2. One Control
  3. OC-CBODn Cranberry Over Drive

One Control OC-CBODn Cranberry Over Drive Owner's manual

  • Hello! I've analyzed the user manual for the ONE CONTROL BJF Series CRANBERRY OVERDRIVE. This overdrive pedal is designed for clean/light distortion and features a low cut trim pot, moderate compression, and fast response. It also offers controls for volume, treble and gain and a low-end frequency trimmer. I'm ready to answer your questions about it.
  • What is the CRANBERRY OVERDRIVE designed for?
    What kind of compression does the pedal offer?
    What kind of switching does the device use?
    What controls are available to the user?
CRANBERRY OVER DRIVE
BJF Series | OverDrive Pedal
Specifications
ALL COPYRIGHT RESERVED BY LEP INTERNATIONAL CO., LTD. 2022http://www.one-control.com/
LEP INTERNATIONAL CO., LTD.
User’s Manual V2.01
The CRANBERRY OVERDRIVE inherits the characteristics
of the original STRAWBERRY-RED overdrive however, a
low cut trim pot has been installed. Although both pedals
can achieve the same level of boost, the Cranberry is
perfect for clean/light distortion eect.
With moderate compression and fast response, this pedal
promises a superb lead boost for any genre of music.
It is safe to say that the Strawberry Overdrive hsa been
and continues to be one of the best selling BJF Series FX
pedals. For this reason, I decided to expand on this
models success with two other models; The Cranberry
and Lingonberry.
The Cranberry is a lower gain version of the Strawberry
Red Overdrive. In addition to having optimized control
over lower gain sounds, the filtering has been altered to
allow a flatter sound with more lows and highs. The
player can adjust 3 characteristics:
Volume: Output volume
Treble: Allows to change the tone from 'soft' to 'slightly
biting'
Drive: Sets the gain and distortion of the circuit.
Low: Trimmer switch that sets the low-end frequency
response
- Bjorn Juhl
Input Impedance: 330K
Output impedance: 25K
Drive voltage: 9 V
Current consumption: 4 mA
S / N ratio: -86 dB
Size: 39 W x 100 D x 31 H mm (not including projections)
47 W x 100 D x 48 H mm (including projections)
Weight: Approximately 160 g
True-Bypass Switching
High Quality Aluminum Enclosure
Power: 9V Battery or Standard DC Power Supply
Features
Bjorn's Description
/