Simplicity REGENT / 500 / 2500 SERIES (TT) User manual

Brand: Simplicity

Model: REGENT / 500 / 2500 SERIES (TT)

Category: Lawnmowers

Type: User manual

This manual is also suitable for

How to use this file...(Operators Manuals)

————————————————————————————————————————————–––

Instructions for

Print Vendors (Paper Manuals)

Paper Size: * 11 x 17

* Body—50 lbs brilliant white offset or equivalent.

* Cover—on pre-printed two-tone “Swash” stock.

Press: * Body—1-color, 2-sided

* Cover imprint —1-color, 1-sided

Bindery:* Saddle Stitch, Face Trim

* Face Trim

COVERS:* This file may contain several manuals, which differ only in their covers.

* Covers are all present at the beginning of this file.

* Back cover for a particular manual is the page IMMEDIATELY AFTER the front cover.

• Check the front cover for the individual part number (typically a 171xxxx number).

BODY: • The body of the manual is identical, regardless of the cover used.

* REMEMBER: ODD number pages are ALWAYS right hand pages, and EVEN number are ALWAYS

left hand pages.

General: * This instruction page is NOT part of the manual and must NOT be printed.

• Pages labeled with the text “THIS PAGE INTENTIONALLY BLANK” are placement pages ONLY,

and should NOT be printed.

————————————————————————————————————————————–––

If you have further questions on how to utilize this file, please contact

Simplicity Technical Publications Department at (262) 284-8647.

THIS PAGE INTENTIONALLY BLANK

OPERATOR’S

MANUAL

Regent

Regent Series

15HP Hydro Tractors

Mfg. No. Description

1693528 Regent, 15HP Hydro

1693534 Regent, 15HP Hydro (Export)

16HP Hydro Tractors

Mfg. No. Description

1693530 Regent, 16HP Hydro

1693536 Regent, 16HP Hydro (Export)

1694141 Regent, 16HP Hydro

38” Mower Decks

Mfg. No. Description

1693552 38” Mower Deck

1693555 38” Mower Deck (Export)

1693792 38” Mower Deck

1693794 38” Mower Deck (Export)

44” Mower Decks

Mfg. No. Description

1693553 44” Mower Deck

1693556 44” Mower Deck (Export)

1693795 44” Mower Deck

1720103-04

Rev 6/2001

TP-100-2250-04-RG-SMA

MANUFACTURING, INC.

500 N Spring Street / PO Box 997

Port Washington, WI 53074-0997

www.simplicitymfg.com

OPERATOR’S

MANUAL

500 Series

15HP Hydro Tractors

Mfg. No. Description

1693540 515H, 15HP Hydro

16HP Hydro Tractors

Mfg. No. Description

1693542 516H, 16HP Hydro

38” Mower Decks

Mfg. No. Description

1693558 38” Mower Deck

1693793 38” Mower Deck

44” Mower Decks

Mfg. No. Description

1693559 44” Mower Deck

1693796 44” Mower Deck

1720115-04

Rev 6/2001

TP-100-2250-04-RG-SMA

AGCO-Allis Lawn & Garden Equipment

500 N. Spring Street \ P.O. Box 997

Port Washington, WI 53074-0997 USA

www.allislawn.com

OPERATOR’S

MANUAL

2500 Series

15HP Hydro Tractors

Mfg. No. Description

1693546 2515H, 15HP Hydro

16HP Hydro Tractors

Mfg. No. Description

1693548 2516H, 16HP Hydro

38” Mower Decks

Mfg. No. Description

1693558 38” Mower Deck

1693793 38” Mower Deck

44” Mower Decks

Mfg. No. Description

1693559 44” Mower Deck

1693796 44” Mower Deck

1720116-04

Rev 6/2001

TP-100-2250-04-RG-SMA

Massey Ferguson Lawn & Garden Equipment

is Manufactured and Distributed by Simplicity Manufacturing, Inc.

500 N. Spring Street • P.O. Box 997

•

Port Washington, WI 53074-0997 USA

www.masseylawn.com

Table of Contents

Identification Numbers........................................2

Safety Rules.........................................................3

Safety Decals .......................................................5

Features, Controls, & Operation ........................6

Controls Location ....................................................6

General ...................................................................7

Safety Interlock System ..........................................7

Checks Before Starting ...........................................8

Clutch/Brake Pedal .................................................8

Parking Brake .........................................................8

Starting The Engine ................................................8

Driving The Tractor .................................................8

Stopping the Tractor ...............................................9

Pushing the Tractor by Hand .................................9

Mower Installation & Removal ..............................10

Adjusting Mower Height and Gauge Wheels ........10

Regular Maintenance ........................................11

Schedule ...............................................................11

Tire Pressure ........................................................11

Raising the Hood & Seat ......................................12

Checking/Adding Gasoline....................................12

Checking the Fuel Filter ........................................12

Oil & Filter Change................................................12

Check / Change Air FIlter......................................12

Replace Spark Plug ..............................................12

Lubrication ............................................................13

Lubricating Axle Shafts .........................................14

Change Hydro Transmission Oil ...........................15

Battery Maintenance .............................................15

Checking Battery Fluid..................................15

Cleaning the Battery and Cables ..................15

Servicing the Mower Blades .................................16

Storage ...............................................................17

Temporary Storage ...............................................17

Long Term Storage ...............................................17

Starting After Long Term Storage .........................17

Troubleshooting, Adjustment, & Service ........18

Chart - Troubleshooting The Tractor.....................18

Chart - Troubleshooting The Mower .....................19

Checking the Battery Voltage ...............................20

Charging A Completely

Discharged Battery ...........................................20

Jump Starting with

Auxiliary (Booster) Battery ................................20

Seat Adjustment....................................................22

Steering Gear Adjustment.....................................22

Brake & Brake Spring Adjustment ........................22

PTO Clutch Adjustment ........................................23

Mower Adjustments ..............................................24

Leveling The Mower......................................24

Blade Brake Check .......................................25

Mower Belt Replacement......................................25

Tractor Drive Belt Replacement............................26

Transmission Purging ...........................................26

Specifications ....................................................27

Parts & Accessories..........................................28

Replacement Parts ...............................................28

Maintenance Items................................................28

Optional Accessories ............................................28

Lawn Care &

Mowing Information ....................................LC—1

International Symbols ................................LC—8

Technical Literature ....................................LC—8

NOTE: In this manual, “left” and “right” are referred to as

seen from the operating position.

TP 100-2250-04-RG-SMA

WARNING

Engine exhaust from this product contains

chemicals known, in certain quantities, to cause

cancer, birth defects, or other reproductive harm.

Identification

Numbers

169XXXX

MFG

Simplicity Manufacturing, Inc.

Port Washington, WI 53074-0997 U.S.A.

SERIAL

XXXXX

IDENTIFICATION NUMBERS

Record your model name/number, tractor and mower

deck manufacturer numbers and engine serial number in

the space provided for easy reference.

• The Tractor I.D. tag is located on the left-side, of the

frame, as shown below.

• The Mower Deck I.D. tag is also on the left side, on

top of the mower deck.

• For location of Engine Serial Number, refer to the

Engine Owner’s Manual.

Be sure to fill out and return the Warranty Registration

Card supplied with your tractor.

Mower Deck

Identification Tag

Tractor

Identification Tag

TRACTOR & MOWER IDENTIFICATION TAG LOCATIONS

SSAAMMPPLLEE

When contacting your Authorized

Dealer for replacement parts, service,

or information YOU MUST HA

THESE NUMBERS.

ENGINE REFERENCE DATA

Model Description Name/Number

Unit MFG Number

PRODUCT REFERENCE DATA

Unit SERIAL Number

Dealer Name

Date Purchased

Engine Make

Engine Type/Spec

Engine Model

Engine Code/Serial Number

Mower Deck MFG Number

Mower Deck SERIAL

Number

GENERAL OPERATION

• Read, understand, and follow all instructions in the manual and on

the unit before starting.

• Only allow responsible adults, who are familiar with the instruc-

tions, to operate the unit (local regulations can restrict operator

age).

• Clear the area of objects such as rocks, toys, wire, etc., which

could be picked up and thrown by the blade(s).

• Be sure the area is clear of other people before mowing. Stop unit

if anyone enters the area.

• Never carry passengers.

• Do not mow in reverse unless absolutely necessary. Always look

down and behind before and while travelling in reverse.

• Be aware of the mower discharge direction and do not point it at

anyone. Do not operate the mower without either the entire grass

catcher or the deflector in place.

• Slow down before turning.

• Never leave a running unit unattended. Always disengage the

PTO, set parking brake, stop engine, and remove keys before dis-

mounting.

• Turn off the PTO switch to disengage the blades when not mowing.

• Stop engine before removing grass catcher or unclogging chute.

• Mow only in daylight or good artificial light.

• Do not operate the unit while under the influence of alcohol or

drugs.

• Watch for traffic when operating near or crossing roadways.

• Use extra care when loading or unloading the unit into a trailer or

truck.

• Data indicates that operators, age 60 years and above, are

involved in a large percentage of riding mower-related injuries.

These operators should evaluate their ability to operate the riding

mower safely enough to protect themselves and others from injury.

• Keep in mind the operator is responsible for accidents occurring to

other people or property.

• All drivers should seek and obtain professional and practical

instruction.

• Always wear substantial footwear and trousers. Never operate

when barefoot or wearing sandals.

• Before using, always visually check that the blades and blade hard-

ware are present, in-tact, and secure. Replace worn or damaged

parts.

• Never operate the machine with defective guards, or without safety

protective devises in place.

• Disengage attachments before: refuelling, removing an attachment,

making adjustments (unless the adjustment can be made from the

operator’s position).

• When the machine is parked, stored, or left unattended, lower the

cutting means unless a positive mechanical lock is used.

• Follow the manufacturer’s recommendation for wheel weights or

counterweights.

SLOPE OPERATION

Slopes are a major factor related to loss-of-control and tip-over accidents,

which can result in severe injury or death. All slopes require extra caution.

If you cannot back up the slope or if you feel uneasy on it, do not operate

on it.

Control of a ride-on machine sliding on a slope will not be regained by the

application of the brake. The main reasons for loss of control are: insuffi-

cient tire grip on the ground, speed too fast, inadequate braking, the type

of machine is unsuitable for it’s task, lack of awareness of the ground con-

ditions, incorrect hitching and load distribution.

Read these safety rules and follow them closely. Failure to obey these rules could result in loss of control

of unit, severe personal injury or death to you, or bystanders, or damage to property or equipment.

This mowing deck is capable of amputating hands and feet and throwing objects.

The triangle in text signifies important cautions or warnings which must be followed.

Safety Rules & Information

WARNING

Never operate on slopes greater than 17.6 percent

(10°) which is a rise of 3-1/2 feet (106 cm) vertically in

20 feet (607 cm) horizontally.

When operating on slopes use additional wheel

weights or counterweights. See your dealer to

determine which weights are available and

appropriate for your unit.

Select slow ground speed before driving onto slope.

In addition to front and rear weights, use extra caution

when operating on slopes with rear-mounted grass

catcher.

Mow UP and DOWN the slope, never across the

face, use caution when changing directions and DO

NOT START OR STOP ON SLOPE.

• See your authorized dealer for recommendations of wheel weights

or counterweights to improve stability.

• Mow up and down slopes, not across.

• Remove obstacles such as rocks, tree limbs, etc.

• Watch for holes, ruts, or bumps. Uneven terrain could overturn the

unit. Tall grass can hide obstacles.

• Use slow speed. Tires may lose traction on slopes even through

the brakes are functioning properly. Choose a low gear so that you

will not have to stop or shift while on the slope.

• Use extra care with grass catchers or other attachments. These

can change the stability of the unit.

• Keep all movement on the slopes slow and gradual. Do not make

sudden changes in speed or direction.

• Always keep unit in gear especially when traveling downhill. When

clutching, release clutch slowly.

Do Not

• Do not start or stop on a slope. If tires lose traction, disengage the

blade(s) and proceed slowly straight down the slope.

• Do not turn on slopes unless necessary, and then, turn slowly and

gradually downhill, if possible.

• Do not mow near drop-offs, ditches, or embankments. The mower

could suddenly turn over if a wheel is over the edge of a cliff or

ditch, or if an edge caves in.

• Do not mow on wet grass. Reduced traction could cause sliding.

• Do not try to stabilize the unit by putting your foot on the ground.

• Do not use grass catchers on steep slopes.

• Do not mow slopes you cannot back up.

• Do not shift to neutral and coast down hill.

Safety Rules

Slope Operation Continued

Children

Tragic accidents can occur if the operator is not alert to the presence of

children. Children are often attracted to the unit and the mowing activity.

Never assume that children will remain where you last saw them.

• Keep children out of the mowing area and under the watchful care

of another responsible adult.

• Be alert and turn unit off if children enter the area.

• Before and during reverse operation, look behind and down for

small children.

• Never carry children. They may fall off and be seriously injured or

interfere with safe unit operation.

• Never allow children to operate the unit.

• Use extra care when approaching blind corners, shrubs, trees, or

other objects that may obscure vision.

TOWING

• Never allow children or others in or on towed equipment.

• Tow only with a machine that has a hitch designed for towing. Do

not attach towed equipment except at the hitch point.

• Follow the manufacturer’s recommendations for weight limit for

towed equipment and towing on slopes.

• On slopes, the weight of the towed equipment may cause loss of

traction and loss of control.

• Travel slowly and allow extra distance to stop.

• Do not shift to neutral and coast down hill.

TRANSPORTING AND STORAGE

• Always observe safe refueling and fuel handling practices when

refueling the tractor after transportation or storage.

• Always follow the engine manual instructions for storage prepara-

tions before storing the tractor for both short and long term periods.

• Always follow the engine manual instructions for proper start-up

procedures when returning the unit to service.

• Never store the unit or fuel container inside where there is an open

flame or pilot light, such as in a water heater. Allow unit to cool

before storing.

EMISSIONS

• Engine exhaust from this product contains chemicals known, in

certain quantities, to cause cancer, birth defects, or other repro-

ductive harm.

• Look for the relevant Emissions Durability Period and Air Index

information on the engine emissions label.

WARNING

When transporting this tractor on an open trailer,

make sure unit is facing forward, toward the direction

of travel. If tractor is facing backward, wind lift could

cause damage to the hood.

SERVICE AND MAINTENANCE

• Use extra care in handling gasoline and other fuels. They are flam-

mable and vapors are explosive.

a) Use only an approved container.

b) Never remove gas cap or add fuel with the

engine running. Allow engine to cool before refueling. Do not

smoke.

c) Never refuel the unit indoors.

• If fuel is spilled, do not attempt to start the engine but move the

machine away from the area of spillage and avoid creating any

source of ignition until petrol vapors have dissipated.

• Replace all fuel tank caps and fuel container caps securely.

• Never fill containers inside a vehicle or on a truck bed with a plastic

bed liner. Always place containers on the ground away from your

vehicle before filling.

• Remove gas-powered equipment from the truck or trailer and refuel

it on the ground. If this is not possible, then refuel such equipment

on a trailer with a portable container, rather than from a gasoline

dispenser nozzle.

• Keep nozzle in contact with the rim of the fuel tank or container

opening at all times until fueling is complete. Do not use a nozzle

lock-open device.

• If fuel is spilled on clothing, change clothing immediately.

• Maintain or replace safety and instruction labels as necessary.

• Never run a unit in an enclosed area.

• Keep nuts and bolts, especially blade attachment bolts, tight and

keep equipment in good condition.

• Never tamper with safety devices. Check their proper operation

regularly and make necessary repairs if they are not functioning

properly.

• Keep unit free of grass, leaves, or other debris build-up. Clean up

oil or fuel spillage.

• Stop and inspect the equipment if you strike an object. Repair, if

necessary, before restarting.

• Never make adjustments or repairs with the engine running unless

specified otherwise in the engine manufacturer’s manual.

• Grass catcher components are subject to wear, damage, and dete-

rioration, which could expose moving parts or allow objects to be

thrown. Frequently check components and replace with manufac-

turer’s recommended parts, when necessary.

• Mower blades are sharp and can cut. Wrap the blade(s) or wear

gloves, and use extra caution when servicing them.

• Check brake operation frequently. Adjust and service as required.

• Use only factory authorized replacement parts when making

repairs.

• Always comply with factory specifications on all settings and

adjustments.

• Only authorized service locations should be utilized for major ser-

vice and repair requirements.

• Never attempt to make major repairs on this unit unless you have

been properly trained. Improper service procedures can result in

hazardous operation, equipment damage and voiding of manufac-

turer’s warranty.

• On multiple blade mowers, take care as rotating one blade can

cause other blades to rotate.

• Do not change engine governor settings or over-speed the engine.

Operating the engine at excessive speed can increase the hazard

of personal injury.

• Disengage drive attachments, stop the engine, remove the key,

and disconnect the spark plug wire(s) before: clearing attachment

blockages and chutes, performing service work, striking an object,

or if the unit vibrates abnormally. After striking an object, inspect

the machine for damage and make repairs before restarting and

operating the equipment.

• Never place hands near the hydro pump cooling fan when the trac-

tor is running. Cooling fan is located on top of the transaxle

Safety Decals

THROTTLE

Choke

Fast

Slow

To Start Engine

When Operator Leaves Seat

Traction Control

To Operate PTO Clutch

• Seat must be occupied, ground speed control pedal in neutral,

PTO switch must be off, and clutch/brake pedal depressed.

• Put ground speed control pedal in neutral,

turn PTO switch off, and set parking brake.

• To stop tractor motion, fully depress clutch/brake pedal.

• On hydrostatic drive tractors, movement of traction pedal

from neutral, in either direction, increases ground speed.

• The operator must be in seat.

• To engage PTO, pull PTO switch up.

• To disengage PTO, push PTO switch down.

To Set Parking Brake

• Pull knob UP while clutch/brake pedal is depressed.

• Release clutch/brake pedal while holding knob.

To Release Parking Brake

• Depress clutch/brake pedal.

• Push knob DOWN while clutch/brake pedal is depressed.

Mower DOWN

Mower UP

Clutch/Brake

Pedal

PTO Switch Ignition Switch

Mower

Height

Adjust

OPERATION

DO NOT TOW TRACTOR!

Damage may result to transmission

ROTATING BLADES CUT

OFF ARMS AND LEGS

STOP MOWER WHEN

CHILDREN ARE NEAR.

NO RIDERS — THEY FALL OFF.

DANGER DANGER

OPERATING ON SLOPES

CAN BE DANGEROUS

SEE OPERATOR'S MANUAL.

IF YOU CANNOT BACK-UP

A HILL —DO NOT DRIVE ON IT.

AVOID SERIOUS INJURY OR DEATH

• Read operator's manual(s).

• Know location and function of all controls.

• Keep safety devices (guards, shields, and switches)

in place and working.

• Remove objects that could be thrown by the blade.

• Do not mow when children or others are around.

• Never carry children.

• Look down and behind before and while backing.

• Avoid sudden turns.

WARNING

• If you cannot back up a hill, do not operate on it.

• Go up and down slopes, not across.

• If machine stops going uphill, stop blade and

back down slowly.

• Be sure blade(s) and engine are stopped before

placing hands or feet near blade(s).

• When leaving machine, shut off engine, remove

key, and set parking brake.

OFF

RUN

START

Parking Brake

1716530

GENERAL

This unit has been designed and manufactured to pro-

vide you with the safety and reliability you would expect

from an industry leader in outdoor power equipment

manufacturing.

Although reading this manual and the safety instructions

it contains will provide you with the necessary basic

knowledge to operate this equipment safely and effec-

tively, we have placed several safety labels on the unit to

remind you of this important information while you are

operating your tractor.

All WARNING, CAUTION and instructional messages on

your tractor and mower should be carefully read and

obeyed. Personal bodily injury can result when these

instructions are not followed. The information is for your

safety and it is important! The safety decals below are on

your tractor and mower.

If any of these decals are lost or damaged, replace them

at once. See your local dealer for replacements.

These labels are easily applied and will act as a constant

visual reminder to you, and others who may use the

equipment, to follow the safety instructions necessary for

safe, effective operation.

TRANSMISSION RELEASE VALVE LEVER

To bypass transmission and allow manual pushing of tractor:

❶ Lift Lever Up

❷ Pull Rearward

❸ Push Down

❶

❷

❸

1717460 RG

DO NOT ACTIVATE

WHILE ENGINE IS RUNNING.

Decal - Operating Instructions

Part No. 1716530

Decal - Hydro Release Valve

Part No. 1717460

DANGER

ROTATING CUTTING BLADE

Do not put hands or feet

under mower deck while

blade is rotating.

1704276

DANGER

ROTATING CUTTING BLADE

Do not operate mower

without deflector or entire

grass catcher in place.

1704277

Decal - Danger

Part No. 1704276

Decal - Danger

Part No. 1704277

Features,

Controls & Operation

Figure 1. Tractor & Mower Controls

A. Steering Wheel

B. Throttle / Choke

C. Parking Brake Knob

D. Ignition Key/Switch

E. Headlight Switch

F. PTO (Electric Clutch) Switch

G. Mower Height Adjustment Lever

H. Brake Pedal

I. Forward Direction Pedal

J. Rear Direction Pedal

Please take a moment and

familiarize yourself with

the name, location, and

function of these controls

so that you will better under-

stand the safety and operat-

ing instructions provided in

this manual.

Operation

SAFETY INTERLOCK SYSTEM

Your tractor is equipped with a seat switch safety sys-

tem. Check the seat switch operation every fall and

spring with the following three tests.

Test 1 - Engine should NOT crank if any of

the following conditions exist:

• Transmission is out of neutral.

• PTO switch is engaged.

• Clutch/brake pedal is not fully depressed.

Test 2 - Engine should crank if ALL of the

following conditions are met:

• Transmission is in neutral.

• PTO switch is disengaged.

• Clutch/brake pedal is fully depressed.

Test 3 - Engine should shut off if any of the

following conditions exist:

• Operator rises off seat with transmission in gear and

the clutch/brake pedal not fully depressed, and the

parking brake is not set.

• Operator rises off seat with clutch/brake pedal not

depressed;

• Operator rises off seat with PTO engaged.

NOTE: Once the engine has stopped, the PTO Switch

(F, Figures 1 & 2) must be turned off after operator

returns to the seat in order to start the engine.

GENERAL

Before first time operation, drive in an open area without

mowing, to become accustomed to the unit. Be sure to

read all information in the Safety and Operation sections

before attempting to operate this tractor and mower.

DO NOT TOW TRACTOR

Towing the tractor will cause transmission

damage. Do not use another vehicle to push

or pull tractor.

WARNING

• Never allow passengers to ride on the unit.

• To reduce fire hazard, keep the engine and

mower free of grass, leaves and

excess grease.

• The interlock safety switches are for your safety.

Do not attempt to bypass them.

WARNING

If the tractor does not pass the test, do not

operate tractor. See your authorized dealer.

Under no circumstances should you attempt to

defeat the purpose of the safety system.

WARNING

Never operate on slopes greater than 30 percent

(16.7°) which is a rise of three feet vertically in 10

feet horizontally.

When operating on slopes that are greater than 15

percent (8.5°) but less than 30 percent use additional

wheel weights or counterweights when available and

applicable (see your dealer to determine which

weights —if any—are available and appropriate for

your unit).

Select slow ground speed before driving onto slope.

In addition to front and rear weights, use extra caution

when operating on slopes with rear-mounted grass

catcher.

Mow UP and DOWN the slope, never across the

face, use caution when changing directions and

DO NOT START OR STOP ON SLOPE.

Operation

CLUTCH/BRAKE PEDAL OPERATION

Depressing the brake pedal (A, Figure 2) applies the

tractor brake.

PARKING BRAKE

Parking brake can be applied by fully depressing the

brake pedal (A, Figure 2), then pulling up on the parking

brake knob (B).

STARTING THE ENGINE

1. While sitting in the operator seat, set the parking

brake.

2. Set the throttle (B, Figure 1) all the way up to

CHOKE. A warm engine may not require choking.

3. Disengage the PTO by pushing the switch all the way

down (F, Figure 1).

4. With your foot off the pedals (I & J, Figure 1) the trac-

tor is in the neutral position.

5. Insert the key into the ignition switch (D, Figure 1 & 2)

and turn it to START.

6. Move the throttle (B, Figures 1 & 2) to SLOW. Warm

up the engine by running it for at least a minute

before engaging the PTO switch or driving the tractor

CHECKS BEFORE STARTING

1. Make sure you have proper wheel or counterweights

installed if required. See Slope Operation in the

Safety Rules section. Make sure any slopes are with-

in required limits.

2. Check that crankcase is filled to full mark on dipstick.

See the engine Operator’s Manual for instructions

and oil recommendations.

3. Make sure all nuts, bolts, screws and pins are in

place and tight.

4. Make sure you can reach all controls from operator’s

positions. If not, see SEAT ADJUSTMENT.

5. Fill the gasoline tank with fresh gasoline. Fill to bot-

tom of filler neck to avoid spillage and overflow. DO

NOT mix oil with gasoline. Refer to engine manual for

gasoline recommendations.

Figure 2. Clutch/Brake Pedal Operation

A. Clutch/Brake Pedal

B. Parking Brake Knob

DRIVING THE TRACTOR

Ground speed is infinitely variable according to how far

the pedals (I & J, Figure 1) are moved in the forward or

reverse position.

1. If you are ready to mow, set the mower to the desired

cutting height (see Adjusting Mower Cutting Height)

and adjust the seat so that the controls can be easily

reached (see Seat Adjustment).

2. Set the throttle (B, Figure 1) for desired speed. Full

speed is recommended for mowing.

3. Engage the mower PTO by pulling up on the switch

(F, Figure 1).

4. Release the parking brake by depressing the brake

pedal (H, Figure 1), then press down on either pedal

(I or J, Figure 1) for the desired direction and speed

of travel.

WARNING

Gasoline is highly flammable and must be

handled with care. Never fill the tank when the

engine is still hot from recent operation. Do not

allow open flame, smoking or matches in the

area. Avoid over-filling and wipe up any spills.

WARNING

Make sure desired direction of travel is clear of

objects, people and animals.

PUSHING THE TRACTOR BY HAND

1. With engine off and key removed, disengage the

PTO by pushing the switch (F, Figure 1) all the way

down.

2. See Figure 4. The release lever is located on the rear

of the tractor. To release the transmission pull the

lever up, back and then down to lock. DO NOT

ACTIVATE WHILE ENGINE IS RUNNING.

Note: To drive the tractor the release lever must be

moved completely forward and pushed down into locked

position to engage the transmission.

Operation

Figure 3. Release Lever - Hydro Models

STOPPING THE TRACTOR

1. On hydro model, gradually take your foot off the ped-

als (I & J, Figure 1) to make a smooth stop. To make

a more rapid stop, depress the brake pedal (H, Figure

1).

On gear model, press the clutch/brake pedal (H,

Figure 2) down only far enough to disengage the

clutch to make a gradual stop. For a more rapid stop,

press pedal down fully to apply the brake.

2. Engage the parking brake by pulling up on the knob

(C, Figure 1 & 2) with the brake pedal fully

depressed.

3. Disengage the PTO by pushing down on the switch

(F, Figures 1 & 2).

4. Set engine throttle control to mid-throttle position and

turn the ignition key to off. Remove the key.

NOTE: Stopping the engine at any speed other than mid-

throttle can cause engine damage. Do not stop the

engine with the throttle control in the IDLE position.

DO NOT TOW TRACTOR

Towing the tractor will cause transmission

damage. Do not use another vehicle to push

or pull tractor.

Release Lever

WARNING

Before leaving the operator’s position for any

reason, engage the parking brake, disengage the

PTO, stop the engine and remove the key.

WARNING

To reduce fire hazard, keep the engine, tractor

and mower free of grass, leaves and excess

grease. Do not stop or park tractor over dry

leaves, grass or combustible materials.

MOWER INSTALLATION & REMOVAL

NOTE: Perform mower removal and installation on a

hard, level surface such as a concrete floor.

1. Turn the front wheels of the tractor full left.

2. Place the mower in lowest cutting position.

3. Move lever (C, Figure 5) to release belt tension, then

slide belt off of PTO pulley.

4. Remove clip (B, Figure 5) from the rod (A), and

remove the rod.

NOTE: There are two holes in the tractor U-bracket (D,

Figure 5) marked “38” and “44”. When reinstalling the

rod, use the correct hole for your deck.

5. Disconnect the front hitch by pulling out on the

release rod (B, Figure 4) and lifting the mower hitch

off the tractor hitch (A). Slide the mower deck out

from under the right side of the tractor.

6. Install the mower in reverse order of removal.

NOTE: When installing rod (A, Figure 5), turning the front

wheels slightly left or right helps to align the holes.

Figure 6. Mower Deck - Right Side

A. Pin & Clip

B. Height Adjustment Lever

Figure 5. Mower Deck - Left Side (38” Deck Shown)

A. Rod C. Lever

B. Clip D. U-Bracket

Figure 4. Front Hitch

A. Hitch B. Release Rod

3/4"- 1"with Height Adjuster Lever in lower 3 slots

2" with Height Adjuster Lever in upper 3 slots

Operation

WARNING

Engage parking brake, disengage PTO, stop

engine and remove key before attempting to

install or remove the mower.

ADJUSTING MOWER CUTTING HEIGHT &

GAUGE WHEELS

NOTE: Perform adjustment on a hard, level surface such

as a concrete floor.

1. Set the mower height adjustment lever (B, Figure 6)

to the desired cutting height.

2. Remove the pin & clip (A, Figure 6) from each mower

deck front gauge wheel.

3. Adjust the gauge wheels to achieve the appropriate

mower deck-to-ground clearance, as shown in Figure

6. Reinstall pin & clip to each wheel.

Regular

Maintenance

Before Before Every Every 25 Every 100 Spring

Safety Items First Use Each Use 5 Hours Hours Hours & Fall

Check safety interlock system. ● ●

Check tractor brakes. ● ●

Check mower blade brake. ●●

Normal Care Items

Check tractor/ mower for loose hardware. ●●

Check engine oil level.* ●●● ●

Check engine air filter.* ***●

Change engine oil and filter. *, ** ***Every 50 hrs. ***●

Lubricate tractor & mower. ***●

Lubricate rear axle shafts. Yearly

Check tire pressure. ●●

Check PTO clutch adjustment.

****

After the first 50 hours, then every 250 hours

Change transmission fluid.

****

After the first 50 hours, then every 250 hours

Check fuel filter. ●

Clean battery & cables. ●

Clean/sharpen blades. ●

Inspect or replace spark plug(s).* ●

* See the engine manufacturer's owner's manual.

** Change original engine oil after first 5 hours of operation.

*** More often in hot (over 85° F: 30° C) weather or dusty operating conditions.

**** Service after the first 50 hours, then every 250 hours.

MAINTENANCE SCHEDULE

The following schedule should be followed for normal care of your tractor and mower. You will need to keep a record

of your operating time. Determining operating time is easily accomplished by multiplying the time it takes to do one

job by the number of times you’ve done the job, or you can install the optional hour meter.

Tire Pressure

Front

12 - 15 psi (82 - 103 kPa)

Rear

10 - 12 psi (56 - 82 kPa)

TIRE PRESSURE

Tire pressure should be checked periodically, and main-

tained at the levels shown in the chart at right. Note that

these pressures differ slightly from the “Max Inflation”

stamped on the side-wall of the tires. The pressures

shown in the chart provide proper traction, improved cut

quality, and extended tire life.

Regular Maintenance

CHECKING AND ADDING GASOLINE

Raise the hood and check the fuel tank (B, Figure 8) to

be sure there is enough gasoline to complete the job. To

add gasoline, remove the gas cap. Do not overfill. Leave

room in the tank for fuel expansion. Refer to your engine

manual for gasoline recommendations.

CHECKING FUEL FILTER

The fuel filter (C, Figure 8) is located in fuel line between

fuel tank and carburetor. If filter is dirty or clogged,

replace as follows. Place a container below filter to catch

spilled gasoline.

1. Using a pliers, open and slide hose clamps from fuel

filter.

2. Remove hoses from filter.

3. Install new filter in proper flow direction in fuel line.

Secure with hose clamps. See warning at beginning

of procedure.

OIL & FILTER CHANGE

Refer to engine manual for specific oil and filter recom-

mendations and oil draining procedures. Both the oil fil-

ter and oil drain valve are located on the left side of the

engine. To open the drain valve turn the fitting counter-

clockwise with a 10 mm wrench.

Figure 8. Engine Compartment

A. Oil Fill D. Air Filter

B. Gas Tank E. Spark Plug

C. Fuel Filter

CAUTION

Never use gasoline containing METHANOL,

gasohol containing more than 10% ethanol,

gasoline additives, premium gasoline, or white

gas because engine/fuel system damage could

result.

WARNING

Do not remove fuel filter when engine is hot, as

spilled gasoline may ignite. DO NOT spread hose

clamps further than necessary. Ensure clamps

grip hoses firmly over filter after installation.

CHECK / CHANGE AIR FILTER

Refer to the engine manual for specific air filter service

procedures. Refer to Figure 8 for air filter location.

REPLACE SPARK PLUG

Refer to the engine manual for specific spark plug

replacement procedures. Refer to Figure 8 for spark

plug location.

Figure 7. Gas Tank Located Under Hood

Hood recess

RAISING THE HOOD & SEAT

1. To raise the hood, grasp the hood recess (Figure 7)

on top, then pivot the hood up and forward.

2. To raise the seat for battery access, tilt the seat for-

ward.

CAUTION

Do not run the engine with the hood raised.

Engine heat will cause damage to the headlight

bezel and hood.

Page is loading ...

Simplicity REGENT / 500 / 2500 SERIES (TT) User manual

Brand: Simplicity

Model: REGENT / 500 / 2500 SERIES (TT)

Category: Lawnmowers

Type: User manual

This manual is also suitable for

Download PDF

report

Simplicity REGENT / 500 / 2500 SERIES (TT) User manual

This manual is also suitable for

Simplicity REGENT / 500 / 2500 SERIES (TT) User manual

Related papers

Other documents