The Swan Corporation
•
515 Olive Street, Suite 1800
•
St. Louis, MO 63101
•
p (800)325-7008
•
f (314)231-8165
•
swanstone.com90 The Swan Corporation
•
515 Olive Street, Suite 1800
•
St. Louis, MO 63101
•
p (800)325-7008
•
f (314)231-8165
•
swanstone.com 91
T U B & S H OW E R
TI-NEO-DTF SwanTile Shower Wall Kit
SWANTILE SHOWER WALL KITS
WARRANTY
Limited Lifetime – Residential
Limited 5-year – Commercial
Manufactured from Veritek
®
(see page 2 for detailed information)
S P E C I F I C AT I O N S
TI-NEO-DTF SwanTile Shower Wall Kit
Wall Area Ship Ship Carton
Model Part Designed To Fit Wt. Lb. UPS Dims. In. Cu. Ft.
TI-NEO-DTF NE00000TI 36"x 36" to 38" x 38" 57 – 73 x 32 x 8 10.82
x 71-5/8" H
(914 mm x 914 mm to 965 mm x 965 mm x 1819 mm)
Kit Includes: One back panel with molded-in shelves, two side panels,
two apron strips, installation materials and complete installation instructions.
Packaging: Each kit is packed in a flat, rectangular carton.
S U P P O R T D O C U M E N T S
Installation instructions available on line at www.swanstone.com
TI-NEO-DTF
Designed to fit wall areas
36" x 36" to 38" x 38" x 71-5/8" high
(914 mm x 914 mm to 965 mm x 965 mm x 1819 mm)
F E AT U R E S
• Elegant look of ceramic tile with no
grout to clean
• Compression molded Veritek is a
composite material with no surface
coating to chip or crack
• For use with Swanstone, Veritek and
other standard shower floors
• The TI-NEO-DTF is a glue-up 3-piece
shower wall panel system
• White (010)
• Bone (037)
• Bisque (018)
71-5/8"
9"
9"
29-3/4"
28"
83"
5-1/2"
wide
soap
dish
S TA N D A R D S A N D R AT I N G S
Class B fire rating
American Society for Testing and Materials
National Electrical Manufacturers Association
TI-NEO-DTF
CO L O R S
(See inside back cover for color sample.)
M A I N T E N A N C E A N D
C L E A N I N G I N F O R M AT I O N
Wash regularly with non-abrasive, liquid
cleaners, a sponge, soft cloth or Mr. Clean
Magic Eraser. For hard water stains or
mineral build-up, scale removers such
as Lime Away, Rust-out or Whink can be
used. To protect the finish, fiberglass
wax or automotive paste wax can be
applied.
Do not
use abrasive cleaners
or pads.
Do not
use “leave on” cleaning
products such as the Automatic Shower
Cleaner. Prolonged contact with harsh
chemicals could have an adverse reactive
over time and discolor your surfaces.
Do not
use cleaning agents that caution
use on acrylic, polyester or plastics.
TI-7260 SwanTile Shower Wall Kit
SWANTILE SHOWER WALL KITS
WARRANTY
Limited Lifetime – Residential
Limited 5-year – Commercial
Manufactured from Veritek
®
(see page 2 for detailed information)
S P E C I F I C AT I O N S
TI-7260 SwanTile Shower Wall Kit
Wall Area Ship Ship Carton
Model Part Designed To Fit Wt. Lb. UPS Dims. In. Cu. Ft.
TI-7260 TI07260 31" – 36" D x 95 – 73 x 55 x 6 13.94
53-1/4" – 64-3/4 W x 71-5/8" H
(787 mm – 914 mm x 1314 mm – 1645 mm x 1819 mm)
Kit Includes: One back panel with molded-in soap dish, two corner panels,
two side panels, installation materials and complete installation instructions.
Packaging: Each kit is packed in a flat, rectangular carton.
S U P P O R T D O C U M E N T S
Installation instructions available on line at www.swanstone.com
TI-7260
Designed to fit wall areas
31" – 36" deep x 53-1/4" – 64-3/4" wide x 71-5/8" high
(787 mm – 914 mm x 1314 mm – 1645 mm x 1819 mm)
F E AT U R E S
• Elegant look of ceramic tile with no
grout to clean
• Compression molded Veritek is a
composite material with no surface
coating to chip or crack
• For use with Swanstone, Veritek and
other standard shower floors
• The TI-7260 is a glue-up 5-piece
shower wall panel system
• White (010)
• Bone (037)
• Bisque (018)
TI-7260
51-11/16"
71-5/8"
5"
7"
29-3/4"
19"
56-5/8"
7"
S TA N D A R D S A N D R AT I N G S
Class B fire rating
American Society for Testing and Materials
National Electrical Manufacturers Association
CO L O R S
(See inside back cover for color sample.)
M A I N T E N A N C E A N D
C L E A N I N G I N F O R M AT I O N
Wash regularly with non-abrasive, liquid
cleaners, a sponge, soft cloth or Mr. Clean
Magic Eraser. For hard water stains or
mineral build-up, scale removers such
as Lime Away, Rust-out or Whink can be
used. To protect the finish, fiberglass
wax or automotive paste wax can be
applied.
Do not
use abrasive cleaners
or pads.
Do not
use “leave on” cleaning
products such as the Automatic Shower
Cleaner. Prolonged contact with harsh
chemicals could have an adverse reactive
over time and discolor your surfaces.
Do not
use cleaning agents that caution
use on acrylic, polyester or plastics.