2. ROOMS TO GO
  3. 18118112

ROOMS TO GO 18118112, 18118124 Assembly Instructions

  • Hello! I've reviewed the assembly instructions for the Lounge Chair. This document outlines the necessary steps for assembling the chair, including a parts list and safety instructions. I'm ready to assist you with any questions you may have about the assembly process or the chair itself.
  • How many adults are recommended for assembly?
    What parts are included in the package?
    What should I do with the plastic packaging?
Important safety instructions:
Please carefully read all instructions before assembling.
For your safety and ease, assembly by two or more adults is recommended.
Keep instructions for future use.
Pre-assembly:
Remove all parts and hardware from box along with any plastic protective packaging.
Do not discard any contents until after assembly is complete to avoid accidentally
discarding small parts or hardware
Parts List QTY
1
4
Hardware List
QTY
4
Step 3:Place chair upright on a level surface. Assembly is complete.
Description
H1
Item
P2 Legs
ASSEMBLY INSTRUCTIONS
DESCRIPTION: Lounge Chair
Step 1: Take out the legs and hardwares from package.
Step 2: Turn the chair upside down and lay on protective carpet, screw in the legs (P2 ) into the
screw holes underneath the base using the plastic washers(H1).
Item Description
P1 Chair
Plastic Wahser
P2
Thank you for your purchase
ADDITIONAL NOTE ABOUT SAFETY: BOLTS MAY LOOSEN DURING NORMAL EVERYDAY USE. THEY SHOULD BE
PERIODICALLY INSPECTED AND RE-TIGHTENED TO PREVENT DAMAGE OR INJURY. ALWAYS CHECK TO BE SURE THAT
ALL
HARDWARE IS KEPT TIGHTENED.
/