American Standard Lifetime 6060LC User manual

Type
User manual

This manual is also suitable for

American Standard Lifetime 6060LC is a high-gloss acrylic whirlpool tub designed for comfortable two-person bathing. It features dual back support positions, an integral seat, and an installed grab bar for added safety. The tub is powered by a 2.1 HP self-draining pump/motor with a dry run seal, ensuring reliable operation.

The 6060LC model comes equipped with ten adjustable jets, including two Ideal Flow Comfort Jets™ and eight Comfort Jets™, providing a customizable hydro massage experience. It also has three silent air volume controls and a side-mounted On/Off control for convenient operation.

American Standard Lifetime 6060LC is a high-gloss acrylic whirlpool tub designed for comfortable two-person bathing. It features dual back support positions, an integral seat, and an installed grab bar for added safety. The tub is powered by a 2.1 HP self-draining pump/motor with a dry run seal, ensuring reliable operation.

The 6060LC model comes equipped with ten adjustable jets, including two Ideal Flow Comfort Jets™ and eight Comfort Jets™, providing a customizable hydro massage experience. It also has three silent air volume controls and a side-mounted On/Off control for convenient operation.

HD-1
© 2007 American Standard Inc.
LIFETIME™ CORNER
WHIRLPOOLS BY AMERICAN STANDARD
HIGH GLOSS ACRYLIC
LIFETIME™ CORNER
Comfortable two person design with dual back
support positions, integral seat and installed grab bar.
Model# 6060L (specify color)
• Acrylic with berglass reinforcement
• 2.1 HP self-draining pump/motor with dry
run seal
• Ten ow adjustable jets including:
Two adjustable Ideal Flow Comfort Jets
Eight adjustable Comfort Jets
• Three silent air volume controls
• Side-mounted On/Off control
• Complete factory installed and tested
whirlpool system
Includes E-Z-Install™ Whirlpool Heater
Model# 6060LC (specify color)
• Same as above with the EverClean™ whirlpool
system. The EverClean™ antimicrobial system
incorporates AlphaSan®, a patented
antimicrobial agent manufactured right into the
circulation system components, which
suppresses the growth of unsightly algae,
fungus, mold and mildew.
Nominal Dimensions:
54-1/2” x 54-1/2” x 21-1/2
(1384 x 1384 x 546mm)
Installed Size:
76-3/4” x 65-3/8” x 21-1/2”
(1949x 1661 x 546mm)
Compliance Certications -
Meets or Exceeds the Following Specications:
• Underwriters Laboratories - Hydromassage
Bathtubs UL 1795
• ASME A112.19.7M for Whirlpool Appliances
• ANSI Z124.1 for Plastic Bathtubs
• ASTM E162 for Flammability
• NFPA 258 for Smoke Density
SEE REVERSE FOR ROUGHING-IN DIMENSIONS
AND PRODUCT SPECIFICATIONS
Components Needed:
Bath Filler*: (specify nish)
Bath Drain: 1583.470 (specify color)
OR 1599.500.020 (white only)
Custom Accessories Available:
Corner Apron: CORNER-APRON (specify color)
Tile Bead Kit: TILE-BEAD
For color/nish availability and other faucet choices, please
see the Product Selector and Pricing Guide.
NOTE: E-Z-Install™ Whirlpool Heater is designed to
maintain water temperature during operation. It will not heat
cold water to desired bathing temperature.
Revised 7/07
* See American Standard Faucet Selector
AlphaSan® is a registered trademark of Milliken & Co.
HD-2
© 2007 American Standard Inc.
LIFETIME™ CORNER
WHIRLPOOLS BY AMERICAN STANDARD
HIGH GLOSS ACRYLIC
Revised 7/07
7"
(178mm)
76-3/4"
(1949mm)
54-1/2"
(1384mm)
65-3/8"
(1661mm)
3"
(76mm)
7"
(178mm)
15"
(381mm)
8"
(203mm)
17-3/4"
(451mm)
19-1/2"(C)
(495mm)
65-3/8"
(1661mm)
18"(A)
(457mm)
10"
(254mm)
13-3/4"
(349mm)
CUT OUT IN FLOOR
FOR DRAIN
21-1/2"(H)
(546mm)
DIMENSIONS OF FIXTURES ARE NOMINAL AND MAY VARY WITHIN THE RANGE
OF TOLERANCES ESTABLISHED BY ANSI STANDARDS Z124.1 AND A112.19.7.
C/L
OF
OVERFLOW
OUTLINE OF
CUTOUT
INSTALLED SIZE
WEIGHT
WEIGHT w/WATER
GAL. TO OVERFLOW
WHIRLPOOL MIN. OPERATING VOL.
BATHING WELL AT SUMP
BATHING WELL AT RIM
WATER DEPTH TO OVERFLOW
FLOOR LOADING
(PROJECTED AREA)
GENERAL SPECIFICATIONS FOR 6060L WHIRLPOOL
WHIRLPOOL ELECTRICAL SPECIFICATIONS
PUMP
76-3/4 x 65-3/8 x 21-1/2 In. (1949 x 1661 x 546mm)
108 Lbs. (49 Kg.)
824 Lbs. (374 Kg.)
86 Gal. (325 L)
71 Gal. (269 L)
48 x 26-1/2 In. (1219 x 673mm)
63 x 50 In. (1600 x 1270mm)
15 In. (381mm)
24 Lbs./Sq.Ft. (116 Kgs./Sq.m)
2.1 HP, 14.4 AMPS,120V.
E-Z INSTALL WHIRLPOOL HEATER 12.0 AMPS,120V.
NOTES:
BATH CAN BE INSTALLED EITHER ABOVE OR BELOW FLOOR LINE AS PIER, ISLAND OR PENINSULA TYPE INSTALLATION. SUPPORT OF
BATH BY INTEGRAL FEET. NO ADDITIONAL SUPPORT REQUIRED. SUPPORT AND ENCLOSING MATERIAL BY OTHERS.
REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH WHIRLPOOL FOR ADDITIONAL INFORMATION.
OPTIONAL 2-WALL TILING BEAD KIT No.TILE-BEAD MUST BE ORDERED SEPARATELY.
CUTOUT TEMPLATE PROVIDED IN SHIPPING BOX. MAY BE REQUESTED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.
FITTINGS NOT INCLUDED, MUST BE ORDERED SEPARATELY.
IF INSTALLING A DECK-MOUNTED FITTING, BEFORE DRILLING ANY HOLES: CHECK FOR INTERFERENCE WITH CIRCULATING SYSTEM
PIPING, DRAIN OVERFLOW, AND APRON INSTALLATION. MOUNTING HOLES DRILLED BY INSTALLER.
IMPORTANT: Dimensions of xtures are nominal and may vary within the range of tolerances established by ANSI Standard Z124.1
These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided leaet.
  • Page 1 1
  • Page 2 2

American Standard Lifetime 6060LC User manual

Type
User manual
This manual is also suitable for

American Standard Lifetime 6060LC is a high-gloss acrylic whirlpool tub designed for comfortable two-person bathing. It features dual back support positions, an integral seat, and an installed grab bar for added safety. The tub is powered by a 2.1 HP self-draining pump/motor with a dry run seal, ensuring reliable operation.

The 6060LC model comes equipped with ten adjustable jets, including two Ideal Flow Comfort Jets™ and eight Comfort Jets™, providing a customizable hydro massage experience. It also has three silent air volume controls and a side-mounted On/Off control for convenient operation.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI