User manual BTA-6000 / BTA-6001
6
Note:
-The AC cord must be unplugged from both the socket on the unit and the power outlet for the unit to run on the
batteries.
- When the set is connected to the mains, the power source automatically switches to AC.
Notes on batteries (not supplied)
s sunshine, fire or the like.
to avoid leakage, remove the batteries when unit will not be used for a long period of time.
them back for specific recycling.
CAUTION:
Danger of explosion if batteries are incorrectly replaced. Replace only with the same or equivalent type.
USING THE RADIO
1. Slide the ON/OFF ON
2. Use the FM/MW/LINE IN selector to select band.
3. Use the Tuning control to tune to your desired radio station.
4. Adjust the volume level.
5. Slide the ON/OFF OFF
To enhance radio reception ability:
FM: Extend the telescopic antenna.
MW: Rotate the unit horizontally for optimum reception.
CONNECTING LINE IN SOURCE
1. Connect your LINE IN source (e .g. mp3 player) to the LINE IN jack on the left side of the unit.
2. Slide the FM/MW/LINE IN selector to LINE IN position.
3. Start playback from your LINE IN source.
3. Adjust the volume to desired level.
4. To stop playback, disconnect your LINE IN source from the LINE IN jack.
PRODUCT INFORMATION
Power consumption: 5W
Frequency Range:
FM 87.5-108.0 MHz
MW 530-1600 KHz
LISTENING WITH EARPHONES
Connect earphones (not included) to the earphone jack on unit.
s hearing.
SAFETY INSTRUCTION
CAUTION: To reduce the risk of electric shock, do not remove the cover (or back). There are no
user serviceable parts inside the unit. Refer all servicing to qualify personnel.
The lightening flash with arrowhead symbol
