User Manual
60007
Keep these instructions for
future reference as they
contain important information.
Adult installation required.
Accessories not included.
Seat Guardian
™
1
2
Instructions
Installation:
1.
Unbuckle head restraint strap at top of back panel.
2.
Place Seat Guardian
™
in center of desired seating location. (Fig. A)
3.
If vehicle is equipped with a head restraint in desired seating location, attach head
restraint strap around vehicle head restraint and adjust strap length to position
back panel of Seat Guardian
™
at desired/proper height. (Fig. B)
NOTE: For intallations in vehicles without a head restraint, the back panel may
need to be folded to prevent the back panel from falling over. (Fig. C)
Removal:
1.
Remove child safety seat.
2.
Unbuckle head restraint strap and remove Seat Guardian
™
from vehicle.
3.
Store in a cool, dry place.
Care:
Surface Wash.
(Fig. A) (Fig. B) (Fig. C)
IMPORTANT NOTE: Always install the child safety seat in
accordance to the child safety seat manufacturer’s
installation instructions. Adjust positon of Seat Guardian
™
as
needed to center child safety seat on Seat Guardian
™
.
Questions?
Retain this address for future reference.
USA
©2012 BRICA, Inc., 500 West 5th Street,
Suite 220, Charlotte, NC 28202
1.866.869.8257 • brica.com
Australia
CNP Brands, PO Box 8 Deer Park VIC 3023
1 300 667 137 • cnpbrands.com.au
Printed in China
making together better
®
-
1
-
2
-
3
