Groupe Brandt DRH915JE Owner's manual

Category
Freezers
Type
Owner's manual
LES NOUVEAUX OBJETS DE VALEUR
200382791
FR GUIDE D’INSTALLATION & D’UTILISATION
EN INSTRUCTIONS FOR USE
NL GEBRUIKSAANWIJZING
DE BEDIENUNGSANLEITUNG
Réfrigérateur à intégrer
Integrated Refrigerator
Ijkast
Kühlschrank
DRH 914 JE
18
3 Collez les baguettes couvre-joint (E).
4. Mettez en place
5. Vissez l’appareil.
GF1MERA
PL09
FAL3MERA
6. Mettez en place les caches (L) des vis.
7. Montez le kit de décoration.
8. Posez la poignée.
PL13
PL12
SAB1ME
20
Instructions for the use of the instructions booklet
Notes which are important for your safety or for the proper functioning of the
appliance
Supplementary information regarding operation and practical applications of the
appliance.
Tips and notes concerning economical and environmentally sound use of the
appliance
The symbol on the product or on its packaging indicates that this product may not
be treated as household waste. Instead it shall be handed over to the applicable
collection point for the recycling of electrical and electronic equipment. By
ensuring this product is disposed of correctly, you will help prevent potential neg-
ative consequences for the environment and human health, which could other-
wise be caused by inappropriate waste handling of this product. For more
detailed information about recycling of this product, please contact your local
city office, your household waste disposal service or the shop where you pur-
chased the product.
Safety Instructions.............................................................................................21
Disposal ..........................................................................................................22
Use and Control / Before Use.............................................................................23
Starting the appliance .......................................................................................23
Temperature control ..........................................................................................23
Internal parts / Storage shelves / Door shelves .....................................................24
Hints / Saving Energy ........................................................................................24
Hints for refrigeration .........................................................................................25
Hints for freezing...............................................................................................25
Hints for storage of frozen food ...........................................................................26
Explanation of the cold zonesigns........................................................................26
Maintenance / Defrosting ..................................................................................27
How to change the bulb.....................................................................................28
Something not Working......................................................................................29
Customer Service and Spare Parts / Technical Specifications .................................30
Installation / Positioning ...................................................................................30
Electrical connection .........................................................................................31
Change of door opening direction of frozen food compartment ................................31
Door reversal....................................................................................................32
Building-in........................................................................................................33
Contents
21
Domestic Use
Keep these instructions and they should
remain at the appliance when moving
away or changing owner.
This appliance is designed for storing
food, domestic use and being used
according to these instructions only.
Specialised companies that are quali-
fied to do so by the manufacturer must
carry out service and repairs including
repairing and changing the power
cord. Accessory parts supplied by them
should be used only for repairing.
Otherwise the appliance can be damaged
or can cause other damage or injury.
Make sure that the mains plug is accessi-
ble after the installation of the appliance.
Before maintenance, switch off the appli-
ance and disconnect the mains plug from
the mains socket.
Power cord must not be lengthened.
Make sure that the power plug is not
squashed or damaged by the back of
the fridge/freezer.
- A damaged power plug may overheat
and cause a fire.
Do not place heavy articles or the
fridge/freezer itself on the power cord.
- There is a risk of a short circuit and fire.
Do not remove the power cord by
pulling on its lead, particularly when
the fridge/freezer is being pulled out
of its niche.
- Damage to the cord may cause a short-
circuit, fire and/or electric shock.
- If the power cord is damaged, it must be
replaced by a certified service agent or
qualified service personnel.
If the power plug socket is loose, do
not insert the power plug.
- There is a risk of electric shock or fire.
Without the lamp cover of interior lighting
you must not operate the appliance.
When cleaning, defrosting, taking out
frozen food or ice tray do not use sharp,
pointed or hard devices, as they can
cause damage to the appliance.
Be careful not to allow liquids to the tem-
perature control and lighting box.
Ice and ice-cream can cause hurt if they
are eaten immediately after removal from
the frozen food compartment.
After dissolving frozen food must not be
refrozen, it must be used up as soon as
possible.
Store pre-packed frozen food in accor-
dance with the frozen food manufacturer's
instructions.
You must not make defrosting faster with
any electric heating appliance or chemi-
cals.
Do not put hot pot to the plastic parts.
Do not store flammable gas and liquid in
the appliance, because they may explode.
Do not store carbonated drinks, bottled
drinks and bottled fruits in the frozen food
compartment.
Check and clean the outlet of melting
water coming during defrosting regularly -
a label inside the appliance warns you for
this. If it is clogged the melting water gath-
ered can cause earlier failure.
Precautions for child safety
Do not allow children to play with the
packaging of the appliance. Plastic foil
can cause suffocation.
Adults must handle the appliance. Do not
allow children to play with it or its control-
ling parts.
If you are discarding the appliance pull the
plug out of the socket, cut the connection
cable (as close to the appliance as you
can) and remove the door to prevent play-
ing children to suffer electric shock or to
close themselves into it.
This information has been provided in the interests of your safety. Please read it before
installing or using the appliance. Please retain the instruction book for future refer-
ence. If owner ship is transferred, please leave the user manual for the new owner.
Safety Instructions
22
This appliance is not intended for use by
persons (including children) with reduced
physical sensory or mental capabilities, or
lack of experience and knowledge, unless
they have been given supervision or
instruction concerning use of the appli-
ance by a person responsible for their
safety.
Environment Protection
This appliance does not contain gasses
which could damage the ozone layer, in
either its refrigerant circuit or insulation
materials. Theappliance shall not be dis-
carded together with the urban refuse and
rubbish. Avoid damaging the cooling unit.
Information on your local disposal sites
may be obtained from your municipal
authorities.
Remove the plug and ensure that any
locks or catches are removed, to prevent
young children being trapped inside.
Disposal
Appliance Packaging Information
The materials marked with the symbol
are recyclable.
>PE< for polyethylene, e.g. sheet wrapping
material
>PS< for polystyrene, e.g. padding material
(always CFC-free)
>POM< polyoxymethylene, e.g. plastic clips.
All materials are environmentally sound!
Safety precautions for isobutane
Warning
The refrigerant of the appliance is isobu-
tane (R 600a) that is inflammable and
explosive to a greater extent.
Keep ventilation openings, in the appli-
ance enclosure or in the built-in structure,
clear of obstruction.
Do not use mechanical devices or other
means to accelerate the defrosting
process, other than those recommended
by the manufacturer.
Do not damage the refrigerant circuit.
Do not use electrical appliances inside the
food storage compartments of the appli-
ance, unless they are of the type recom-
mended by the manufacturer.
23
Do not use detergents or abrasive
powders, as these will damage the
finish.
Remove safety elements used for trans-
portation.
Before Use
Insert the plug into the wall socket and
turn the thermostat knob clockwise
beyond position «O» (OFF).
The thermostat control situated inside the
fridge compartment regulates the temper-
ature of the appliance.
Turn the thermostat control to the
required setting.
Wait 4 hours before connecting the appli-
ance to allow the oil to flow back in the com-
pressor.
Before using the appliance for the first
time, wash the interior and all internal
accessories with lukewarm water and
some neutral soap so as to remove the
typical smell of a brand-new product, then
dry thoroughly.
Starting the appliance
Temperature Control
The following effects are of significance in
respect of the interior temperature:
Ambient temperature
Quantity and temperature of the food
stored;
Frequency with which the door is opened
and how long it is left open
the location of the appliance.
The temperature inside the appliance is
automatically adjusted.
Setting “1” = hightest temperature,
warmest setting
Setting “6” = lowest temperature, cold-
est setting.
Setting “ ” = Off
A medium setting is generally the most
suitable.
24
Internal Parts
Storage shelves
The shelves can be removed for cleaning.
To permit storage of food packages of
various sizes, the shelves can be placed
at different heights.
To remove the internal shelf pull forward
until it can be tipped up or down and
removed.
Please do the same in reverse to insert
the shelf at a different height.
The glass shelf above the vegetable
drawers and the bottle shelf should
always remain in position, to ensure
correct air circulation.
Door shelves
To permit storage of food packages of
various sizes, the central door shelf can
be adjusted in height.
Gradually pull the shelf in the direction of
the arrows until it comes free, then repo-
sition as required.
For more thorough cleaning, the top and
bottom door sheves can be easily
removed and refitted in position.
Saving Energy
Pay careful attention to where the cabinet
is placed. See the section Installation.
When installed correctly the cabinet will
consume less energy.
Try to avoid keeping the doors open for
long periods or opening the doors too fre-
quently as warm air will enter the cabinet
and cause the compressor to switch on
unnecessarily often.
Hints
If the ambient temperature is high, the ther-
mostat knob is on the coldest setting (high-
er numbers) and the appliance is fully
loaded, the compressor may run continu-
ously, causing frost or ice to form on the
evaporator. If this happens, turn the knob
to a warmer setting (lower numbers) to
allow automatic defrosting and so a saving
in electricity consumption.
Do not place warm foods inside the appli-
ance. Allow warm foods to cool first.
Keep the heat emitting condenser, the met-
all grille on the rear wall of your appliance,
always clean.
25
Do not store warm food or evaporating liq-
uids in the refrigerator and do cover or
wrap up the food, particularly if it has a
strong smell.
To help you use your refrigerator correctly,
here are some useful hints:
Raw meat (beef, pork, lamb & poultry):
wrap in polythene bags and place on top
of the salad compartment, this being the
coldest spot in the refrigerator.
Meat can only be stored safely in this way
for one or two days at the most.
Cooked food, cold cuts, jelly, etc.:
these should be well covered and can be
stored on any of the glass shelves.
Fruit & vegetables: these should be thor-
oughly cleaned and placed in the bottom
drawer/s.
Butter & cheese: these should be placed
in special airtight containers or wrapped in
aluminium foil or polythene bags to keep
out as much air as possible.
Milk bottles: these should have a top and
should be stored in the bottle rack on the
door.
Bananas, potatoes, onions and garlic, if
not packed, must not be kept in the refrig-
erator
Hints for refrigeration
Hints for freezing
To help you make the most of the freezing
process, here are some important hints:
the maximum quantity of food which can
be frozen in 24 hrs. is shown on the rating
plate;
the freezing process takes 24 hours. No
further food to be frozen should be added
during this period;
only freeze top quality, fresh and thor-
oughly cleaned, foodstuffs;
prepare food in small portions to enable it
to be rapidly and completely frozen and to
make it possible subsequently to thaw
only the quantity required;
wrap up the food in aluminium foil or poly-
thene and make sure that the packages
are airtight;
do not allow fresh, unfrozen food to touch
food which is already frozen, thus avoiding
a rise in temperature of the latter;
lean foods store better and longer than
fatty ones; salt reduces the storage life of
food;
water ices, if consumed immediately after
removal from the freezer compartment,
can possibly cause the skin to be freeze
burnt;
it is advisable to show the freezing in date
on each individual pack to enable you to
keep tab of the storage time.
26
Hints for storage of frozen food
To obtain the best performance from this
appliance, you should:
make sure that the commercially frozen
foodstuffs were adequately stored by the
retailer;
be sure that frozen foodstuffs are trans-
ferred from the foodstore to the freezer in
the shortest possible time;
not open the door frequently or leave it
open longer than absolutely necessary.
Once defrosted, food deteriorates rapidly
and cannot be refrozen.
Do not exceed the storage period indicat-
ed by the food manufacturer.
Explanation of the cold zonesigns
The symbol shown here on the left
indicates the coldest point inside your
refrigerator.
Coldest area: below or equal to +4°C
Meat, poultry, fish, cold cuts, ready-to-eat
meals, mixed salads, egg or cream based
mixes and cakes, fresh pasta, cake mixes,
pizzas/quiches, fresh foods and fresh-milk
cheeses, vegetables ready to be used and
packed in plastic bags and all other fresh
foods whose expiry date is associated with a
preservation temperature below or equal to
+4°C.
T
emperatur indicator
Thermostat must be Right Temperature
adjusted
With the temperature indicator you can keep
a check that your refrigerator is working prop-
erly.
The indicator shows the "OK" symbol when
the coldest area reaches a temperature that
is below or equal to 4ˇC.
If the temperature is higher than 4ˇC the indi-
cator is black so you must adjust the thermo-
stat to make the temperature drop.
ATTENTION: Keeping the refrigerator door
open for a long time will cause the internal
temperature to rise. To measure the tempera-
ture correctly, it should be read on the indica-
tor within 30 seconds.
27
Unplug the appliance before carry-
ing out any maintenance opera-
tion.
Warning
This appliance contains hydrocarbons in its
cooling unit maintenance and recharging
must therefore only be carried out by autho-
rised technicians.
Defrosting
Bleeding part of the moisture of cooling
chamber in form of frost and ice goes with
the operation of the refrigerator.
Thick frost and ice has an insulating effect,
so it reduces cooling efficiency as the tem-
perature increases, it needs more energy, at
a certain thickness it does not allow the door
of the frozen food compartment to open,
possibly the door can be broken.
At this type of appliance defrosting fresh
food compartment is automatic without any
external intervention.
The thermostatic control interrupts the opera-
tion of compressor at regular intervals for
more or less time - during this cooling is
interrupted - temperature of the fresh food
compartment increases and defrosting
occurs. After defrosting the thermostatic
control restarts operation of the system.
Melting water flows through defrost water
outlet into the evaporative tray maintained on
the top of compressor and evaporates due to
warmth of it.
Check and clean the outlet of
melting water coming during
defrosting regularly. If it is
clogged the melting water gath-
ered can cause earlier failure as it
can go to the insulating of the
appliance.
Maintenance
Clean the melting water outlet with the sup-
plied pipe scraper that can be seen in the fig-
ure. The pipe scraper has to be stored in the
outlet.
Occasionally check defrost water outlet not to
be clogged up.
The most typical case of clogging up in the
defrost water outlet when you put food
wrapped in some paper into the appliance
and this paper contacts back plate of fresh
food compartment and freezes to it. If you
remove the food right at this moment the
paper will tear and it can cause clogging up
in the outlet by getting into it. So you are
asked to be careful - because of the above -
when placing foods wrapped in paper into the
appliance.
In case of increased demand e.g. dur-
ing heatwaves, the refrigerator tem-
porarily happens to operate constant-
ly. During this the automatic defrosting
is ineffective.
Remaining small ice and frost stains on back
plate of the fresh food compartment after
defrosting period is not abnormal.
The frozen food compartment can not be
equipped with automatic defrosting set since
the deep-frozen and frozen foods do not
endure melting temperature.
Provided it is not too thick, the layer of frost
or ice can be scraped off and removed using
a plastic scraper.
When ice coating is so thick that it can not be
removed with the plastic scraper, the frozen
food compartment has to be defrosted (gen-
erally 2-3 times a year).
28
Disconnect the appliance from the electricity
supply.
Empty all foods and clean the appliance,
leaving the doors ajar to prevent unpleasant
smells.
Should the light fail to work you can change it
as below:
Break the circuit of the appliance.
Unscrew the plate screw fixing the lamp
cover, then take the lamp cover off in the
direction of arrow and the bulb can be
changed. (Type of the bulb: Mignon 322,
230 V, 15 W, E 14 thread)
How to change the bulb
After changing bulb replace the lamp cover,
screw the plate screw and apply voltage to
the appliance.
The lack of light does not influence operation
of the refrigerator.
Take the foods out of the frozen and fresh
food compartment, wrap them into some lay-
ers of paper or cloth. Put them to a possible
cool place while defrosting.
Break the circuit of the appliance and leave
the doors of frozen and fresh food compart-
ment open.
Continuously blot off the defrosting water by a
soft cloth or sponge.
After defrosting wipe the surfaces, apply volt-
age to the appliance and put the foods back
to their places.
It is recommended to operate the appliance
at the highest position of the thermostatic
control so that it can reach the proper storing
temperature as soon as possible.
Cleaning
Never use metal objects for clean-
ing your appliance as it may get
damaged.
NEVER use detergents, abrasive powders,
highly perfumed cleaning products or wax
polishes to clean the interior as these will
damage the surface and leave a strong
odour.
Clean the inside with warm water and bicar-
bonate of soda. Rinse and dry thoroughly.
To guarantee a safe operation of the fridge,
once a year remove the ventilation grill at the
base and clean the air channels with a vacu-
um cleaner.
29
Something not Working
Problems may be due to causes which
can easily be solved before calling the
Technical Service. Please follow these
instructions:
SYMPTOM
Door does not close
It is too warm inside the refrig-
erator
It is too cold inside the refriger-
ator.
The compressor works contin-
uously.
There is water inside/outside
the refrigerator.
Water comes out on the floor.
Noises
SOLUTION
Level properly the appliances if it is not well levelled.
Weight surpasses the storage limit of the door shelf so spread weight
more evenly or take some products out.
The appliance is not properly installed. Please look in the “Building-in”
section.
Set a lower temperature.
Distribute the food products to allow cold air to circulate around them.
Make sure that the door is completely closed and that the insulating strip
is complete and clean.
The temperature where the cabinet is placed is above normal room tem-
perature.
Turn the temperature regulator to a warmer setting temporarily.
Turn the thermostat knob to a lower number.
The temperature where the cabinet is placed is above normal room tem-
perature.
Check that the ventilation is sufficient and that the ventilation openings
are unobstructed.
The cause could be the introduction of large quantities of food and/or
frequent opening/closing of the door.
Sometimes is normal. During automatic defrosting frost thaws on the
cooling plate.
Place the drain hose at the back of the cabinet above the drain bowl.
Sometimes this is normal. Temperature control may cause clicking
sounds when the system is connected or disconnected.
The injected cooling gas may produce a gurgling sound while passing
through the tubes.
The motor may cause a humming noise and/or slight bumping.
The insulation material used has a tendency to slighly increase noise lev-
els, how ever it allows for much better insulation and a lower energy con-
sumption.
30
If you cannot find the remedy for a malfunc-
tion in these operating instructions, please
contact your dealer or our customer service
department and consult the Guarantee card.
Selective ordering of replacement parts can
save unnecessary travel and costs.
For this reason always provide the following
appliance information:
Model Name
Model Number (PNC)
Serial Number (S-No.)
This information can be found on the rating
plate inside the cabenit on the left hand wall.
We recommend that you enter this informa-
tion here, so that it is handy if needed.
Technical specifications
The technical data is indicated in the rating
plate on the left side inside the appliance.
Customer service and spare parts
Take utmost care when handling
your appliance so as not to cause
any damages to the cooling unit
with consequent possible fluid
leakages.
During normal operation, the condenser
and compressor at the back of the appli-
ance heat up considerably. Always ensure
that there is adequate ventilation as a fail-
ure to do this will result in component fail-
ure and possible food loss. See installa-
tion instructions.
Important: if the supply cord is damaged,
it must be replaced by a special cord or
assembly available from the manufacturer
or its service agent.
Positioning
Unpack the cabinet and check that it is in
good condition and free of any transport
damage.
The appliance must not be located close
to radiators or gas cookers.
Avoid prolonged exposure of the appli-
ance to direct sunlight.
For safety reasons, minimum ventilation
must be as shown in Fig.
Attention: keep ventilation openings clear
of obstruction.
It is necessary that the niche is provided
with a conduct of venti-lation having the
following dimensions:
Depth: 50 mm
Width: 540 mm
The climate classification can be found on the
rating plate, which is located inside the cabi-
net on the left hand wall.
The following table shows which ambient tem-
perature is correct for each climate classifica-
tion:
Climate for an ambient
classification temperature of
SN +10 to +32 °C
N +16 to +32 °C
ST +16 to +38 °C
T +16 to +43 °C
Installation
31
Before plugging in, ensure that the voltage
and frequency shown on the rating plate cor-
respond to your domestic power supply.
The appliance must be earthed. The power
supply cable plug is provided with a contact
for this purpose. If the domestic power sup-
ply socket is not earthed, connect the appli-
ance to a separate earth in compliance with
Electrical connection
current regulations, consulting a qualified
electrician.
The manufacturer declines all responsibility if
the above safety precautions are not
observed.
This appliance complies with the E.E.C.
Directives.
After changing the outer door opening direc-
tion at this type it is necessary to remount the
door of the frozen food compartment as well.
Operations and their order can be seen in fig-
ure.
Press the retaining lever inside the lower
doorhinge.
Tilt the lower doorhinge out together with
the freezer compartment door then
remove it from the pin of the freezer com-
partment door.
Remove the rectangular plug and put it
into the opening got free on the other
side.
Having the freezer compartment door
turned by 180° put the lower hinge onto
the lower pin of the freezer compartment
door.
Put the upper hinge pin of the freezer
compartment door into the free opening,
then push the lower hinge into its place
together with the freezer compartment
door.
In case you do not want to perform the pro-
cedures above, call the nearest brand-mark
service. Technicians will accomplish the refit-
ting expertly for charge.
Change of door opening direction of frozen food compartment
32
Door reversal
After reversing the door, make sure the
magnetic seal adheres to the cabinet.
If the room temperature is cold (e.g. in
winter ), the seal may not adhere per-
fectly to the cabinet. In this case, wait
until the seal has softened on its own
or speed up the process by warming
the relevant part with a normal hair-
dryer.
T
AW2MERA
T
AW2MERA
T
T
AW1MERA
T
AW1MERA
T
T
AW3MERA
T
AW3MERA
T
33
Building-in
Dimensions of the recess
It is necessary that the niche is provided with a
conduct of ventilation having the following
dimensions:
Depth 50 mm
Width 540 mm
Compartment levelling
Door removal
The following assembly steps only apply for
doors with rabbet on the right side (supply sta-
100
90
90
MAU2ME
tus). If the door rabbet is provided for on the
left side, please carry out the relevant assem-
bly steps on the opposite side.
1. Make the adjustments.
2. Cut the side trim (E).
F
F
AL1MERA
1BL80R
34
3. Apply the side trim (E).
4. Insert the appliance.
5. Fix the appliance.
GF1MERA
PL09
FAL3MERA
6. Apply the hole covers.
7. Fit the decorative panel.
8. Fitting the handle.
PL13
PL12
SAB1ME
35
9. Refit the door.
10. Door alignment (if necessary).
TE1MERA
52
8. Bevestiging van de handgreep.
9. Bevestiging van de deur .
10. Uitlijnen van de deur (indien nodig).
TE1MERA
PL13
69
8. Montage Türgriff
9. Gerätetür einsetzen.
10. Gerätetür ausrichten (falls erforderlich).
TE1MERA
PL13
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72

Groupe Brandt DRH915JE Owner's manual

Category
Freezers
Type
Owner's manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI