Simrad AD80 Installation guide

Simrad
Brand
Simrad
Model
AD80
Type
Installation guide

This manual is also suitable for

Simrad AD80

Simrad AD80 is a thruster interface that provides control and monitoring of thrusters on your boat. It has a user-friendly interface that makes it easy to set up and operate, and it can be integrated with a variety of other Simrad products, such as autopilots, chartplotters, and radar systems.

The AD80 has a number of features that make it a versatile and powerful thruster control system. These features include:

  • Analog and digital input/output (I/O): The AD80 has a variety of analog and digital I/O ports that allow it to be connected to a wide range of sensors and devices. This makes it possible to use the AD80 to control thrusters based on a variety of inputs, such as joystick input, autopilot output, or wind sensor data.

Simrad AD80

Simrad AD80 is a thruster interface that provides control and monitoring of thrusters on your boat. It has a user-friendly interface that makes it easy to set up and operate, and it can be integrated with a variety of other Simrad products, such as autopilots, chartplotters, and radar systems.

The AD80 has a number of features that make it a versatile and powerful thruster control system. These features include:

  • Analog and digital input/output (I/O): The AD80 has a variety of analog and digital I/O ports that allow it to be connected to a wide range of sensors and devices. This makes it possible to use the AD80 to control thrusters based on a variety of inputs, such as joystick input, autopilot output, or wind sensor data.
*988-10473-001*
pro.simrad-yachng.com
For technical specificaons,
cerficates and declaraons,
refer to the product web site on:
www.simrad-yachng.com
211 mm (8.29")
197 mm (7.77")
185 mm (7.27")
60 mm
(2.36")
167 mm
(6.58")
80 mm
(3.15")
48 mm
(1.88")
Parts included Dimensions
Mounting
AD80
THRUSTER INTERFACE,
INSTALLATION GUIDE
System wiring
1
1 * AD80 Computer
1 * Cable retainer
6 * Fixing screws, 3.5 * 19 mm (DIN7981B)
10 * Strips
8 * Connectors
1 * Micro-C Drop cable (male)
1 * Micro-C T-Joiner
1
2
3
4
5
6
7
5
6
7
1
T T
AD80/
SD80
OPTION
12/24V DC
12/24 V DC
12 V DC
AC70 SI80
1*
NMEA 0183
IN/OUT
COMPASS
GPS
SENSOR
4*
NMEA 0183
IN/OUT
THRUSTER
CONTROL
DRIVE UNIT
5
6
7
4
12/24 V DC
AP70/80
AUTOPILOT
CONTROL
HEAD
32
AP60
Micro-C CAN bus backbone
SimNet to Micro-C (male) Drop cable
Micro-C Drop cable (female to male)
Micro-C Power cable with 120 Ohm
terminator, female
Micro-C Drop cable, male
Micro-C T-Joiners
Micro-C Terminator, 120 Ohm, male
1
2
3
4
5
6
7
2
4
3
AD80 Terminal layout
CAN Bus backbone
External
System selector
External I/O -
Ready signal
External I/O -
Handshake
External
Mode selector - pulse
SIMNET
BACKBONE
Analog drives
VOLTAGE CONTROL LINE
RED
BLK
WHT
BLU
NET-S
NET-C
NET-H
NET-L
SIMNET
HS1
UI CRTL
RUD
UI
RUD FRQ
READY
HS2 MODE
U IN
RANGE
U
CTRL
MODE
UI CRTL
U_CTRL
UCOM
UCTRL
EXT
READY
ON
INT
UCOM
UCTRL
+/- 10 V
UI CRTL
U_CTRL
4-20 mA
UCOM
UCTRL
UCTRL
UREF-
ICTRL
IRET
ICTRL
IRET
EXT
READY
ON
INT
Voltage line always connected.
La línea de voltaje esta siempre conectada.
Voltage line broken by a solid state relay contact when the autopilot is not ready for steering.
La línea de voltaje se interrumpe con un relé de estado sólido cuando el piloto no es listo para el gobierno.
U_CTRL
READY
ON
U_CTRL
READY
ON
UI CRTL
U_CTRL
UREF +
UCOM
UREF -
UCTRL
EXT READY
12 - 24 V DC
EXTERNAL SUPPLY
ON
INT
0 -
UI CRTL
U_CTRL
UREF +
UREF -
UCTRL
EXT READY
12 - 24 V DC
EXTERNAL SUPPLY
ON
INT
PART OF
EXTERNAL
MODE SELECTOR
AUTOSTBY
AUTO
STBY
RET
MANUAL
AUTOPILOT
AUTO
STBY
RET
MODE
EXTERNAL INTERFACE
SYSSEL
RET
SYSSEL
RET
READY
Max
100 mA
OUT A
OUT B
OUT A
OUT B
-
Max
100 mA
+
5 mA
OUT A
OUT B
IN +
RET
HS..
OUT A
OUT B
IN +
RET
HS..
Central Alarm panel
OUT A
ACKN.
ACKN.
ALARM FROM AUTOPILOT
OUT B
IN +
RET
HS..
OUT A
OUT B
IN +
RET
HS..
RUD FRQ
RUD
UI
RUD
UI
U IN
RANGE
Rudder Feedback
RF300
RF45X
FRQ +
FRQ -
RUD FRQ
FRQ +
FRQ -
RET
FRQ +
5
6
7
FRQ -
RET
RUD FRQ
FRQ +
RET
RF14XU
COM
U_IN
+/- 20V
+/- 10V
+/- 5V
COM
U_IN
EXTERNAL
FEEDBACK
SIGNAL
EXTERNAL
VOLTAGE
INPUT
COM
U_IN
RUD
UI
U IN
RANGE
COM
I_IN
+/- 20V
+/- 10V
+/- 5V
4-20 mA
CURRENT
FEEDBACK
INPUT
COM
I_IN
EXTERNAL FEEDBACK
POT.METER INPUT
FRQ +
RET
COM
U_IN
AP70/80AP60AP70/80AP60
AP70/80AP60
AP70/80AP60 AP70/80AP60
AP70/80AP60AP70/80AP60
OPTION OPTION
OPTION
OPTION
OPTION OPTION
AP70/80AP60 AP70/80AP60
Grounding
TO SHIP’S
MAIN
GROUND
  • Page 1 1
  • Page 2 2

Simrad AD80 Installation guide

Simrad
Brand
Simrad
Model
AD80
Type
Installation guide
This manual is also suitable for

Simrad AD80

Simrad AD80 is a thruster interface that provides control and monitoring of thrusters on your boat. It has a user-friendly interface that makes it easy to set up and operate, and it can be integrated with a variety of other Simrad products, such as autopilots, chartplotters, and radar systems.

The AD80 has a number of features that make it a versatile and powerful thruster control system. These features include:

  • Analog and digital input/output (I/O): The AD80 has a variety of analog and digital I/O ports that allow it to be connected to a wide range of sensors and devices. This makes it possible to use the AD80 to control thrusters based on a variety of inputs, such as joystick input, autopilot output, or wind sensor data.
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents