2. Baxton Studio
  3. MAG-14-Natural/Black-CT

Baxton Studio MAG-14-Natural/Black-CT, 20012720 Assembly Instructions

  • Hello! I've reviewed the assembly instructions for the Cabinet MAG 14 CT. This document provides detailed steps on how to assemble the product including attaching various parts with dowels, screws, and cam locks, along with attaching the door and legs. I'm ready to assist you with any questions you may have about the assembly process.
  • What should be used to attach pieces 4 & 5 to piece 6?
    How are the door handles (F) attached to piece 7?
    How should piece 1 be attached to the unit?
Attach piece 4 & 5 to piece 6 using wooden
dowels (D), screws (A), cam dowels (C) and
cam locks (B)
On piece 7, attach the door handles (F)
using screws (G).
On piece 1, secure the catch (H) using screws (I).
Use the pre-drilled holes for guidance.
Attach piece 3 and assembled 4,5,6 piece to
piece 2 using wooden dowels (D), screws (A).
Turn the unit upside down, slot piece 8 into the
ridges, put wooden dowels (D) on each part as
shown.
Attach piece 1 to the unit using cam dowels (C)
and cam locks (B). Connect door 7 using bar
hinges (J).
Attach metal plate (E) to piece 2 using screws (K). Tighten the leg (8) clockwise direction, add leg
pad (L) as shown.
/