RCA 7L400MDV User manual
- Category
- Portable DVD/Blu-Ray players
- Type
- User manual
Important Information
Product Registration
Please fill out the product registration card (packed separately) and return it immediately. Returning this card allows us to
contact you if needed.
Product Information
Keep your sales receipt to obtain warranty parts and service and for proof of purchase. Attach it here and record the serial
and model numbers in case you need them. The numbers are located on the product.
Model No. ____________________ Serial No. ____________________ Purchase Date: ________________________
Dealer/Address/Phone: ______________________________________________________________________________
CAUTION
THIS PRODUCT UTILIZES A
LASER. USE OF CONTROLS OR
ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES
OTHER THAN THOSE SPECIFIED
HEREIN MAY RESULT IN
HAZARDOUS RADIATION
EXPOSURE. DO NOT OPEN
COVERS AND DO NOT REPAIR
YOURSELF. REFER SERVICING TO
QUALIFIED PERSONNEL.
CLASS 1
LASER
PRODUCT
This symbol indicates "dangerous
voltage" inside the product that
presents a risk of electric shock or
personal injury.
WARNING
To reduce the risk of fire or
electric shock, do not expose this
product to rain or moisture. The
apparatus shall not be exposed
to dripping and splashing and no
objects filled with liquids, such as
vases, shall be placed on the
apparatus.
This symbol indicates
important instructions
accompanying the product.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Refer to the identification/rating label located on the back panel of your product for its proper
operating voltage.
FCC Regulations state that unauthorized changes or modifications to this equipment may void the
user’s authority to operate it.
Note:
This DVD/VCP player is designed and manufactured to respond to the Region
Management Information. If the Region number of a DVD disc does not
correspond to the Region number of this DVD/VCP player, this DVD/VCP player
cannot play the disc. The Region number for this DVD/VCP player is Region No 1.
This symbol indicates that this product
incorporates double insulation between
hazardous mains voltage and user
accessible parts. When servicing use only
identical replacement parts.
16230850 Cover 5/2/03, 1:01 PM2
Important Information
Important Information 1
FCC Statement: This equipment has been tested and found to comply with the limits of a Class B device, pursuant to Part 15 of the
FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
• Connect this equipment into an outlet on a circuit different from that to which the receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
Industry Canada Statement:
•This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
IMPORTANT SAFETY NOTE:
WHEN YOU SECURE THE PLAYER IN THE CAR YOU MUST STRAP IN THE PLAYER WITH THE LAP BELT IN THE
REAR SEAT. DO NOT USE EITHER SIDE SEAT BELT TO SECURE THE PLAYER. MAKE SURE THE BELT IS AS TIGHT
AS POSSIBLE, AS THE PLAYER COULD MOVE IF THE CAR MAKES ABRUPT STOPS AND/OR STARTS. YOU COULD
ENDANGER THE LIVES OF OCCUPANTS IF THE PLAYER IS NOT PROPERLY SECURED.
Things to Consider Before You Connect
Before looking at the specifics of the mobile DVD/VCP player, please take a moment to review the following precautions:
• When in a car, the mobile DVD/VCP player must be powered from the DC POWER jack on the back panel. The mobile DVD/
VCP player’s power should only be turned on when the car’s ignition is turned on.
Note: To prevent the car’s battery from discharging, disconnect the DC power cord from the cigarette lighter socket when not in
use.
•Use only the approved power cord supplied with your mobile DVD/VCP player. Always disconnect the power cord from the
lighter socket or wall outlet before disconnecting it from the player.
16230850 Cover 5/2/03, 1:01 PM3
Table of Contents
Chapter 1: Connections and Setup
Installing the Player in the Car ................................... 3
Using the Player in a Hotel, Office, or Home ............ 3
Connecting to a TV ...................................................... 4
The Back of the Mobile DVD/VCP Player ................... 5
Buttons and Controls of the DVD/VCP Player ........... 6
Put Batteries in the remote......................................... 7
The Remote Control .................................................... 8
Chapter 2: Playing Videocassettes and Discs
Playing Videocassettes .............................................. 10
The Remote Control Buttons Used for
VCP Mode ............................................................ 10
DVD Basics.................................................................. 11
Regional Coding .................................................. 11
Using Different Menus ........................................ 11
Types of Discs Your DVD/VCP Player will Play .... 11
Loading and Playing Discs .................................. 12
Playback features ...................................................... 13
Fast Motion Playback .......................................... 13
Skipping tracks or Songs ..................................... 13
Skipping Chapters ............................................... 13
Zoom .................................................................... 13
Using a Disc Menu ..................................................... 14
Using the Status Banner ........................................... 15
Selecting a Chapter ............................................. 15
Changing the Audio Language .......................... 16
Changing the Subtitle Language ....................... 16
Changing the Camera Angle .............................. 16
Using the Repeat Feature ................................... 16
Chapter 2: Playing Videocassettes and Discs
(continued)
Using the A-B Repeat Feature ............................ 17
Changing Surround Sound ................................. 17
Playing Audio CDs ..................................................... 18
Using the Repeat Feature ................................... 18
Playing MP3 Discs ...................................................... 19
Selecting Folders and Songs ............................... 19
Skipping Songs .................................................... 20
Selecting a Play Mode ......................................... 20
Program Play ....................................................... 21
Deleting the Playlist ...................................... 21
Using the Equalizer ............................................. 21
Chapter 3: DVD Menus
Using the DVD Setup Menu ....................................... 22
Display .................................................................. 22
OSD (On-Screen Display) Language ................... 24
Screen Saver ......................................................... 24
Disc Navigation .................................................... 25
Defaults ................................................................ 25
Sub Volume .......................................................... 25
Chapter 4: Other Information
Troubleshooting ......................................................... 26
Care and Maintenance .............................................. 28
Handling Cautions ..................................................... 28
Formation of Condensation ...................................... 29
Handling Discs ............................................................ 29
Cleaning Discs ............................................................ 29
Limited Warranty ....................................................... 30
Graphics and illustrations contained in this document are for representation only.
2Important Information
16230850 Cover 5/2/03, 1:07 PM4
Chapter 1: Connections & Setup
Chapter 1 3
Installing the Player in the Car
1. Rest the player in the center of a rear seat.
2. Insert the center seat’s (lap) safety belt through the player’s retainer holes.
Important Note: Secure the player with the lap seat belt as tight as possible so
that the player does not move around.
3. Fasten seat belt strap by inserting and passing it through the player’s two slot
openings.
4. Plug the DC power cable into the DC POWER jack on the back of the player.
Attach the other end of the cable to the car’s cigarette lighter socket or DC power
socket (consult your car owner’s manual for location).
Note: Make sure the car’s ignition is on before plugging the DC power cord into
the cigarette lighter socket.
5. Adjust the LCD screen for desired viewing.
6. If desired, connect headphones to either of the two PHONES jacks on the back of
the player.
Notes: When the player is not in use, the LCD screen should be closed firmly.
Using the Player in a Hotel, Office or Home
1. Place the bottom of the player carefully on a table or other resting surface.
2. Plug the jack end of the AC power adapter into the AC POWER jack on the back of the player. Attach the
other end of the AC adapter to a standard wall outlet. Make sure to insert the blades of the power cord fully
into the wall outlet.
3. Adjust the LCD screen for desired viewing.
4. If desired, connect headphones to either of the two headphone jacks on the back of the player.
Graphics and Illustrations contained in this document are for representation only.
16230850.01 C&S 5/2/03, 12:51 PM3
Chapter 1: Connections & Setup
4Chapter 1
Connecting to a TV in a Hotel, Office or Home
1. Connect audio cables (white and red) to the Audio Input Jacks on the back of the TV (sometimes labeled AUDIO L/MONO and
R) and to the AUDIO OUTPUT jacks (L AUDIO R) on the DVD/VCP player.
2. Connect the video cable (yellow) to the Video Input Jack on the back of the TV and to the VIDEO OUTPUT jack on the DVD/
VCP player.
3. Connect the AC power cord to the AC POWER jack on the DVD/VCP player and plug the other end into the wall outlet.
P
H
O
N
E
S P
H
O
N
E
S
E
X
T
E
RN
A
L
P
A
N
E
L
E
J
E
C
T
D
C
P
O
W
E
R
12
V
D
C
V
I
D
E
O
L
A
U
D
I
O
R
V
I
D
E
O
L
A
U
D
I
O
R
T
V
(
b
a
ck
p
a
n
e
l
)
CAB
L
E
/
A
N
T
E
NN
A
V
I
D
E
O
R
L
/
M
O
N
O
A
UD
I
O
L
R
I
N
O
U
T
O
U
T
P
U
T
I
N
P
U
T
16230850.01 C&S 5/2/03, 12:51 PM4
Chapter 1: Connections & Setup
Chapter 1 5
The Back of the Mobile DVD/VCP player
Tape slot Insert videocassette tapes into this slot.
PHONES Connect headphones to listen to the sound.
Note: When either or both of the headphones are in use, there will be no sound coming from the speakers.
OUTPUT VIDEO Sends the video playing in the DVD/VCP player to another component such as a TV.
OUTPUT L/R AUDIO Sends the audio playing in the DVD/VCP player to another component, such as a TV or sends the sound
to powered (amplified) speakers.
EXTERNAL PANEL Sends the audio and the video that’s playing in the DVD/VCP player to a component that has a compatible
8-pin input jack, such as an external monitor.
Notes: For vehicle use, connect the mobile DVD/VCP player to a factory equipped compatible display. To determine if the display
is compatible, check the owner’s manual provided with your vehicle.
Damage can occur to the mobile DVD/VCP player if you do not use a compatible monitor with a compatible
8-pin input jack.
P
H
O
N
E
S P
H
O
N
E
S
E
X
T
E
RN
A
L
P
A
N
E
L
E
J
E
C
T
D
C
P
O
W
E
R
12
V
D
C
V
I
D
E
O
L
A
U
D
I
O
R
V
I
D
E
O
L
A
U
D
I
O
R
O
U
T
P
U
T
I
N
P
U
T
Tape slot
16230850.01 C&S 5/2/03, 12:51 PM5
Chapter 1: Connections & Setup
6Chapter 1
EJECT Ejects the videocassette tape from the tape slot.
DC POWER Connect the AC adapter of the DC power cord to this jack from the car’s cigarette lighter
socket to give the unit power.
INPUT VIDEO Receives video from another component, such as a camcorder or an internet access device, so
you can see it on the DVD/VCP player’s LCD screen.
INPUT L/R AUDIO Receives audio from another component, such as a camcorder or an internet access
device, so you can hear what’s being played on the connected component.
LCD
Screen
Disc
Compartment
Buttons and Controls on the Mobile
DVD/VCP player
LCD Screen Video appears here (when watching a DVD disc).
Disc Compartment Open the lid to insert discs.
Buttons (listed alphabetically)
Arrow (up, down, left, right) buttons Use these buttons to access items on the LCD
screen.
DISC MENU Displays the disc menu. The content of the menu varies from disc to
disc.
DISPLAY Cycles through the display options by pressing repeatedly: brightness,
contrast, color, sharpness or tint. The level can then be adjusted by using the volume
up or down button.
DVD SETUP Displays the DVD/VCP player’s setup menu.
NEXT ( )Advances to the next chapter on a DVD disc, track on a CD or song
on an MP3. Advances a video cassette tape.
16230850.01 C&S 5/2/03, 12:51 PM6
Chapter 1: Connections & Setup
Chapter 1 7
OK When a menu is on the screen, selects the item that is highlighted.
PLAY ( )Begins play of a videocassette or disc.
POWER Turns the DVD/VCP player on or off.
PREV ( )Goes to the previous chapter on a DVD disc, track on a CD or song on an MP3. Rewinds a
video cassette tape.
SCREEN MODE Selects 16:9 or 4:3 screen mode.
SOURCE Toggles between VCP or DVD mode.
STATUS Accesses the disc status banner.
STOP ( )Stops disc play.
SURROUND Changes the Surround Sound options by pressing repeatedly: Surround Sound, 3D Surround
Sound, Hall Surround Sound or Surround Off.
VOLUME up and down buttons Increases or decreases the sound from the built-in speakers.
Put Batteries in the Remote
1. Remove the battery compartment cover on the remote.
2. Insert two new AAA batteries. Match the polarities (+ and -) on the batteries with the diagram on the
remote.
3. Put the battery compartment cover back on the remote.
16230850.01 C&S 5/2/03, 12:51 PM7
Chapter 1: Connections & Setup
8Chapter 1
The Remote Control (buttons listed in alphabetical order)
(Fast Forward) Scans forward on a disc (DVD mode only).
(Fast Reverse) Scans backward on a disc (DVD mode only).
(Previous) Goes to the previous chapter on a DVD disc, track on a CD or song
on an MP3.
(Next) Advances to the next chapter on a DVD disc, track on a CD or song on an
MP3 (DVD mode only).
Arrow (up, down, left, right) buttons Use these buttons to access items on the LCD
screen.
A-B Sets the beginning and end of the section you want to repeat (DVD mode only).
ANGLE Displays and selects the camera angles. Each time you press the button, the
angle changes. The number of angles varies from disc to disc (DVD mode only).
AUDIO Displays the Audio language status banner (DVD mode only).
DISC MENU Displays the disc menu. The content of the menu varies from disc to
disc (DVD mode only).
DISPLAY Cycles through the display options by pressing repeatedly: brightness,
contrast, color, sharpness or tint. The level can then be adjusted by using the volume up
or down button.
DVD POWER Turns the DVD/VCP player on and off.
DVD SETUP Displays the player’s setup menu.
EJECT Ejects the videocassette tape from the tape slot at the back of the player (VCP
mode only).
ENTER When a menu is on the screen, selects the item that is highlighted.
EQ Changes the equalizer options for MP3 discs by pressing repeatedly: EQ TYPE,
displays the frequency levels, EQ ON, EQ OFF (DVD mode only).
POWER
SURROUND
EQ
EJECT
STATUS
ANGLE
SUBTITLE
AUDIO +10
ZOOM
DISC
MENU
RETURN
A-B
REPEAT
DVD
SETUP
MUTE
DISPLAY
SLOW
SLOW
STOP
PLAY /
PAU S E
VOLU ME
1
4
2
5
7
3
6
89
0
ENTER
SOURCE
PLAY
PAU S E STOP REW FFWD
VCP POWER
16230850.01 C&S 5/2/03, 12:51 PM8
Chapter 1: Connections & Setup
Chapter 1 9
FFWD ( ) Fast forwards a video cassette tape (VCP mode only).
MUTE Reduces sound to an inaudible level.
PAUSE ( )Switches between play and pause (DVD mode only).
PAUSE ( )Pauses a video cassette tape (VCP mode only).
REPEAT Changes the REPEAT options by pressing repeatedly. The options vary depending on the type of
disc you are playing (DVD mode only).
RETURN Returns you to the previous chapter on a disc (DVD mode only).
REWIND () Rewinds a videocassette tape (VCP mode only).
SLOW ( )Plays a disc in slow, forward motion (DVD mode only).
SLOW( ) Plays a disc in slow, reverse motion (DVD mode only).
SOURCE Toggles between VCP and DVD mode.
STATUS Displays current disc information while the disc is playing (DVD mode only).
STOP ( )Stops playback.
SUBTITLE Displays the subtitle language of the DVD disc (if the disc was created with subtitles). Each time
you press the button, the subtitle language changes.
SURROUND Changes the Surround Sound options by pressing repeatedly: Surround Sound, 3D Surround
Sound, Hall Surround Sound or Surround Off.
VCP POWER Turns the Video Cassette Player on and off (DVD mode only).
VOLUME up and down buttons Increases or decreases the volume.
ZOOM Zooms in on the picture when playing a DVD disc (DVD mode only).
16230850.01 C&S 5/2/03, 12:51 PM9
Chapter 2: Playing Videocassettes and Discs
10 Chapter 2
Playing Videocassettes
To Load and Play a Videocassette
1. Lift up the LCD screen and position it to your liking.
2. Press the POWER button on the unit or the VCP POWER button on the remote to turn on the unit.
3. Insert a videocassette into the tape slot on the back of the VCP/DVD player.
4. Press PLAY on the unit or the PLAY button on the bottom of the remote.
5. If there is a disc loaded in the DVD compartment, the player will default to DVD mode. Press SOURCE on the remote or the
unit to put the player into VCP mode.
The Remote Control buttons used for VCP mode
The buttons at the bottom of the remote control work only in VCP mode. Use these
buttons to control playback of the videocassette.
EJECT Ejects the videocassette tape from the tape slot at the back of the player (VCP
mode only).
FFWD ( ) Fast forwards a video cassette tape (VCP mode only).
PAUSE ( )Pauses a video cassette tape (VCP mode only).
REWIND () Rewinds a videocassette tape (VCP mode only).
STOP ( )Stops playback .
VCP POWER Turns the Video Cassette Player on and off (DVD mode only).
EJECT
DISPLAY
SLOW
SLOW
STOP
PLAY /
PAU S E
VOLU ME
PLAY
PAU S E STOP REW FFWD
VCP POWER
Buttons used to control
videocassette playback
16230850.02 Discs 5/2/03, 1:20 PM10
Chapter 2: Playing Videocassettes and Discs
Chapter 2 11
DVD Basics
Regional Coding
Both the DVD/VCP player and the discs are coded by region. These regional codes must match in order for the disc to play. If the
codes don’t match, the disc won’t play. This unit’s code is region 1. Discs with other regional codes can’t be played in this unit.
Using Different Menus
Each disc is programmed with different features. There are two separate menu paths that you can use to access features: the disc’s menu
and the DVD’s status banner. Remember that a feature only works if the disc was programmed with that feature. For example, if you
choose subtitles, the subtitles only appear if the disc was created with subtitles.
•The Disc menu – The disc menu is part of each disc and is separate from the DVD’s status banner. The contents of each disc’s
menu vary according to how the disc was created and what features are included. Sometimes a disc’s menu appears automatically
when you insert the disc, or you can access it by pressing the DISC MENU button.
•The DVD’s status banner – The status banner appears across the top of the screen when a disc is playing. It can only be accessed
while you are playing a disc. It’s turned on and off with the STATUS button on the remote.
Types of Discs Your DVD Will Play
•DVD discs – Contain video.
•Audio discs – Contain musical or sound content only.
•MP3 discs – Contain audio files (for example, a CD-R with downloaded MP3 files).
Graphics and Illustrations contained in this document are for representation only.
16230850.02 Discs 5/2/03, 12:55 PM11
Chapter 2: Playing Videocassettes and Discs
12 Chapter 2
Loading and Playing Discs
Before you load a disc, make sure that it is compatible with the player. Note that the following discs CANNOT
be used with this player:
•Laserdisc
•CD-I, CD-ROM, DVD-ROM
•MiniDisc
•CD-G discs play audio only, not graphics
To Load and Play a Disc
1. Lift up the LCD screen and position it to your liking.
2. Press the POWER button to turn on the unit.
3. Press the button on the top of the player to open the disc tray. Place a disc gently into the tray with the
disc’s label facing up (double-sided discs have content on both sides, so you can place either side up).
The player reads the disc’s table of contents, and then one of following happens depending on how the disc was
programmed:
•No disc menu appears, a screen saver is displayed.
•The disc menu appears.
•The disc menu appears on the screen when you press PLAY/PAUSE.
•The disc starts playing automatically.
If no picture or screen saver is displayed, press the SOURCE button to put the player in DVD mode.
16230850.02 Discs 5/2/03, 12:55 PM12
Chapter 2: Playing Videocassettes and Discs
Chapter 2 13
Playback Features
Playback operations of DVDs and CDs vary among discs. Since this unit plays DVDs according to the disc
contents the software producers designed, some playback features may not be available. Refer to the instructions
packed with the DVDs for information.
Playback features aren’t usually available during the opening credits of a movie. If a playback feature isn’t
available, the invalid symbol (a hand icon) appears on the screen when you press a button.
Fast Motion Playback (Picture Scan)
To scan quickly through the disc when you’re playing it, use the Picture Scan feature.
1. Press the Fast Reverse ( ) or Fast Forward ( ) button when you’re playing a disc.
2. Press the button again to scan at a faster speed. Each time you press the button, the scanning speed
increases until you reach maximum scanning speed.
Skipping Tracks or Songs
When a CD or MP3 disc is playing, use the Previous ( ) or Next ( ) button to skip a track or song. Press
to advance to the next track or song. Press to go to the previous track or song.
Skipping Chapters
When a DVD disc is playing, use the Previous ( ) or Next ( ) button to skip to the next chapter. Press
to advance to the next chapter. Press to go to the previous chapter.
Zoom
When a DVD disc is playing, press the ZOOM button to zoom in on the picture. Each press zooms closer.
When you reach the maximum zoom, press ZOOM again to go to normal playback.
16230850.02 Discs 5/2/03, 12:55 PM13
Chapter 2: Playing Videocassettes and Discs
14 Chapter 2
Using a Disc Menu
A disc is capable of having an on-screen menu that is separate from the DVD’s on-screen
status banner. The disc menu might only contain a list of the titles and chapters, or it
may allow you to change features such as language and playback settings.
Although the content and operation of disc menus vary from disc to disc, the following
example will give you an idea of what to expect.
1. When the disc is first inserted and/or you press DISC MENU on the player or the
remote, the disc menu appears.
2. Press the up or down arrow button on the remote to highlight the section of the disc
menu you want to choose, and press ENTER. In the example on the left, Language
has been selected.
3. Press the up or down arrow button to select a language, and press ENTER.
4. Press PLAY/PAUSE to play the disc.
This is an example of a disc menu. The
menus on discs vary because the disc
menu is created by the disc’s author.
In this example, English is highlighted.
Press ENTER on the remote to play the
disc with English dialog.
16230850.02 Discs 5/2/03, 12:55 PM14
Chapter 2: Playing Videocassettes and Discs
Chapter 2 15
Using the Status Banner
While a disc is playing, press the STATUS button on the player or the remote to bring up the Status Banner.
The Status Banner shows the status of DVD features and allows you to change them while the disc is playing. If
nothing is selected after a few seconds, the banner disappears. The options below show you what happens when
you press the STATUS button.
Press STATUS 1 time Brings up the Status Banner and shows the current title, chapter and time.
Press STATUS 2 times Shows the current subtitle information.
Press STATUS 3 times Shows the current audio language and audio format.
Press STATUS 4 times Shows the current surround sound setting.
Press STATUS 5 times Shows the current angle setting.
Press STATUS 6 times Shows the current A-B repeat setting.
Press STATUS 7 times Shows the current repeat setting.
Press STATUS 8 times Turns the Status Banner off.
TITLE 01/12 CHAPTER 23 /42
00:00:18
Selecting a Chapter
Because DVD discs use digital technology, a title can be divided into individual chapters
(similar to tracks on a CD). You can skip to a specific chapter by using the Chapter feature
in the Status Banner.
1. While a disc is playing, press STATUS (the Status Banner appears).
2. Press the right arrow button to highlight the chapter number.
3. Press the up or down arrow button to go to the next or previous chapter. Press OK to
select the chapter you want to play.
Note: The Chapter feature only works on discs formatted with separate chapters.
The Status Banner
16230850.02 Discs 5/2/03, 12:55 PM15
Chapter 2: Playing Videocassettes and Discs
16 Chapter 2
Changing the Audio Language
Use the AUDIO button on the remote to change the Audio Language setting for the
current DVD disc. Press the AUDIO button consecutively to access different audio options.
As you access an option, the audio language and format change at that time.
Notes:
The audio feature only works if the disc was created with multiple languages.
Some discs allow you to change the audio format from the disc’s menu, if available.
AUDIO 2/3:AC-3 5.1 ENGLISH
Changing the Subtitle Language
Use the SUBTITLE button on the remote to change the subtitle language for the current DVD disc. Press SUBTITLE consecutively
to access the subtitle options. As you access an option, the subtitle language changes at that time. To turn subtitles off, press
SUBTITLE until the SUBTITLE OFF option appears.
Note: The subtitle feature only works if the disc was created with multiple subtitles.
Changing the Camera Angle
Some discs contain multiple angles of a particular scene or sequence. Press the ANGLE button on the remote to access the different
angles. As you access an angle, the angle changes at that time.
Note: The angle feature only works if the disc was created with multiple angles. Currently, very few region 1 discs have multiple angles.
Using the Repeat Feature
The default mode for the Repeat feature is OFF. Pressing the REPEAT button on the remote consecutively changes the repeat options:
•CHAPTER REPEAT ON
•TITLE REPEAT ON
•REPEAT OFF
As you access the repeat options, the repeat option changes at that time. For example, if you access CHAPTER REPEAT ON, the
chapter will start playing again from the beginning when you get to the end of the chapter. The selected repeat option loops repeatedly
until you turn it off.
The Audio Banner
16230850.02 Discs 5/2/03, 12:55 PM16
Chapter 2: Playing Videocassettes and Discs
Chapter 2 17
Using the A-B Repeat Feature
A-B Repeat lets you define a specific segment on the disc that you want to repeat. The A-B Repeat feature works
the same for all discs. For example, you might like watching the dogfight in the movie Top Gun. To watch this
scene over and over:
1. Find the spot on the disc that is a few seconds before the beginning of the scene you want to repeat.
2. Press the A-B button on the remote. This sets the A point (A TO B SET A appears).
3. When you get to the part of the disc that you want to be the end of the repeated segment (the B point),
press the A-B button again. This sets the end point (A TO B SET B appears). The segment repeats until you
turn Repeat off by pressing the A-B button again (A TO B OFF appears).
Changing Surround Sound
You can use this feature to add a surround sound effect to the audio. While a disc is playing, press
SURROUND. Pressing SURROUND on the remote or player consecutively changes the surround sound
options:
•SURROUND SOUND
•3D SURROUND
•HALL SURROUND
•SURROUND OFF
As you toggle through the options, the surround sound changes at that time.
16230850.02 Discs 5/2/03, 12:55 PM17
Chapter 2: Playing Videocassettes and Discs
18 Chapter 2
Playing Audio CDs
When playing an audio CD, the Status Banner appears automatically. It displays the current track and the
amount of time for that track playing, the total amount of time on the disc and the current time running on the
disc. The options below show you what happens when you press the STATUS button.
Tip
You can also advance
to the next chapter by
pressing , or go to
the preceding chapter
by pressing .
Press STATUS once SINGLE ELAPSED appears along with the current track playing and the
time of that track.
Press STATUS twice SINGLE REMAIN appears along with the current track playing and the
amount of time left on the track.
Press STATUS 3 times TOTAL ELAPSED appears along with the current track playing and the
total time playing on the CD.
Press STATUS 4 times TOTAL REMAIN appears along with the current track playing and the
amount of time left on the CD.
Press STATUS 5 times Turns off the Status Banner.
Using the Repeat Feature
The default mode for the Repeat feature is OFF. Pressing REPEAT on the remote or player consecutively changes the repeat options:
•REP-ONE – repeats the track that is playing
•REP-ALL – repeats the disc that is playing
•REPEAT OFF
As you access the repeat options, the repeat setting changes automatically to match the setting that appears on the screen. For example,
if REP-ONE appears on the screen, the track that is playing will automatically start playing from the beginning once you reach the end
of that track. The selected repeat option loops repeatedly until you turn it off.
16230850.02 Discs 5/2/03, 12:55 PM18
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
RCA 7L400MDV User manual
- Category
- Portable DVD/Blu-Ray players
- Type
- User manual
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI