DFI COM100 FCC Certification

  • Hello! I've reviewed the Supplier's Declaration of Conformity for the DFI Computer-On-Module Carrier Boards. This document outlines compliance with FCC and ISED standards, ensuring the device operates without causing harmful interference and accepts any received interference. I'm ready to answer your questions about this document and the described products.
  • What type of device is covered by this declaration?
    What are the conditions of operation for this device?
    What standards does this product conform to?
Supplier’s Declaration of Conformity
According to 47 CFR, Part 15 of the FCC Rules
Manufacturer/Importer:
Name: DFI AMERICA, LLC.
Address: 15 Corporate Place South, Suite 201, Piscataway, NJ 08854, U.S.A.
Phone/Fax no: (732) 390-2815
Declares that the product:
EUT Description: Computer-On-Module Carrier Board
Trade Name: DFI; ITOX
Model Number: COM100
COM100-B; COM100XXXXXXXXXXXX (X=A~Z, a~z, 0~9, “-” or blank,
any character)
Conforms to the following technical standard:
FCC 47 CFR Part 15 Subpart B
Class B (DoC)
ANSI C63.4: 2014
ISED ICES-003 (Issue 7)
Identification of product:
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE AND,
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE
THAT MAY CAUSE UNDESIRED OPERATION.
Charlie Yang, General Manager
September 11, 2023, U.S.A.
/