Gigabyte AGC310 Owner's manual

Type
Owner's manual
Bureau Veritas
Consumer Products Services Division (Shanghai)
No. 168, Guanghua Road, Zhuanqiao Town,
Minhang, Shanghai China, 201108
Tel.:86-21-24081888 Fax:86-21-64890042
Email: [email protected]uveritas.com
Http:www. bureauveritas.com/cps
This report is governed by, and incorporates by reference, the Conditions of Testing as posted at the date of issuance of this report at
http://www.bureauveritas.com/cps and is intended for your exclusive use. Any copying or replication of this report to or for any other person or entity, or
use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples
identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample
was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results
thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or
omission caused by our negligence; provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A
failure to raise such issue within the prescribed time shall constitute you unqualified acceptance of the completeness of this report, the tests conducted
and the correctness of the report contents.
CHANGXING HEPING XINXING FURNITURE FACTORY
Technical Report:
(6618)128-1560
Date Received:
MAY.07, 2018
Page 1 of 4
LING YUN
CHANGXING HEPING XINXING FURNITURE FACTORY
HUICHELING VILLAGE,HEPING,ZHEJIANG PROVINCE,CHINA
Sample Description:
BASE
Manufacturer:
/
PO No.:
/
Buyer:
/
Style No
/
Country of Origin:
/
Country of Destination:
/
Color:
/
SKU No.:
/
Protocol No.:
/
Previous Report No.:
/
EXECUTIVE SUMMARY:
TEST REQUESTED
CONCLUSION
Remark
1)
ANSI BIFMA X5.1: 2017 partial test as per client request
PASS
/
REMARK:
The client specifies the test methods and requirements.
CHANGXING HEPING XINXING FURNITURE FACTORY
Technical Report: (6618)128-1560
MAY.08, 2018
Page 2 of 4
BVCPS (SHANGHAI) GENERAL CONTACT INFORMATION FOR THIS REPORT
TELEPHONE NO
E-MAIL:
86-21-24166888
[email protected]uveritas.com
BUREAU VERITAS
CONSUMER PRODUCTS SERVICE DIVISION (SHANGHAI)
Laboratory Test location:
No. 368, Guangzhong Road, Zhuanqiao Town, Minhang, Shanghai.
No. 168, Guanghua Road, Zhuanqiao Town, Minhang, Shanghai.
Hyde Bao
PRODUCT LINE MANAGER(HARDLINE DIVISON)
CHANGXING HEPING XINXING FURNITURE FACTORY
Technical Report: (6618)128-1560
MAY.08, 2018
Page 3 of 4
1.ANSI BIFMA X5.1: 2017 partial test as per client request
Evaluation
Citation / Method
Criteria
Results
Rating
Drop test - dynamic -
functional load
ANSI/BIFMA X5.1-17
Sec. 7
There shall be no loss of serviceability
when a test bag weighing 102 kg (225 lb.)
is raised 152 mm (6 in.) above the
uncompressed seat and released one time.
M
PASS
Drop test - dynamic -
proof load
ANSI/BIFMA X5.1-17
Sec. 7
There shall be no sudden and major
change in the structural integrity of the
chair (Loss of serviceability is acceptable)
when a proof load of 136 kg (300 lb.) is
raised 152 mm (6 in.) above the
uncompressed seat and released one time.
M
PASS
Caster or chair base
durability test - cyclic -
pedestal base chairs
ANSI/BIFMA X5.1-17
Sec. 16.1
[Durability cycling]
There shall be no loss of serviceability
when a 122 kg (270 lb.) load is on the
seat of the chair and cycled 2,000 cycles
over the obstacles then 98,000 cycles on a
smooth, hard surface without obstacles.
M
PASS
ANNEX I: SUBMISSION DESCRIPTION
Sample Description: BASE
The overall dimension was recorded as:
7.7 cm (D) x 4.3 cm (W) x 9.0 cm (H)
Sample weight: 0.5 kg
CHANGXING HEPING XINXING FURNITURE FACTORY
Technical Report: (6618)128-1560
MAY.08, 2018
Page 4 of 4
EXHIBIT
END
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Gigabyte AGC310 Owner's manual

Type
Owner's manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI