD-Vídeo:

DVD-Video was originally designed to meet the requirements

of the movie industry to support a complete movie on a single

‘compact’ optical disc. The use of MPEG-2 video compression

gives superlative results far better than VHS and Laserdisc.

17

- Long DVD:

Long DVD maintains the compatibility with DVD and saves a

movie with quality of DVD-Video and increases capacity to three

or four times in movie time/length.

- AVI :

AVI stands for Audio Video Interleave. It is a special case of

the RIFF (Resource Interchange File Format), and AVI is dened

by the Microsoft. AVI is the most common format for audio/video

data on the PC.

• Image Filter

- Delete Logo / Telop

This is a lter which is delete logo or telop in the screen. you can

use to less than 3 lter for one screen. if you check a

‘Enable’ check button you could watched that was be applied ,

and move to a scrollbar you can change the position .

1: Do control the rst lter.

2: Do control the second lter.

3: Do control the second lter.

- Clean noise

This is a lter which is clean nosie in the screen.

-Adjustment

To control of color value that is input video

18

• Video Type

Select the type of output le.

VCD: NTSC (352*240) / PAL (352*288)

SVCD: NTSC (480*480) / PAL (480*576)

DVD: NTSC (720*480,352*480,352*240) / PAL

(720*576,352*576,352*288)

Long DVD: NTSC (720*480,352*480,352*240) / PAL

(720*576,352*576,352*288)

AVI: VGA (640*480) / QVGA (320*240)

• Quality

Adjust the quality of the output le. (Best/Good/Normal/Average)

-Best:

VCD: NTSC (352*240 / 29.97f/s / 1150000 bit/s) , PAL (352*288 /

25.00 f/s / 1150000 bit/s).

SVCD: NTSC (480*480 / 29.97f/s / 2500000 bit/s) , PAL (480*576

/ 25.00 f/s / 2500000 bit/s).

DVD: NTSC (720*480 / 29.97f/s / 8000000 bit/s) , PAL (720*576 /

25.00 f/s / 8000000 bit/s).

Long DVD: NTSC (720*480 / 29.97f/s / 2500000 bit/s) , PAL

(720*576 / 25.00 f/s / 2500000 bit/s)

19

-Good:

VCD: NTSC (352*240 / 29.97f/s / 1150000 bit/s) , PAL (352*288

/ 25.00 f/s / 1150000 bit/s)

SVCD: NTSC (480*480 / 29.97f/s / 2500000 bit/s) , PAL (480*576

/ 25.00 f/s / 2500000 bit/s)

DVD: NTSC (720*480 / 29.97f/s / 6500000 bit/s) , PAL (720*576

/ 25.00 f/s / 6500000 bit/s)

Long DVD: NTSC (720*480 / 29.97f/s / 2000000 bit/s) , PAL

(720*576 / 25.00 f/s / 2000000 bit/s)

-Normal:

VCD: NTSC (352*240 / 29.97f/s / 1150000 bit/s) , PAL (352*288

/ 25.00 f/s / 1150000 bit/s)

SVCD: NTSC (480*480 / 29.97f/s / 2500000 bit/s) , PAL (480*576

/ 25.00 f/s / 2500000 bit/s)

DVD: NTSC (720*480 / 29.97f/s / 5000000 bit/s) , PAL (720*576

/ 25.00 f/s / 5000000 bit/s)

Long DVD: NTSC (720*480 / 29.97f/s / 1500000 bit/s) , PAL

(720*576 / 25.00 f/s / 1500000 bit/s)

-Average:

VCD: NTSC (352*240 / 29.97f/s / 1150000 bit/s) , PAL (352*288

/ 25.00 f/s / 1150000 bit/s)

SVCD: NTSC (480*480 / 29.97f/s / 2500000 bit/s) , PAL (480*576

/ 25.00 f/s / 2500000 bit/s)

DVD: NTSC (720*480 / 29.97f/s / 4000000 bit/s) , PAL (720*576

/ 25.00 f/s / 4000000 bit/s)

Long DVD: NTSC (720*480 / 29.97f/s / 1150000 bit/s) , PAL

(720*576 / 25.00 f/s / 1150000 bit/s)

20

• Split Size

Split size takes the guess work out by automatically splitting the le size of

capture video according to the format and disc capacity you will be using to

burn your movie. The output les are partitioned according to the capacity of

the disk to be burned (CD/DVD).

• Maximum Recording Time

The maximum recording time will be determined depending on the output

format and amount of hard drive space you have available. Files cannot be

created which exceed this time. This is ideal if you want to monitor and record

activities at home while you are away for short time. (Few hours are ideal).

• Recording duration time

Set the recording duration time you want. This is very handy when you know

the duration of the movie you are capturing. You don’t have to monitor the

capture process, just set the recording duration and will HT Video to DVD will

stop once this time expires. It is always good idea to set record duration time.

If not set, recording will continue up to the maximum recording time.

21

• Commercial Cutting

This function is cutting a scene which not be want to included at the recor-

ding le like to a commercial scene, that is only work at recording status. At

the rst, start recording and click when come out the CM and click

after end CM and then the cuttime data be add to a combolist. Do

again when you want to cut like this ,and after stop recording it should be

changed to Edit and add the list of cuttime date in the storybook. if you want

to detail cut of the cut clip, you dobule click the clip that you can see the time

range at the play panel and control a seekbar and click then be

applied, At the last, click it should be output a le .

• Output Folder

Specify the location where the capture video will be saved.

22

• Recording and Burning

If checked, starts burning process right after recording for the designated

time. This is ideal when you are copying your home videotapes into DVD

disc. Makes the whole process automatic.

- Burn Option

Select CD/DVD writing device

Select video type

Select video standard

Note: NTSC is used in USA and Japan; PAL is used in Europe.

Make UDI File

Check this box to keep the UDI le that was created during burning. Otherwise

the le will be deleted after the burning is completed.

Page is loading ...

Steren COM-445 Owner's manual

Related papers

Other documents