ww w.qlight.com
SAB130/200
Thank you for purchasing Qlight product. Please read this manual
carefully before installing this product for safe and long use.
▪ Performing stable movement at vessel or large-scale plant where exists
severe vibration and strong impact by adopting a special structure of
solenoid striking bell.
▪ Taking a nice material bell housing which can maintain a clear bell
sound.
▪ Having a high durability with a strong structure for a vibration and
impact.
▪ Easy wiring and repair-maintenance due to the attached terminal box.
▪ Transmitting visual signal and audible signal simultaneously by the bell
and pilot lamp.
▪ Bell and pilot lamp are interlocked but can be operated separately.
▪ Material: Bell- STEEL, Housing-ABS
▪ Protection Class: IP56
▪ Cable entry : Standard - PG19*1EA, Customization - PG19*2EA
▪ Frequency : 1400 Hz ▪ Volume(Max.) : 90dB at 1m
Model
Voltage
Current
Weight
Sound
Standard color
SAB130
SAB200
DC24V
1.377A
1.80Kg
2.00Kg
95dB
at 1m
* Housing-Maker's
Standard Color
* Bell/Lamp-Red
AC110V
0.166A
AC220V
0.116A
▪ Technical Diagram-SAB130
▪ Technical Diagram-SAB200
Power line is inside of terminal box, please use this power line to
connect.
1) Connect power line
▪ Connect power line at terminal box① and come out through CABLE
ENTRY② or Back side CABLE ENTRY ③.
▪ In case of product using AC voltage, connect the line without Polarity
(wire color).
▪ In case of product using DC voltage, black line is negative (-).
2) Treating Power Cable Entry
▪ Use cable grand to the line entry to keep airtight. If the line entry is not
kept airtight and put outdoor, this can cause a product damage by
moisture and dust.
▪ This product is manufactured for outdoor use. Mount at the place where
exists low moisture and low dust as long as possible on vertical right
direction.
OPERATING MANUAL
ALARM BELL WITH PILOT LAMP
1
Product Features
2
Specification
3
Technical Diagram
4
Structure Drawing
5
Wiring Instructions
ww w.qlight.com
▪ Refer to below information and drill necessary mounting holes
on profitable part of the product. (Make sure PCD from external view
drawing.)
▪ Fix the product by using extra mounting bolt(M8-3EA).
.
▪ This is designed for explosion proof and water proof/dust proof product.
When releasing the product for checking, connecting etc, must keep
airtight by making sure bolts.
▪ Use explosion-proof cable grand to keep airtight which is satisfied with
explosion-proof regulation. If the line entry is not kept airtight and put
outdoor, this can cause product damage by moisture and dust.
▪ If using voltage is seriously higher or lower than rated voltage, it can
reduce the self-life of the product or can cause a problem on product
operating. Make sure the using voltage does not exceed +/-5% of the
rated voltage.
▪ If Bell or body of the product is contaminated by chemicals such as
thinner, benzene, the product can be damaged, discolored or deformed.
Please be careful.
Situation
Main reason
Solution
Feeble lighting
Supplying voltage lower
than rated voltage
Check using voltage
No light or
Bell no working
Wrong wiring
Check wiring
No power supply
Check power supply
2
6
Caution
7
Trouble Shooting
QLIGHT CO., LTD.
http://www.qlight.com
E-mail : trade@qlight.com
Overseas Marketing Team / Factory
Tel) +82-55-328-4082 Fax) +82-55-328-3883
185-25 Mukbang-ro Sangdong-Myun, Gimhae-Si,
Gyeongsangnam-do, Korea
Inquiry for Product and C/S
/
