KTM 390 Duke 2015 Owner's manual

OWNER'S MANUAL 2015

390 Duke EU

390 Duke AU

390 Duke JP

390 Duke ASIA

390 Duke BR

390 Duke CN

390 Duke MY

Art. no. 3213281en

DEAR KTM CUSTOMER 1

DEAR KTM CUSTOMER

Congratulations on your decision to purchase a KTM motorcycle. You are now the owner of a state-of-the-art sports motorcycle that will

give you enormous pleasure if you service and maintain it accordingly.

We wish you a lot of enjoyment in riding this vehicle.

Enter the serial numbers of your vehicle below.

Chassis number ( p. 20) Dealer's stamp

Engine number ( p. 21)

Key number ( p. 21)

The Owner's Manual contained the latest information for this model series at the time of going to print. Minor differences due to develop-

ments in design cannot be ruled out completely.

All specifications are non-binding. KTM Sportmotorcycle GmbH specifically reserves the right to modify or delete technical specifications,

prices, colors, forms, materials, services, designs, equipment, etc., without prior notice and without specifying reasons, to adapt these to

local conditions, as well as to stop production of a particular model without prior notice. KTM accepts no liability for delivery options, devi-

ations from illustrations and descriptions, misprints, and other errors. The models portrayed partly contain special equipment that does not

belong to the regular scope of supply.

Reproduction, even in part, as well as copying of all kinds, is permitted only with the express written permission of the copyright owner.

DEAR KTM CUSTOMER 2

ISO 9001(12 100 6061)

According to the international quality management standard ISO 9001, KTM uses quality assurance processes that lead to

the maximum possible quality of the products.

Issued by: TÜV Management Service

KTM Sportmotorcycle GmbH

5230 Mattighofen, Austria

TABLE OF CONTENTS 3

TABLE OF CONTENTS

1 MEANS OF REPRESENTATION ........................................ 7

1.1 Symbols used ...................................................... 7

1.2 Formats used....................................................... 8

2 SAFETY ADVICE.............................................................. 9

2.1 Use definition...................................................... 9

2.2 Safety advice....................................................... 9

2.3 Degrees of risk and symbols................................ 10

2.4 Tampering warning............................................. 10

2.5 Safe operation ................................................... 11

2.6 Protective clothing ............................................. 12

2.7 Work rules......................................................... 12

2.8 Environment...................................................... 12

2.9 Owner's Manual ................................................. 13

3 IMPORTANT NOTES...................................................... 14

3.1 Guarantee, warranty ........................................... 14

3.2 Operating and auxiliary substances ...................... 14

3.3 Spare parts, accessories ..................................... 14

3.4 Service ............................................................. 14

3.5 Figures ............................................................. 15

3.6 Customer service................................................ 15

4 VIEW OF VEHICLE ........................................................ 16

4.1 View of vehicle, front left (example) ..................... 16

4.2 View of vehicle, rear right (example) .................... 18

5 SERIAL NUMBERS ....................................................... 20

5.1 Chassis number ................................................. 20

5.2 Type label ......................................................... 20

5.3 Engine number .................................................. 21

5.4 Key number....................................................... 21

6 CONTROLS................................................................... 22

6.1 Clutch lever....................................................... 22

6.2 Hand brake lever................................................ 22

6.3 Throttle grip ...................................................... 23

6.4 Horn button....................................................... 23

6.5 Light switch ...................................................... 24

6.6 High beam flasher button ................................... 24

6.7 Turn signal switch.............................................. 25

6.8 Emergency OFF switch ....................................... 25

6.9 Electric starter button......................................... 26

6.10 Ignition/steering lock.......................................... 26

6.11 Locking the steering........................................... 27

6.12 Unlocking the steering........................................ 27

6.13 Combination instrument ..................................... 28

6.13.1 Overview ....................................................... 28

6.13.2 Activation and test......................................... 29

6.13.3 Warning notes ............................................... 30

6.13.4 Function buttons ........................................... 33

6.13.5 Indicator lamps ............................................. 34

6.13.6 Display ......................................................... 35

6.13.7 Filling level display in fuel tank....................... 36

6.13.8 TRIP F display............................................... 37

6.13.9 Coolant temperature indicator ......................... 38

6.13.10 Info display ................................................... 39

6.13.11 Riding time/average speed menu..................... 40

6.13.12 Average speed/average fuel consumption 1

menu............................................................ 40

6.13.13 Average fuel consumption 1/average fuel

consumption 2 menu ..................................... 41

TABLE OF CONTENTS 4

6.13.14 Average fuel consumption 2/service menu ........ 42

6.13.15 Service/range menu........................................ 43

6.13.16 Range/riding time menu ................................. 44

6.13.17 Total distance menu ODO ............................... 45

6.13.18 Distance menu 1 TRIP 1 ................................ 45

6.13.19 Distance menu 2 TRIP 2 ................................ 46

6.13.20 Setting kilometers or miles ............................. 46

6.13.21 Setting the time............................................. 47

6.13.22 Adjusting the shift speed RPM 1 ..................... 48

6.13.23 Adjusting the shift speed RPM 2 ..................... 48

6.14 Opening the filler cap......................................... 49

6.15 Closing the filler cap .......................................... 51

6.16 Seat lock........................................................... 51

6.17 Tool set............................................................. 52

6.18 Grab handles ..................................................... 52

6.19 Passenger footrests ............................................ 53

6.20 Shift lever ......................................................... 53

6.21 Foot brake lever ................................................. 54

6.22 Side stand......................................................... 55

7 PREPARING FOR USE................................................... 56

7.1 Advice on first use ............................................. 56

7.2 Running in the engine ........................................ 57

7.3 Loading the vehicle............................................ 58

8 RIDING INSTRUCTIONS................................................ 60

8.1 Checks and maintenance when preparing for

use................................................................... 60

8.2 Starting............................................................. 61

8.3 Starting off........................................................ 63

8.4 Shifting, riding .................................................. 63

8.5 Applying the brakes............................................ 66

8.6 Stopping, parking............................................... 68

8.7 Transport .......................................................... 69

8.8 Refueling .......................................................... 70

9 SERVICE SCHEDULE .................................................... 72

9.1 Service schedule................................................ 72

10 TUNING THE CHASSIS ................................................. 74

10.1 Adjusting the spring preload of the shock

absorber ........................................................ 74

10.2 Adjusting the shift lever...................................... 75

11 SERVICE WORK ON THE CHASSIS................................. 76

11.1 Raising the motorcycle with the rear wheel

stand ................................................................ 76

11.2 Taking the motorcycle off of the rear wheel

stand ................................................................ 76

11.3 Raising the motorcycle with the front wheel

stand ................................................................ 77

11.4 Taking the motorcycle off of the front wheel

stand ................................................................ 78

11.5 Removing the passenger seat .............................. 79

11.6 Mounting the passenger seat............................... 80

11.7 Removing the seat ............................................. 80

11.8 Mounting the seat .............................................. 81

11.9 Checking for chain dirt accumulation................... 82

11.10 Cleaning the chain ............................................. 82

11.11 Checking the chain tension ................................. 83

11.12 Adjusting the chain tension................................. 84

11.13 Checking the chain, rear sprocket, and engine

sprocket............................................................ 86

11.14 Removing the front spoiler .................................. 90

TABLE OF CONTENTS 5

11.15 Fitting front spoiler ............................................ 91

12 BRAKE SYSTEM ........................................................... 92

12.1 ABS/antilock brake system.................................. 92

12.2 Checking the brake discs .................................... 93

12.3 Checking the brake fluid level of the front brake ... 94

12.4 Adding front brake fluid .................................. 95

12.5 Checking the front brake linings .......................... 96

12.6 Checking the free travel of foot brake lever ........... 97

12.7 Adjusting the free travel of the foot brake

lever .............................................................. 98

12.8 Checking the rear brake fluid level....................... 99

12.9 Adding rear brake fluid ................................. 100

12.10 Checking the rear brake linings ......................... 102

13 WHEELS, TIRES ......................................................... 103

13.1 Removing the front wheel .............................. 103

13.2 Installing the front wheel .............................. 104

13.3 Removing the rear wheel ............................... 106

13.4 Installing the rear wheel ................................ 107

13.5 Checking the rear hub rubber dampers ........... 108

13.6 Checking the tire condition ............................... 110

13.7 Checking the tire air pressure............................ 111

14 ELECTRICAL SYSTEM ................................................. 113

14.1 Removing the battery .................................... 113

14.2 Installing the battery ..................................... 114

14.3 Recharging the battery .................................. 115

14.4 Changing the ABS fuses ................................... 118

14.5 Changing the fuses of individual power

consumers....................................................... 119

14.6 Changing the headlight bulb ............................. 121

14.7 Changing the parking light bulb......................... 124

14.8 Checking the headlight setting .......................... 128

14.9 Adjusting the headlight range............................ 129

15 COOLING SYSTEM ...................................................... 132

15.1 Cooling system ................................................ 132

15.2 Checking the antifreeze and coolant level........... 133

15.3 Checking the coolant level ................................ 135

15.4 Draining the coolant ..................................... 137

15.5 Filling/bleeding the cooling system ................. 138

16 TUNING THE ENGINE................................................. 140

16.1 Checking the play in the throttle cable ............... 140

16.2 Adjusting the play in the throttle cable ........... 141

16.3 Checking the clutch lever play........................... 141

16.4 Adjusting the clutch cable play ...................... 142

17 SERVICE WORK ON THE ENGINE ................................ 143

17.1 Checking the engine oil level............................. 143

17.2 Changing the engine oil and oil filter, cleaning

the oil screens ............................................. 143

17.3 Adding engine oil............................................. 146

18 CLEANING, CARE ....................................................... 148

18.1 Cleaning the motorcycle ................................... 148

18.2 Checks and maintenance steps for winter

operation......................................................... 150

19 STORAGE................................................................... 152

19.1 Storage ........................................................... 152

19.2 Preparing for use after storage........................... 153

20 TROUBLESHOOTING .................................................. 154

21 TECHNICAL DATA....................................................... 157

21.1 Engine............................................................ 157

TABLE OF CONTENTS 6

21.2 Engine tightening torques ................................. 158

21.3 Capacities ....................................................... 161

21.3.1 Engine oil ................................................... 161

21.3.2 Coolant....................................................... 161

21.3.3 Fuel ........................................................... 161

21.4 Chassis ........................................................... 161

21.5 Electrical system.............................................. 163

21.6 Tires............................................................... 163

21.7 fork ................................................................ 164

21.8 Shock absorber................................................ 164

21.9 Chassis tightening torques ................................ 164

22 SUBSTANCES ............................................................ 170

23 AUXILIARY SUBSTANCES ........................................... 172

24 STANDARDS .............................................................. 174

INDEX ............................................................................... 175

1 MEANS OF REPRESENTATION 7

1.1 Symbols used

The meaning of specific symbols is described below.

Indicates an expected reaction (e.g. of a work step or a function).

Indicates an unexpected reaction (e.g. of a work step or a function).

All work marked with this symbol requires specialist knowledge and technical understanding. In the interest of your

own safety, have these jobs performed by an authorized KTM workshop. There, your motorcycle will be optimally

cared for by specially trained experts using the specialist tools required.

Indicates a page reference (more information is provided on the specified page).

Indicates information with more details or tips.

Indicates the result of a testing step.

1 MEANS OF REPRESENTATION 8

1.2 Formats used

The typographical formats used in this document are explained below.

Specific name Identifies a proprietary name.

Name

®

Identifies a protected name.

Brand™ Identifies a brand available on the open market.

Underlined terms Refer to technical details of the vehicle or indicate technical terms, which are explained in

the glossary.

2 SAFETY ADVICE 9

2.1 Use definition

KTM sport motorcycles are designed and constructed to meet the normal demands of regular road operation but not for use on race

courses or offroad.

Info

The motorcycle is authorized for public road traffic in the homologous version only.

2.2 Safety advice

A number of safety instructions need to be followed to operate the vehicle safely. Therefore, read this manual carefully. The safety instruc-

tions are highlighted in the text and are referred to at the relevant passages.

Info

The vehicle has various information and warning labels at prominent locations. Do not remove information/warning labels. If they

are missing, you or others may not recognize dangers and may therefore be injured.

2 SAFETY ADVICE 10

2.3 Degrees of risk and symbols

Danger

Indicates a danger that will immediately and invariably lead to fatal or serious permanent injury if the appropriate measures are not

taken.

Warning

Indicates a danger that is likely to lead to fatal or serious injury if the appropriate measures are not taken.

Caution

Indicates a danger that may lead to minor injuries if the appropriate measures are not taken.

Note

Indicates a danger that will lead to considerable machine and material damage if the appropriate measures are not taken.

Warning

Indicates a danger that will lead to environmental damage if the appropriate measures are not taken.

2.4 Tampering warning

Tampering with the noise control system is prohibited. Federal law prohibits the following acts or the causing thereof:

1 The removal or rendering inoperative by any person other than for purposes of maintenance, repair, or replacement, of any device or

element of design incorporated into any new vehicle for the purpose of noise control prior to its sale or delivery to the ultimate pur-

chaser or while it is in use, or

2 the use of the vehicle after such device or element of design has been removed or rendered inoperative by any person.

Among those acts presumed to constitute tampering are the acts listed below:

2 SAFETY ADVICE 11

1 Removal or puncturing of the main silencer, baffles, header pipes or any other components which conduct exhaust gases.

2 Removal or puncturing of parts of the intake system.

3 Lack of proper maintenance.

4 Replacing moving part of the vehicle, or parts of the exhaust or intake system, with parts other than those specified by the manufac-

turer.

2.5 Safe operation

Danger

Danger of accidents Danger arising from the rider's judgement being impaired.

– Do not operate the vehicle while under the influence of alcohol, drugs and certain medications or physically or mentally

impaired.

Danger

Danger of poisoning Exhaust gases are toxic and inhaling them may result in unconsciousness and/or death.

– When running the engine, always make sure there is sufficient ventilation, and do not start or run the engine in an enclosed

space without an effective exhaust extraction system.

Warning

Danger of burns Some vehicle components become very hot when the vehicle is operated.

– Do not touch hot components such as exhaust system, radiator, engine, shock absorber, and the brake system. Allow these

components to cool down before starting work on them.

Only operate the vehicle when it is in perfect technical condition, in accordance with its intended use, and in a safe and environmentally

compatible manner.

An appropriate driver's license is needed to ride the vehicle on public roads.

Have malfunctions that impair safety promptly eliminated by an authorized KTM workshop.

Adhere to the information and warning labels on the vehicle.

2 SAFETY ADVICE 12

2.6 Protective clothing

Warning

Risk of injury Missing or poor protective clothing presents an increased safety risk.

– Wear protective clothing (helmet, boots, gloves, pants and jacket with protectors) every time you ride the vehicle. Always wear

protective clothing that is in good condition and meets the legal requirements.

In the interest of your own safety, KTM recommends that you only operate the vehicle while wearing protective clothing.

2.7 Work rules

Special tools are necessary for certain tasks. The tools are not contained in the vehicle but can be ordered under the number in parenthe-

ses. E.g.: bearing puller (15112017000)

During assembly, non-reusable parts (e.g. self-locking screws and nuts, seals and seal rings, O-rings, pins, lock washers) must be replaced

by new parts.

In some instances, a thread locker (e.g. Loctite

®

) is required. The manufacturer instructions for use must be followed.

After disassembly, clean the parts that are to be reused and check them for damage and wear. Change damaged or worn parts.

After you complete the repair or service work, check the operating safety of the vehicle.

2.8 Environment

If you use your motorcycle responsibly, you can ensure that problems and conflicts do not occur. To protect the future of the motorcycle

sport, make sure that you use your motorcycle legally, display environmental consciousness, and respect the rights of others.

When disposing of used oil, other operating and auxiliary fluids, and used components, comply with the laws and regulations of the

respective country.

Because motorcycles are not subject to the EU regulations governing the disposal of used vehicles, there are no legal regulations that per-

tain to the disposal of an end-of-life motorcycle. Your authorized KTM dealer will be glad to advise you.

2 SAFETY ADVICE 13

2.9 Owner's Manual

It is important that you read this Owner's Manual carefully and completely before making your first trip. The Owner's Manual contains use-

ful information and many tips on how to operate, handle, and maintain your motorcycle. Only then will you find out how to customize the

vehicle ideally for your own use and how you can protect yourself from injury.

Keep the Owner's Manual in an accessible place to enable you to refer to it as needed.

If you would like to know more about the vehicle or have questions on the material you read, please contact an authorized KTM dealer.

The Owner's Manual is an important component of the vehicle and should be handed over to the new owner if the vehicle is sold.

3 IMPORTANT NOTES 14

3.1 Guarantee, warranty

The work prescribed in the service schedule must be carried out by an authorized KTM workshop only and confirmed in the customer's

Service & Warranty Booklet and in the KTM Dealer.net; otherwise, all warranty claims will be void. No warranty claims can be considered

for damage resulting from manipulations and/or alterations to the vehicle.

Additional information on the guarantee or warranty and the procedures involved can be found in the Service & Warranty Booklet.

3.2 Operating and auxiliary substances

Warning

Environmental hazard Improper handling of fuel is a danger to the environment.

– Do not allow fuel to get into the ground water, the ground, or the sewage system.

Use operating and auxiliary substances (such as fuel and lubricants) as specified in the Owner's Manual.

3.3 Spare parts, accessories

For your own safety, only use spare parts and accessory products that are approved and/or recommended by KTM and have them installed

by an authorized KTM workshop. KTM accepts no liability for other products and any resulting damage or loss.

Certain spare parts and accessory products are specified in parentheses in the descriptions. Your authorized KTM dealer will be glad to

advise you.

The current KTM PowerParts for your vehicle can be found on the KTM website.

International KTM Website: http://www.ktm.com

3.4 Service

A prerequisite for perfect operation and prevention of premature wear is that the service, care, and tuning work on the engine and chassis

is properly carried out as described in the Owner's Manual. Incorrect adjustment and tuning of the engine and chassis can lead to damage

and breakage of components.

3 IMPORTANT NOTES 15

Use of the vehicle under difficult conditions, such in rain, high heat or with a heavy load, can lead to considerably more rapid wear of

components such as the drive train, brake system, or suspension components. For this reason, it may be necessary to inspect or replace

parts before the next scheduled service.

It is imperative that you adhere to the stipulated run-in times and service intervals. If you observe these exactly, you will ensure a much

longer service life for your motorcycle.

3.5 Figures

The figures contained in the manual may depict special equipment.

In the interest of clarity, some components may be shown disassembled or may not be shown at all. It is not always necessary to disassem-

ble the component to perform the activity in question. Please follow the instructions in the text.

3.6 Customer service

Your authorized KTM dealer will be happy to answer any questions you may have on your vehicle and KTM.

A list of authorized KTM dealers can be found on the KTM website.

International KTM Website: http://www.ktm.com

4 VIEW OF VEHICLE 16

4.1 View of vehicle, front left (example)

M00703-10

4 VIEW OF VEHICLE 17

1 Combination instrument

2 Rear mirror

3 Clutch lever ( p. 22)

4 Seat

5 Passenger seat

6 Seat lock ( p. 51)

7 Grab handles ( p. 52)

8 Engine number ( p. 21)

9 Side stand ( p. 55)

10 Shift lever ( p. 53)

4 VIEW OF VEHICLE 18

4.2 View of vehicle, rear right (example)

M00704-10

Page is loading ...

KTM 390 Duke 2015 Owner's manual

KTM 390 Duke 2015 Owner's manual

Related papers

Other documents