Dahua IVS-TB8000-xE-GU2 User manual

Brand: Dahua

Model: IVS-TB8000-xE-GU2

Category: Networking

Type: User manual

This manual is also suitable for

IVS-TB8000-E-GU1

Intelligent Video Analysis Server for Traffic

Event Detection

Deployment Manual

ZHEJIANG DAHUA VISION TECHNOLOGY CO., LTD. V2.0.0

Deployment Manual

Foreword

This manual introduces the deployment of the server (hereinafter referred to as "the Device"). Read

carefully before using the device, and keep the manual safe for future reference.

Safety Instructions

The following signal words might appear in the manual.

Signal Words Meaning

Indicates a high potential hazard which, if not avoided, will result in

death or serious injury.

Indicates a medium or low potential hazard which, if not avoided,

could result in slight or moderate injury.

Indicates a potential risk which, if not avoided, could result in

property damage, data loss, reductions in performance, or

unpredictable results.

Provides methods to help you solve a problem or save time.

Provides additional information as a supplement to the text.

Revision History

Version Revision Content Release Time

V2.0.0 Updated deployment

procedures. June 2022

V1.0.0 First release. August 2021

Privacy Protection Notice

As the device user or data controller, you might collect the personal data of others such as their face,

fingerprints, and car plate number. You need to be in compliance with your local privacy protection

laws and regulations to protect the legitimate rights and interests of other people by implementing

measures which include but are not limited: Providing clear and visible identification to inform

people of the existence of the surveillance area and provide required contact information.

About the Manual

● The manual is for reference only. Slight differences might be found between the manual and the

product.

● We are not liable for losses incurred due to operating the product in ways that are not in

compliance with the manual.

● The manual will be updated according to the latest laws and regulations of related jurisdictions.

For detailed information, see the paper user’s manual, use our CD-ROM, scan the QR code or visit

our official website. The manual is for reference only. Slight differences might be found between

the electronic version and the paper version.

● All designs and software are subject to change without prior written notice. Product updates

Deployment Manual

might result in some differences appearing between the actual product and the manual. Please

contact customer service for the latest program and supplementary documentation.

● There might be errors in the print or deviations in the description of the functions, operations

and technical data. If there is any doubt or dispute, we reserve the right of final explanation.

● Upgrade the reader software or try other mainstream reader software if the manual (in PDF

format) cannot be opened.

● All trademarks, registered trademarks and company names in the manual are properties of their

respective owners.

● Please visit our website, contact the supplier or customer service if any problems occur while

using the device.

● If there is any uncertainty or controversy, we reserve the right of final explanation.

Deployment Manual

III

Important Safeguards and Warnings

This section introduces content covering the proper handling of the device, hazard prevention, and

prevention of property damage. Read carefully before using the device, and comply with the

guidelines when using it.

Transportation Requirements

Transport the server under allowed humidity and temperature conditions.

Storage Requirements

Store the server under allowed humidity and temperature conditions.

Installation Requirements

● Strictly comply with the local electrical safety code and standards. Make sure the ambient voltage

is stable and meets the power supply requirements of the server.

● Do not expose the battery to environments with extremely low air pressure, or extremely high or

low temperatures. Also, it is strictly prohibited for the battery to be exposed to extremely hot

environments (such as direct sunlight or fire), and to cut or put mechanical pressure on the

battery. This is to avoid the risk of fire and explosion.

● Use the standard power adapter. We will assume no responsibility for any problems caused by

the use of a nonstandard power adapter.

● Do not place the device in a place exposed to sunlight or near heat sources.

● Keep the device away from dampness, dust, and soot.

● Put the device in a well-ventilated place, and do not block its ventilation.

● Install the switch horizontally on a stable surface to prevent it from falling.

● The device is a class I electrical appliance. Make sure that the power supply of the device is

connected to a power socket with protective earthing.

● Use power cords that conform to your local requirements, and are rated specifications.

● Before connecting the power supply, make sure the input voltage matches the server power

requirement.

● When installing the device, make sure that the power plug and appliance coupler can be easily

reached to cut off power.

● Install the server in an area that only professionals can access.

● Extra protection is necessary for the device casing to reduce the transient voltage to the defined

range.

● Install the device near a power socket for emergency disconnect.

● It is prohibited for non-professionals and unauthorized personnel to open the device casing.

Deployment Manual

Operation Requirements

● This is a class A product. In a domestic environment this may cause radio interference in which

case you may be required to take adequate measures.

● The device is heavy and needs to be carried by several persons together to avoid personal

injuries.

● Make sure that the power supply is correct before use.

● Operate the device within the rated range of power input and output.

● Use the device under allowed humidity and temperature conditions.

● Do not drip or splash liquid onto the device, make sure that there is no object filled with liquid on

the device to prevent liquid from flowing into it.

● Do not disassemble the device without professional instruction.

● Your configurations will be lost after performing a factory reset. Please be advised.

● Do not restart, shut down or disconnect the power to the device during an update.

● Make sure the update file is correct because an incorrect file can result in a device error occurring.

● The system cannot upgrade different types of AI modules at the same time.

● Do not frequently turn on/off the device. Otherwise, the product life might be shortened.

● Back up important data on a regular basis when using the device.

● Operating temperature: 10 °C to 35 °C (50 °F to 95 °F).

Maintenance Requirements

● Make sure you use the same model when replacing the battery to avoid fire or explosion. Dispose

the battery strictly following the instructions.

● Power off the device before maintenance.

● AI module does not support hot plug. If you need to install or replace the AI module, unplug the

device power cord first. Otherwise, it will lead to file damage on the AI module.

● The device casing provides protection for internal components. Use a screwdriver to loosen the

screws before detaching the casing. Make sure to put the casing back on and secure it in its

original place before powering on and using the device.

● Clean the ventilation pipe regularly to avoid obstructions.

● It is prohibited for non-professionals and unauthorized personnel to open the device casing.

● The appliance coupler is a disconnection device. Keep it at a convenient angle when using it.

Before repairing or performing maintenance on the device, first disconnect the appliance

coupler.

Deployment Manual

Table of Contents

Foreword ........................................................................................................................................................................................................I

Important Safeguards and Warnings ............................................................................................................................................ III

1 Web Operation ....................................................................................................................................................................................... 1

1.1 Initialization ................................................................................................................................................................................. 1

1.2 Setting Time ................................................................................................................................................................................. 2

1.3 Configuring Server IP .............................................................................................................................................................. 2

2 (Optional) Configuring Server ....................................................................................................................................................... 4

3 Applying for Encryption .................................................................................................................................................................... 6

3.1 Checking Dongle ........................................................................................................................................................................ 6

3.2 Software-based Encryption .................................................................................................................................................. 6

3.3 Hardware-based Encryption .............................................................................................................................................. 11

4 (Optional) Deploying Server ......................................................................................................................................................... 13

4.1 Before Deployment ................................................................................................................................................................ 13

4.2 Installing CentOS System and Program ....................................................................................................................... 14

4.2.1 Preparing USB Flash Drive ....................................................................................................................................... 14

4.2.2 Selecting Bootup Menu ............................................................................................................................................. 17

4.2.2.1 TB8000-E-GU1 ..................................................................................................................................................... 17

4.2.2.2 TB8000-xE-GU2 (x=2–6) .................................................................................................................................. 19

4.2.2.3 TB8000-MIE ........................................................................................................................................................... 24

4.2.3 Selecting USB Flash Drive ......................................................................................................................................... 24

4.2.4 Selecting Operating System .................................................................................................................................... 26

5 (Optional) Reinstalling Program ................................................................................................................................................. 27

Appendix 1 Cybersecurity Recommendations ........................................................................................................................ 30

Deployment Manual

1 Web Operation

● For baseline server, you need to connect your computer or laptop to the same network segment

as the server before logging in to the web client.

◇ IP address: 192.168.1.107

◇ Subnet mask: 255.255.0.0

◇ Default gateway: 192.168.0.1

● If you do not have a laptop, log in to the server background to configure its settings. For details,

see "2 (Optional) Configuring Server".

1.1 Initialization

For first-time login, you need to initialize the password to log in to the admin account.

Step 1 Open the Chrome browser, enter the default IP address of the web client

(http://192.168.1.108) in the address bar, and then press the Enter key.

Step 2 Enter a new password and confirm the password. Enter your phone number to reset the

password if you forget it.

Step 3 Click Save.

Figure 1-1 Initialize admin password

Deployment Manual

1.2 Setting Time

Set the time of the server.

Click Sync PC to synchronize the time of the server with your computer. You can also set the time

format and time zone.

Figure 1-2 Set time

1.3 Configuring Server IP

Step 1 Open the Chrome browser, enter the default IP address of the server (http://192.168.1.108),

and then press the Enter key.

Step 2 Enter the username and password, and then click Login.

Step 3 Select System Settings > Network Config > TCP/IP > .

Step 4 Change the IP address, subnet mask, and default gateway, and then click OK.

Deployment Manual

Figure 1-3 Change IP

Step 5 On the lower-right corner of the TCP/IP page, click OK. Enter the password, and then click

OK.

Figure 1-4 Confirm

Deployment Manual

2 (Optional) Configuring Server

If you do not have a laptop, log in to the server through Xshell for configuration.

Step 1 Log in to the admin or root account.

● The password for admin is dh-qQ3j!soft.

● The password for root is dahuacloud.

Step 2 Check whether the driver has been successfully installed.

[root@rabbitmq1 ~]# npu-smi info

+------------------------------------------------------------------------------+

| npu-smi 21.0.3.2 Version: 21.0.3.2 |

+-------------------+-----------------+----------------------------------------+

| NPU Name | Health | Power(W) Temp(C) |

| Chip Device | Bus-Id | AICore(%) Memory-Usage(MB) |

+===================+=================+========================

================+

| 2880 310 | OK | 12.8 50 |

| 0 0 | 0000:B6:00.0 | 0 3440 / 8192 |

+-------------------+-----------------+----------------------------------------+

| 2880 310 | OK | 12.8 53 |

| 1 1 | 0000:B7:00.0 | 0 3440 / 8192 |

+-------------------+-----------------+----------------------------------------+

| 2880 310 | OK | 12.8 54 |

| 2 2 | 0000:B8:00.0 | 0 3440 / 8192 |

+-------------------+-----------------+----------------------------------------+

| 2880 310 | OK | 12.8 52 |

| 3 3 | 0000:B9:00.0 | 0 3440 / 8192 |

+===================+=================+========================

================+

Step 3 Check whether the patch has been successfully installed.

[root@rabbitmq1 ~]# cat /patch.txt

2022040117 patch install successful

Step 4 Check the date and time. Run the date command to edit the date.

[root@rabbitmq1 ~]# date

Fri Apr 1 20:38:58 CST 2022

(Optional) [root@rabbitmq1 ~]# date -s "20:39:00"

Fri Apr 1 20:39:00 CST 2022

(Optional) [root@rabbitmq1 ~]# hwclock -w

Step 5 Edit the network configuration in the server SaaS configuration file, and then restart the

service.

[root@rabbitmq1 ~]# cd /cloud/dahua/BehaviorSaaS/Service/Conf/

[root@rabbitmq1 Conf]# vi Config.ini

DefaultMask=xxx.xxx.x.x

DefaultGateWay=xxx.xx.x.x

Deployment Manual

ListenIP=xxx.xx.xxx.xxx

[root@rabbitmq1 Conf]# /cloud/service/services/BehaviorSaaS-Manager restart

Deployment Manual

3 Applying for Encryption

TB8000 supports two encryption methods: hardware-based encryption and software-based

encryption.

3.1 Checking Dongle

Use Xshell to remotely log in to the server, and then you can check whether a dongle is installed. The

tool first recognizes the dongle information by default. If no dongle is recognized, then it tries to

recognize software-based encryption.

Step 1 Log in to the server remotely through Xshell.

Step 2 Run the lsusb command to check whether a dongle is installed on the server.

[root@rabbitmq1 ~]# lsusb

Bus 002 Device 002: ID 8087:8000 Intel Corp.

Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub

Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Bus 001 Device 002: ID 8087:8008 Intel Corp.

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub

Bus 003 Device 002: ID 096e:0202 Feitian Technologies, Inc.

Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

If Feitian Technologies, Inc. appears, it means that the dongle was inserted into the

server; otherwise, there is no dongle, and you need to apply for the software-based

encryption.

Step 3 Check encryption information.

Run the ./LicenseUpdateTool.exe -dog display command to check encryption

information. If it is correct, there is no need to apply for software-based encryption again.

3.2 Software-based Encryption

Step 1 Log in to the server remotely through Xshell.

Step 2 Run the cd /Tools command to go to the Tools directory.

Step 3 Run the ./LicenseUpdateTool.exe -server export command to get the

connection_server.dat file.

[root@rabbitmq1 Tools]# ./LicenseUpdateTool.exe -server export

===========================

SUCCESS:

Export base information successfully.

Path(µ¼³¶): /connection_server.dat

Deployment Manual

File name varies with version and release date.

Step 4 In the Tools directory, run the sz connection_server.dat command to save the file to the

local computer.

Step 5 Apply for software-based encryption on Dahua portal. The portal only supports the

Chinese version. Contact our technical support to help you with the application process.

1. In the portal menu navigation bar, enter 加密 (encryption), select 根据导出设备信息

包申请软License或加密狗License（中心智能设备）(apply for a software license or

dongle license (central intelligence device) based on the exported device information

package).

Figure 3-1 Search for encryption

2. Click新增 (add) to add a software-based encryption application.

Figure 3-2 Add application

3. Enter the application information.

If you apply for permanent encryption, enter the project name, business opportunity

No., and corresponding technical support in the reason field, and then attach the

Deployment Manual

contract.

Figure 3-3 Enter application information

Table 3-1 Parameter description

Parameter Description

Type

Select the application type.

● For hardware-based encryption, select

加密狗

(dongle).

● For software-based encryption, select

软

License (software License).

Deployment Manual

Parameter Description

Dongle

Information

Package

Click

加密狗信息包

(dongle information package), and then select the

exported connection_server.dat file.

● The file name varies according to the version and release date.

● If you select

软加密

(software-based encryption), you do not need to

upload files.

Server Information

Package

Click

服务器信息包

(server information package), and then select the

exported connection_server.dat file.

The file name varies according to the version and release date.

Material No.

Click the text box, and then enter the material No. of the server.

For server material No., see Table 3-2.

Algorithm

Database Usage

Days

Set the usage days.

● Clear the

永久有效

(permanently effective) checkbox, and then

select

算法库使用天数

(algorithm database usage days). means

selected, and means not selected.

● No approval is needed if usage days are under 30 days.

Algorithm

Database Config

Select

算法库配置选择

(Algorithm Database Config), and then select

周

界防范

(2077) (perimeter protection (2077)),

智慧消防（

3114

）

(intelligent firefighting (3114)), and

交通全智能

(3106) (intelligent traffic

(3106)).

Reason Enter the reason for your application.

Table 3-2 Server material No.

Server Name and Model Part No.

Domestic Dahua 1U Traffic Event Detection Intelligent Server (E3

1275V5-8G*2-4T*1-E-dongle included) DH-IVS-TB8000 - E-A 1.0.01.18.10612

Domestic Dahua 2U Traffic Event Detection Intelligent Server

(Silver4114T*2-16G*4-4T*4-E Card*2-dongle included) DH-IVS-

TB8000-2A-GU2

1.0.01.18.10613

Domestic Dahua 2U Traffic Event Detection Intelligent Server

(Silver4114T*2-16G*4-4T*4-E Card*6-dongle included) DH-IVS-

TB8000-6A-GU2

1.0.01.18.10614

Domestic Dahua 2U Traffic Event Detection Intelligent Server

(Silver4114T*2-16G*4-4T*4-E Card*4-dongle included) DH-IVS-

TB8000-4A-GU2

1.0.01.18.10615

Domestic Dahua 2U Traffic Event Detection Intelligent Server

(Silver4114T*2-16G*4-4T*4-E Card*6-dongle included) DH-IVS-

TB8000-6A-GU2

1.0.01.18.10616

Deployment Manual

Server Name and Model Part No.

Domestic Dahua 2U Traffic Event Detection Intelligent Server

(Silver4114T*2-16G*4-4T*4-E Card*6-dongle included) DH-IVS-

TB8000-6A-GU2

1.0.01.18.10617

Overseas Dahua 1U Traffic Event Detection Intelligent Server (E3

1275V5-8G*2-4T*1-E-dongle included) DHI-IVS-TB8000 - E-A 1.0.01.18.10618