Brica Brica Elite Seat Guardian User manual

Type
User manual

This manual is also suitable for

User Manual
60007
Keep these instructions for
future reference as they
contain important information.
Adult installation required.
Accessories not included.
Seat Guardian
1
2
Instructions
Installation:
1.
Unbuckle head restraint strap at top of back panel.
2.
Place Seat Guardian
in center of desired seating location. (Fig. A)
3.
If vehicle is equipped with a head restraint in desired seating location, attach head
restraint strap around vehicle head restraint and adjust strap length to position
back panel of Seat Guardian
at desired/proper height. (Fig. B)
NOTE: For intallations in vehicles without a head restraint, the back panel may
need to be folded to prevent the back panel from falling over. (Fig. C)
Removal:
1.
Remove child safety seat.
2.
Unbuckle head restraint strap and remove Seat Guardian
from vehicle.
3.
Store in a cool, dry place.
Care:
Surface Wash.
(Fig. A) (Fig. B) (Fig. C)
IMPORTANT NOTE: Always install the child safety seat in
accordance to the child safety seat manufacturer’s
installation instructions. Adjust positon of Seat Guardian
as
needed to center child safety seat on Seat Guardian
.
Questions?
Retain this address for future reference.
USA
©2012 BRICA, Inc., 500 West 5th Street,
Suite 220, Charlotte, NC 28202
1.866.869.8257 • brica.com
Australia
CNP Brands, PO Box 8 Deer Park VIC 3023
1 300 667 137 • cnpbrands.com.au
Printed in China
making together better
®
  • Page 1 1
  • Page 2 2
  • Page 3 3

Brica Brica Elite Seat Guardian User manual

Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI