OKI B411D Owner's manual

Page is loading ...

3

Table of Contents

Check Package Contents . . . . . . . . . . . . 4

Prepare a Location . . . . . . . . . . . . . . . . . 4

Set Up the Printer . . . . . . . . . . . . . . . . . 4

Prepare the Image Drum Cartridge . . . . . 4

Install the Toner Cartridge . . . . . . . . . . . 6

Load Paper . . . . . . . . . . . . . . . . . . . . . . 7

Insert Power Cable. . . . . . . . . . . . . . . . . 8

Computer Connection. . . . . . . . . . . . . . . 8

Windows Setup . . . . . . . . . . . . . . . . . . . 9

Macintosh Setup . . . . . . . . . . . . . . . . . 10

Service and Support. . . . . . . . . . . . . . . 11

Table des matiéres

Vérification du contenu de l’emballage . . 12

Préparation d'un emplacement . . . . . . . 12

Configuration de l'imprimante . . . . . . . . 12

Préparation de la cartouche de

tambour d’image . . . . . . . . . . . . . . . . 13

Installation de la cartouche de toner . . . 14

Chargement du papier . . . . . . . . . . . . . 15

Installation du cordon d’alimentation . . . 16

Connexion à l'ordinateur. . . . . . . . . . . . 16

Installation sous Windows. . . . . . . . . . . 17

Installation sous Macintosh . . . . . . . . . . 19

Service et soutien . . . . . . . . . . . . . . . . 20

Contenido

Verifique el contenido de la caja . . . . . . 21

Prepare el lugar . . . . . . . . . . . . . . . . . . 21

Instale la impresora . . . . . . . . . . . . . . . 21

Preparar el Cartucho de cilindro

de imagen . . . . . . . . . . . . . . . . . . . . . 22

Instalar cartucho de tóner. . . . . . . . . . . 23

Cargar papel . . . . . . . . . . . . . . . . . . . . 24

Conectar el cable de alimentación . . . . . 25

Conexión a la computadora. . . . . . . . . . 25

Procedimientos de Windows . . . . . . . . . 26

Procedimientos de Macintosh . . . . . . . . 28

Assistencia Técnica y Soporte . . . . . . . . 29

Sumário

Inspecione o conteúdo da embalagem . . 30

Prepare o local de instalação . . . . . . . . . 30

Instale a impressora . . . . . . . . . . . . . . 30

Prepare o cartucho do cilindro OPC . . . . 31

Instale o cartucho de toner . . . . . . . . . . 32

Coloque o papel. . . . . . . . . . . . . . . . . . 33

Insira o cabo de alimentação. . . . . . . . . 34

Conexão do computador . . . . . . . . . . . . 34

Configuração do Windows . . . . . . . . . . . 35

Configuração do Macintosh . . . . . . . . . . 37

Assistência ténica e suporte . . . . . . . . . 37

English 4

Printer Setup

Check Package Contents

1 Printer

2 CD-ROM

3 Power Cable

4 Toner Cartridge

• Black light-shield bag, to protect drum/toner

cartridge if unit is shipped (not shown)

• This Setup Guide (not shown)

• Safety, Warranty, Regulatory Information booklet

(not shown)

Note: We recommend you keep your packing

materials and carton in case you need to

ship or transport the unit.

Prepare a Location

Note: Space requirements are approximate.

Set Up the Printer

Lift the printer and place it on the selected

location. The printer weighs approximately 24

lbs.

IMPORTANT!

Other safety information is contained in the

Safety, Warranty and Regulatory Information

booklet supplied with this product and should be

read prior to setting up the printer.

1 Remove all shipping tape.

2 Remove any packing materials.

Prepare the Image Drum

Cartridge

1 Press button and lift the top cover.

English 5

2 Lift the drum cartridge from printer.

Note: Do not expose cartridge to light for more

than 5 minutes.

Note: Do not touch shiny green surface at

bottom of drum cartridge.

3 Lift tape, then pull out protective paper as

shown below. Lift out and discard shipping

restraints.

4 Reinstall drum cartridge in the printer:lower it

into place in the printer locating the pegs (1)

at each end into their slots in the sides of the

printer cavity (2).

English 6

Install the Toner

Cartridge

1 Unpack the toner cartridge.

2 Shake the cartridge several times vertically

and horizontally to distribute toner.

3 Holding the cartridge in a horizontal position,

slowly peel off the tape.

4 Hold the cartridge with the (blue) knob (1) on

the right. Tilt the cartridge slightly and insert

the left side under the protrusions (2) on the

image drum cartridge.

5 Lower the right side, aligning the slot in the

toner cartridge with the guide post of the

image drum. Push the toner cartridge down

completely until it snaps into place.

6 Holding the toner cartridge down so it does not

pop up, turn the knob in the direction show.

Note: The arrow on the knob should align with

the arrow on the drum cartridge.

7 Close the top cover.

English 7

Load Paper

1 Pull out the paper tray.

2 Set guides to paper width and paper length.

Note: For legal size paper, slide the release

lever to the left while pulling out the

paper guide to the LGL position.

3 Load paper (face down and top edge towards

the front for letterhead paper). Be sure guides

are snug against the paper and are locked in

place. Close the paper tray.

English 8

Insert Power Cable

Insert the power cable.

Note: Do NOT turn the printer on.

WARNING!

Be sure to use the 15A AC power cord supplied

with the printer. Use of a power cord NOT

supplied with this printer, or an extension cord,

may result in overheating, and could be a safety

hazard.

CAUTION!

To prevent fire or shock hazards, connect

the power plug only to a properly rated

power outlet.

Do not connect this product to an

uninterruptible power supply (UPS). For

further information please contact Oki Data

at 1-800-OKIDATA or www.okidata.com.

Computer Connection

Note: Interface cables are not supplied.

Network Connection

Connect the network cable between the printer

network port and the Ethernet hub or router.

USB Connection

Note: If installing for Windows© with USB

connection, install the software BEFORE

installing the USB cable. See “Software

Installation” on page 9.

Connect the USB cable between the printer USB

port and the computer.

Parallel Connection

Note: Requires UL approved bi-directional (IEEE

1284 compliant) cable.

Connect the Parallel cable between the printer’s

Parallel port and the computer.

English 9

Software

Installation

Windows Setup

Models B411dn and B431dn:

Install the Driver on a

Network

First, Print the Menu Map

Model B411dn

1 Click on Start > All Programs > Okidata >

Configuration Tool and select Configuration

Tool.

2 Click the B411 icon in the left panel.

3 Click the Device Setting tab.

4 Click the Menu Setting button.

5 Click USER MENU.

6 Click INFORMATION MENU.

7 Click the EXECUTE button beside PRINT MENU

MAP.

The Menu Map prints.

Keep these sheets handy: they contain

information you need to set up the printer on

your network.

Model B431dn

1 Press Menu ▲ or ▼ on the control panel to

select the Information Menu.

2 Press OK button.

3 Press the ▲ or ▼ button to select Network.

4 Press OK button to print the Menu Map.

Keep these sheets handy: they contain

information you need to set up the printer on

your network.

Second, Install the Driver

Models B411dn, B431dn

1 Insert the CD in the CD-ROM drive. The CD will

autorun.

2 Select your language. Click Next.

3 If you accept the license agreement, select I

Accept.

4 Select the Driver Setup tab then click Install

Driver.

5 Select nNetwork printer.

6

Select Directly to the network using TCP/IP.

7 Enter the IP address (locate the address on

the Print Menu Map in the Network Menu) or

select Search Address to locate the printer on

the network.

8 Follow the on-screen instructions.

Third, Test the Printer Driver

Installation

Models B411dn, B431dn

To make sure the printer driver is correctly

installed, print a test page:

1 On the Windows taskbar click Start/Settings/

Printers.

2 Right-click the printer model then click

Properties.

3 Click the Print Test Page button. Reinstall the

driver if the installation failed.

Configure Settings Using a Web

Browser (optional)

Models B411dn, B431dn

If you are working in a TCP/IP-enabled

environment, you can use a web browser to

display the printer or job printing status, and to

change settings on an embedded web page.

1 Activate your web browser (Microsoft

Explorer

®/

™, Netscape Navigator™ 4.4 or

higher, Mozilla

®

, Firefox

®

).

2 Enter the IP Address for the printer. (Locate

the address on the Print Menu Map in the

Network Menu.

3 When the web page appears, select from the

categories in the menu list.

Models B411d and B431d:

Install the Driver on a USB or

Parallel Setup

Install the Driver

1 Insert the CD in the CD-ROM drive. The CD will

autorun.

2 Select your language. Click Next.

3 If you accept the license agreement, select I

Agree.

4 Select the Driver Setup tab then click Install

Driver.

5 Select Local Printer. Click Next.

6 Select the Port: USB or LPT1 (Parallel). Click

Next.

English 10

7 Select printer model. Click Next.

8 If your model is a B431, select printer

emulation type (PCL or PS).

9 Follow the on-screen instructions.

10 When done, click Finish.

Test the Printer Driver Installation

To make sure the printer driver is correctly

installed, print a test page:

1 On the Windows taskbar click Start > Settings

> Printers [Printers and faxes].

2 Right-click the printer model then click

Properties.

3 Click the Print Test Page button. Reinstall the

driver if the installation failed.

Model B411 only: Install the

Configuration Tool

1 When the driver has been installed, the

installer will go back to the menu screen.

2 Click Optional Utiities.

3 Click Install Configuration Tool.

4 With Configuration Tool highlighted, click

Install.

5 When the inslattaion is complete, click Close.

All Models: Finish the

Installation

Install Utilities and Downloads

Note: You must be connected to the internet to

install Internet downloads.

1 Select Optional Utilities or Internet Downloads

from the CD installer menu.

2 Click on the utilities and downloads you want

to install and follow the instructions.

Change the Display Language

The default language used by your printer for

display messages is English. To change it:

1 Select Optional Utilities > Change the Printer

Display Language from the CD menu.

2 Follow the on-screen instructions.

Install the User Guide

1 Select the Driver Setup from the CD installer

menu bar.

2 Click Install User’s Guide.

3 Follow the on-screen instructions to install the

manual on your computer.

4 To view the manuals, click Start > Programs >

OkiData B411/B431 User Guide.

Note: To open the on-line user guide, you must

have Adobe

®

Acrobat

®

Reader 5.0 or

higher installed.

Activate Printer Options

If you have an optional paper tray installed, it

must be activated in the printer driver.

1 Click Start > Settings > Printers on the Win-

dows task bar.

2 Right click the printer icon and choose

Properties.

3 Click on the Device Options tab.

4 Select Lower Cassette.

5 Click OK to activate the settings.

Note: If optional memory is installed, follow the

installation instructions provided with the

memory card.

Macintosh

®

Setup

The printer drivers support OS 10.2.8 and above.

Connect the cable

See “Computer Connection” on page 8.

Note: Printer operation is not assured if another

USB compatible device is connected

concurrently with it.

Install the Printer Driver

1 Turn on the printer, then turn on the computer.

2 Place CD in the CD-ROM drive.

3 Double-click the CD icon that appears on the

desktop.

4 Open the MAC folder.

5 Open the OSX folder.

6 Open the Driver Installer folder.

7 Open the Multilingual folder. The installer will

automatically install the language selected in

the OS.

8 Select PCL, or select PS (B431 only).

9 Follow the on-screen instructions.

Add the Printer

1 Run the Print Center or Print Setup Utility or

Print and Fax.

2 Click Add.

3 Click More Printers.

4 For USB, select OKI USB and quit.

5 For network models select OKI TCP/IP or

Bonjour from the drop-down menu.

6 Enter the printer’s IP address (network

models).

7 Quit.

English 11

Install the Utilities

1 Insert the CD in the CD-ROM drive.

2 Double-click the CD icon that appears on the

desktop.

3 open the Mac folder.

4 Double-click the OSX icon.

5 Double-click the Utility Installer.

6 Click Multilingual.

7 Click OSX B400 Series Utilities. Follow the on-

screen instructions.

8 When the utilities list appears, check the

utilities you want to install.

Install the Documentation

Note: Adobe

®

Acrobat

®

Reader 5.0 or higher is

required to view the manuals.

1 Insert the CD into your CD-ROM drive.

2 Double-click the CD icon that appears on the

desktop.

3 Install the manuals from the root directory.

To load: drag the .pdf file to the

desktop

To view: double-click it.

Service and Support

Available 24 hours a day, 7 days a

week.

• Visit our website:

www.okiprintingsolutions.com

• Call 1-800-654-3282 (1-800-OKI-DATA)

Page is loading ...

Trademark Information

OKI, OkiLAN ® Oki Electric Industry Company, Ltd.

Microsoft, Windows, Windows Vista, Internet Explorer ®/™ Microsoft Corporation in the United States and other countries.

Netscape, Netscape Navigator U.S. ™, Netscape Communications Corporation. Adobe, Acrobat, Acrobat Reader, PostScript ™

Adobe Systems, Inc. which may be registered in certain jurisdictions. Ethernet ® Digital Equipment Corporation. EtherTalk,

LaserWriter, Mac, Macintosh ® Apple Computer, Inc., Velcro ® Velcro Industries, Mozilla and Firefox ®/™ Mozilla Foundation.

OKI B411D Owner's manual

OKI B411D Owner's manual

in other languages

Related papers

Other documents