DESCRIPTION
InnoGreen LED flood light is ideal for commercial and industrial lighting with more than 50% energy
savings compared to traditional lighting. Modular design for better power, appearance, and
maintenance flexibility. Advance air flow thermal management for better heat dissipation.
DESCRIPTION
PARAMETERS
1.2A (100W)
Current (Max)
- 20 to 40 deg C
Application Environment
COB
LED Type:
IP65
IP Rating:
Beam Angle:
INSTALLATION AND MAINTENANCE
1. Be sure to disconnect any power before installation.
2. Ensure that the mounting surface of the product can endure the weight; drill holes according to
the installation diagram; x the product on the mounting surface with 3 sets of M10 installation bolts
(bolt to be provided by customer).
3. Connect the product wire with matching power wire; seal the joint of installation.
SAFETY PRECAUTIONS
● Refer to product specications to ensure usage environment, proper input voltage and frequency.
● This product must only be installed by professionals.
● If there is any damage on the power line or the shell of the product, it should be taken as defective
and must not be used.
● High voltage product. Non-professinals are not allowed to maintain or install the product.
● Damaged external cables should be replaced by manufacturer, service agent or by trained professionals.
> 0.9
Power Factor
120 O
Gross Weight:
1.8A (150W) 2.3A (200W)
3.4A (300W) 4.5A (400W) Other __________
5.0kg (100W) 9.5kg (150W) 9.5kg (200W)
18.5kg (300W) 18.5kg (400W) Other __________
DESCRIPTIONDIMENSIONS Units: (mm)
0 -265 Rotatable
o0 -265 Rotatable
o
0 -355 Rotatable
o
Aurora 100W Aurora 150W & 200W
Aurora 300W & 400W
COB