Axis 295 Installation guide

Type
Installation guide
AXIS 295 Video Surveillance Joystick
AXIS 295
Video Surveillance Joystick
Installation Guide
AXIS 295 Video Surveillance Joystick
Safety Instructions
This equipment must be installed in strict accordance with the instructions
given in the user documentation. This equipment contains no user-
serviceable components. Unauthorized equipment changes or modifications
will invalidate all applicable regulatory certifications and approvals.
This product is for indoor use only. Be sure to install the product where it
will not be exposed to water or other liquids. For cleaning purposes use damp
tissues with a soft cleaner, do not use aggressive chemicals or abrasives.
Liability - Every care has been taken in the preparation of this manual.
Please inform your local Axis office of any inaccuracies or omissions. Axis
Communications AB cannot be held responsible for any technical or
typographical errors and reserves the right to make changes to the product
and manuals without prior notice. Axis Communications AB makes no
warranty of any kind with regard to the material contained within this
document, including, but not limited to, the implied warranties of
merchantability and fitness for a particular purpose. Axis Communications
AB shall not be liable nor responsible for incidental or consequential
damages in connection with the furnishing, performance or use of this
material.
AXIS 295 Video Surveillance Joystick
Description
AXIS 295 is designed for applications developed for video surveillance
systems. The sensitivity allows for fast, flexible and secure operation with
Axis network cameras with pan, tilt and zoom functionality.
The function buttons - 10 on the panel, 2 on the handle - provide flexible
functionality for e.g. selecting surveillance cameras and taking snapshots.
Rotating handle
2 function buttons on top of handle
10 function buttons
USB cable
2m (3.3ft)
AXIS 295 Video Surveillance Joystick
System Requirements
Windows 2000, Windows XP
USB Port (USB 2.0 Standard)
Installation
1. Connect the USB plug to a USB port on your computer.
2. Follow the on-screen instructions (if applicable) to install the necessary
drivers.
3. The joystick will appear in the Game Controllers list in the Windows
Control Panel on your computer. Open Start > Control Panel > Game
Controllers.
AXIS 295 Video Surveillance Joystick
Troubleshooting
If you experience problems during the installation, please check the
following:
Disconnect the USB plug from the computer, wait 10 seconds and
then reconnect.
Move the USB plug to another available USB port on your
computer.
Windows - verify that the operating system (Windows 2000/XP)
has identified the joystick under Control Panel > Game Controllers
and follow the troubleshooting steps provided.
Support
Should you require any technical assistance, please contact your Axis
reseller. If your questions cannot be answered immediately, your reseller will
forward your queries through the appropriate channels to ensure a rapid
response.
If you are connected to the Internet, visit the Axis Support at www.axis.com/
techsup where you can:
download user documentation
find answers to resolved problems in the FAQ database.
Search by product, category, or phrases
report problems to Axis support by logging in to your private
support area
AXIS 295 Video Surveillance Joystick
Technical Specifications
Item Specification
Model AXIS 295 Video Surveillance Joystick
Material
Deflection X/Y-Axes: ±18°
Z-Axis: ±40°
Centering X/Y - Axes with central return spring
Z- Axis with spring
Protection degree IP50 / IEC60529
Storage temperature -55°C to +165°C
Operational temperature -25°C to +85°C
Interface USB 2.0 Standard
Power supply via USB interface (5V DC)
Weight 440g
Approvals EN55024:1998
EN55022
FCC Part 15 Subpart B, Class B
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following conditions: (1)
This device may not cause harmful interference, and
(2) this device must accept any interference
received, including interference that may cause
undesired operation. This Class B digital apparatus
complies with Canadian ICES-003.
Housing: high impact ABS
Handle: high impact glass reinforced nylon
Boot: thermoplastic rubber
Shaft: stainless steel
AXIS 295 Video Surveillance Joystick Installation Guide Rev. 1.0
Copyright © Axis Communications AB, 2006 Part No. 26393
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Axis 295 Installation guide

Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI