Live Broadcasting PTZ Camera
User’s Manual
V1.0.0
2
Cybersecurity Recommendations
Mandatory actions to be taken towards cybersecurity
1. Change Passwords and Use Strong Passwords:
The number one reason systems get “hacked” is due to having weak or default passwords. It is
recommended to change default passwords immediately and choose a strong password
whenever possible. A strong password should be made up of at least 8 characters and a
combination of special characters, numbers, and upper and lower case letters.
2. Update Firmware
As is standard procedure in the tech-industry, we recommend keeping NVR, DVR, and IP
camera firmware up-to-date to ensure the system is current with the latest security patches and
fixes.
“Nice to have” recommendations to improve your network security
1. Change Passwords Regularly
Regularly change the credentials to your devices to help ensure that only authorized users are
able to access the system.
2. Change Default HTTP and TCP Ports:
● Change default HTTP and TCP ports for systems. These are the two ports used to
communicate and to view video feeds remotely.
● These ports can be changed to any set of numbers between 1025-65535. Avoiding the
default ports reduces the risk of outsiders being able to guess which ports you are using.
3. Enable HTTPS/SSL:
Set up an SSL Certificate to enable HTTPS. This will encrypt all communication between your
devices and recorder.
4. Enable IP Filter:
Enabling your IP filter will prevent everyone, except those with specified IP addresses, from
accessing the system.
5. Change ONVIF Password:
On older IP Camera firmware, the ONVIF password does not change when you change the
system’s credentials. You will need to either update the camera’s firmware to the latest revision
or manually change the ONVIF password.
6. Forward Only Ports You Need:
3
● Only forward the HTTP and TCP ports that you need to use. Do not forward a huge range of
numbers to the device. Do not DMZ the device's IP address.
● You do not need to forward any ports for individual cameras if they are all connected to a
recorder on site; just the NVR is needed.
7. Disable Auto-Login on SmartPSS:
Those using SmartPSS to view their system and on a computer that is used by multiple people
should disable auto-login. This adds a layer of security to prevent users without the appropriate
credentials from accessing the system.
8. Use a Different Username and Password for SmartPSS:
In the event that your social media, bank, email, etc. account is compromised, you would not
want someone collecting those passwords and trying them out on your video surveillance
system. Using a different username and password for your security system will make it more
difficult for someone to guess their way into your system.
9. Limit Features of Guest Accounts:
If your system is set up for multiple users, ensure that each user only has rights to features and
functions they need to use to perform their job.
10. UPnP:
● UPnP will automatically try to forward ports in your router or modem. Normally this would be a
good thing. However, if your system automatically forwards the ports and you leave the
credentials defaulted, you may end up with unwanted visitors.
● If you manually forwarded the HTTP and TCP ports in your router/modem, this feature should
be turned off regardless. Disabling UPnP is recommended when the function is not used in real
applications.
11. SNMP:
Disable SNMP if you are not using it. If you are using SNMP, you should do so only temporarily,
for tracing and testing purposes only.
12. Multicast:
Multicast is used to share video streams between two recorders. Currently there are no known
issues involving Multicast, but if you are not using this feature, deactivation can enhance your
network security.
13. Check the Log:
If you suspect that someone has gained unauthorized access to your system, you can check
the system log. The system log will show you which IP addresses were used to login to your
system and what was accessed.
14. Physically Lock Down the Device:
4
Ideally, you want to prevent any unauthorized physical access to your system. The best way to
achieve this is to install the recorder in a lockbox, locking server rack, or in a room that is
behind a lock and key.
15. Connect IP Cameras to the PoE Ports on the Back of an NVR:
Cameras connected to the PoE ports on the back of an NVR are isolated from the outside world
and cannot be accessed directly.
16. Isolate NVR and IP Camera Network
The network your NVR and IP camera resides on should not be the same network as your
public computer network. This will prevent any visitors or unwanted guests from getting access
to the same network the security system needs in order to function properly.
V
Foreword
General
This document elaborates on product profile, structure, installation and login.
Models
UAV-GA-V-2012TS
Safety Instructions
The following categorized signal words with defined meaning might appear in the Manual.
Symbol Note
It means highly potential danger. It will cause severe injury or
casualties if it fails to avoid.
It means moderate or low potential danger. It may cause slight or
moderate injury if it fails to avoid.
It means potential risk. It may cause device damage, data loss,
weaker performance or other unpredictable consequences if it
fails to avoid.
It means that it can help to solve some problems or save time.
It means the additional information, which is the emphasis and
supplement of the main body.
Revision History
No.
Version No.
Revision Content
Release Date
1 V1.0.0 First release 2018.2.28
Privacy Protection Notice
As the device user or data controller, you might collect personal data of others' such as face,
fingerprints, car plate number, Email address, phone number, GPS and so on. You need to be
in compliance with the local privacy protection laws and regulations to protect the legitimate
rights and interests of other people by implementing measures include but not limited to:
providing clear and visible identification to inform data subject the existence of surveillance
area and providing related contact.
VI
About the Manual
The Manual is for reference only. If there is inconsistency between the Manual and the
actual product, the actual product shall prevail.
We are not liable for any loss caused by the operations that do not comply with the Manual.
The Manual would be updated according to the latest laws and regulations of related
regions. For detailed information, see the paper User's Manual, CD-ROM, QR code or our
official website. If there is inconsistency between paper User's Manual and the electronic
version, the electronic version shall prevail.
All the designs and software are subject to change without prior written notice. The product
updates might cause some differences between the actual product and the Manual. Please
contact the customer service for the latest program and supplementary documentation.
There still might be deviation in technical data, functions and operations description, or
errors in print. If there is any doubt or dispute, please refer to our final explanation.
Upgrade the reader software or try other mainstream reader software if the Guide (in PDF
format) cannot be opened.
All trademarks, registered trademarks and the company names in the Manual are the
properties of their respective owners.
Please visit our website, contact the supplier or customer service if there is any problem
occurred when using the device.
If there is any uncertainty or controversy, please refer to our final explanation.
VII
Important Safeguards and Warnings
The following description is the correct application method of the device. Please read the
manual carefully before use, in order to prevent danger and property loss. Strictly conform to
the manual during application and keep it properly after reading.
Don’t touch the lens of PTZ camera directly. Use an air blower to blow away the dust or dirt
on the lens surface.
Don’t drip or splash liquids onto the device; don’t put around the device anything filled with
liquids, in order to prevent liquids from flowing into the device.
Please transport, use and store the device within allowed humidity and temperature range.
Don’t compress, vibrate violently or immerse the device during transportation, storage and
installation.
Use the standard components or accessories provided by manufacturer and make sure
that the device is installed and fixed by professional engineers.
Do not provide two or more power supply sources for the device; otherwise it might
damage the device.
VIII
Table of Contents
Cybersecurity Recommendations .................................................................................................................... 2
Foreword ................................................................................................................................................................ V
Important Safeguards and Warnings ........................................................................................................... VII
1 Product Profile ................................................................................................................................................. 1
1.1 Product Overview ...................................................................................................................................... 1
1.2 Product Function ....................................................................................................................................... 1
2 Device Structure ............................................................................................................................................. 3
2.1 Product Dimensions ................................................................................................................................. 3
2.2 Structural Component .............................................................................................................................. 5
3 Device Installation .......................................................................................................................................... 6
4 Device Operation ............................................................................................................................................... 7
4.1 Picture Acquisition Mode ......................................................................................................................... 7
4.1.1 SD Card .......................................................................................................................................... 7
4.1.2 Ground Control Station................................................................................................................. 7
4.2 Broadcasting Control ................................................................................................................................ 8
4.2.1 Ground Control Station................................................................................................................. 8
4.2.2 Remote Control ............................................................................................................................11
5 Device Upgrade ............................................................................................................................................. 12
6 Technical Parameters ..................................................................................................................................... 14
7 FAQ ................................................................................................................................................................... 15
1
1 Product Profile
1.1 Product Overview
As the core of unmanned aircraft system, airborne live broadcasting PTZ owns high-decibel
loudspeaker on basis of triaxial PTZ, adopts oriented vector control technology of permanent
magnet motor rotor field, high-precision triaxial servo autostability technology, wireless remote
audio transmission technology and compact portable design.
This product is mainly applied in multi-rotor drone to effectively prevent the effect of drone
posture change and jitter on the video image, so PTZ camera provides clear and stable video
images in all cases. When the ground control station connects broadcasting device, carry out
remote high-altitude visual broadcasting with the broadcasting device. It applies to forest fire
prevention and emergency event alarm scenarios.
1.2 Product Function
Some functions of the product are listed for your reference. Different types of product have
different functions. Please refer to actual functions of the product.
Triaxial Autostability
When pitch, roll and course axes rotate or shake, PTZ base and camera gesture are able to
keep stable, so video images are clear, without jittering.
Broadcasting Function
The ground control station connects broadcasting device to realize remote visual broadcasting
function. Sound pressure is 76 decibels at the distance of 100m.
Rotation Mode
Following mode: when the aircraft moves forward, backward, left and right horizontally, PTZ
follows to rotate, so surveillance direction is always consistent with aircraft movement direction.
Storage Function
Support industrial embedded multimedia card (eMMC), SD card, extended storage of solid
state disk and support to resume transmission after recovering from network outage
2
Cyclic coverage of storage media.
Alarm Function
Through network, give an alarm about camera abnormality, such as memory damages.
3
2 Device Structure
2.1 Product Dimensions
Figure 2-1 Front View (unit: mm)
4
Figure 2-2 Side View (unit: mm)
5
2.2 Structural Component
Figure 2-3
No.
Name
Function
1 Shock absorber ball
Reduce jitter of PTZ camera during flight; obtain clearer
pictures.
2 Shock absorber board
3 Installation screw Fix PTZ camera onto the aircraft.
4 Yaw motor Control horizontal direction of the camera.
5
Yaw rotation arm
6
Roll motor
Control rotation angle of roll axis.
7
Roll rotation arm
8
Pitch motor
Control rotation angle of pitch axis.
9
Camera
Take pictures.
10 Lens
11 SD card slot Install SD card.
12 SD card plug Cover outside the SD card slot is used to protect SD card
slot.
13 Loudspeaker Amplify sound in a remote and real-time way; broadcast to
the ground.
Table 2-1
6
3 Device Installation
This chapter explains device installation by taking NAVIGATOR X820 for example. Please refer
to actual product.
Insert data cable interface at the bottom of aircraft into the interface at the top of shock
absorber board, as shown in Figure 3-1.
Figure 3-1
Align 4 installation screws with bottom holes of the aircraft, and tighten them.
Fix PTZ camera onto the aircraft, as shown in Figure 3-2.
Figure 3-2
Turn on power supply of the aircraft, and wait for IMU (Inertial Measurement Unit)
calibration. After completing IMU calibration, the motor starts working while PTZ returns
to the center automatically.
Thus, PTZ camera has been installed completely.
7
4 Device Operation
4.1 Picture Acquisition Mode
4.1.1 SD Card
Open SD card plug with a hand, as shown in Figure 4-1.
Figure 4-1
Press SD card gently, and SD card will pop up. Pull out SD card.
Insert SD card into card reader, and connect the card reader with computer.
With the card reader, copy videos in SD card to the computer, and save them.
4.1.2 Ground Control Station
Ground control station and the device are in the same network segment by default, which
need no configuration.
One set of device has been paired before leaving factory, so the user doesn’t need to pair
again. If several devices are mixed and cannot be distinguished, please pair them before
operation. For details, please refer to drone user’s manual.
Turn on power supply of ground control station, remote control and aircraft.
Wireless module of the aircraft connects wireless module of ground control station and
8
remote control automatically.
During flight, through wireless module of ground control station, view pictures of PTZ
camera in a real-time way.
4.2 Broadcasting Control
Please ensure that external loud-speaker has been connected; otherwise, audio cannot be
broadcasted.
Try to speak into handheld microphone directly.
There is a broadcasting button on the left of handheld microphone. Press the button to
start broadcasting; release it to stop broadcasting.
Their device components vary depending on different types of NAVIGATOR.
Regarding NAVIGATOR X1100, ground control station is optional, whereas remote control
integrates some functions of ground control station. Therefore, microphone shall be
connected with remote control, in order to realize broadcasting function.
Regarding NAVIGATOR X820, ground control station is a standard configured device, so
microphone is connected with ground control station, in order to realize broadcasting
function.
4.2.1 Ground Control Station
When ground control station connects broadcasting device, “Audio Acquisition Input
Adjustment Bar” will be displayed in “Show Hidden Icon” on PC end of ground control
station.
In case of no sound or low volume, drag “Audio Acquisition Input Adjustment Bar” slider to
adjust volume of loudspeaker.
Realize broadcasting function through ground control station. Audio is transmitted via
microphone to the device; then, loudspeaker on the device will spread the audio to flight zone
of the aircraft.
Insert the external microphone connector into corresponding interface of ground control
station, as shown in Figure 4-2.
9
Figure 4-2
Meanwhile, “Audio Acquisition Input Adjustment Bar” will be displayed in “Show Hidden
Icon” on PC end of ground control station, as shown in Figure 4-3.
Figure 4-3
Click “Speak” icon at the main interface of ground control station.
When “Speak” turns to “Speaking” and the icon becomes red, the system displays
“Start Speak”, the user can start speak, as shown in Figure 4-4.
During speaking, loudspeaker may have a low or no sound, since audio acquisition
input of ground control station is set to be minimum volume. When the icon displays
“Speaking”, the user can adjust audio acquisition input volume.
10
Figure 4-4
Press the “Speak Button” of handheld microphone to speak, as shown in Figure 4-5.
Live broadcasting PTZ will play the audio in a real-time way.
Figure 4-5
On completion, release “Speak Button”.
To speak again, press “Speak Button” again.
After all speaking is finished, click “Speak” icon on the ground control station. The
system displays “Stop Speaking!”
“Speak” icon turns to green, which means that speaking is stopped.
11
4.2.2 Remote Control
When ground control station is optional, resort to remote control to broadcast.
The user doesn’t need to set the volume; it has been set to be maximum volume when
leaving factory.
Realize broadcasting function with remote control. The device needs to connect a patch cord to
transmit the audio to the device, and spread the audio with loudspeaker to flight zone of the
aircraft.
Connect external microphone with patch cord, as shown in Figure 4-6.
Figure 4-6
Insert the other end of patch cord into audio input interface of remote control, as shown
in Figure 4-7.
Figure 4-7
Press “Speak Button” of handheld microphone to speak. Broadcasting PTZ of the
aircraft will play the audio in a real-time way.
On completion, release “Speak Button” to stop speaking.
12
5 Device Upgrade
This chapter only applies to camera upgrade.
Only one device can be upgraded each time.
In case of device disconnection during upgrade, as long as ConfigTool stays at the upgrade
interface, the device will continue the last upgrade when it is connected with network again.
Precondition:
Upgrade package has been obtained.
PC has wireless network card.
In PC, select “Start > Control Panel > Network and Internet > Connections”.
The system displays “Connections” interface, to search WLAN of ground control
station.
After finding “Network Name” on the “Pair” interface, enter corresponding “Password”.
“Pair” interface of ground control station is shown in Figure 5-1.
Figure 5-1
Click “Join” to join WLAN of ground control station.
In PC, double click “ConfigTool.exe” to open quick configuration tool.
Click and the system displays upgrade interface, as shown in Figure 5-2.
Page is loading ...
Page is loading ...
Page is loading ...
/